
Home Licenses Specialty Contractor License Louisiana
Specialty Contractor · Commercial Carpentry
Louisiana Specialty Contractor License: Requirements, Exam and How to Apply
In Louisiana, carpentry is a specialty classification on the commercial side. Using the Louisiana State Licensing Board for Contractors’ requirements, we walk you through who needs it, how to qualify, the exam, reciprocity and renewing.
Last updated October 27, 2026 from Louisiana State Licensing Board for Contractors requirements
Exam time
2 hrs
For the Carpentry exam; the Business & Law course has no time limit
Time to get license
Varies
We couldn’t confirm an experience minimum; timing depends on the course, the exam and Board approval
Continuing ed
Required
Ahead of every renewal; hour count isn’t published
Do you need a Louisiana specialty contractor license?
You do if your commercial carpentry jobs reach $50,000 or more with labor and materials counted. Carpentry sits under Building Construction as a subclassification, and Louisiana expects you to hold it before you bid or begin work.
You need the license when
- A commercial job comes to $50,000 or more with labor and materials counted
- You do or bid on finish or rough carpentry
- You build, repair or maintain millwork on commercial jobs
Exceptions
- Commercial carpentry jobs below $50,000 in labor and materials
- Home building and other residential jobs need one of Louisiana’s separate residential licenses, not this commercial one
What happens if you work without a license
We couldn’t confirm the exact penalty amounts. As a rule, the LSLBC can look into unlicensed contracting and discipline those involved, so have your license before bidding on a job above the threshold.
How to get a Louisiana specialty contractor license in 6 steps
- Check that the carpentry classification fits First step
This is the license you need for commercial millwork or finish or rough carpentry on jobs of $50,000 or more. - Get your financial statement affidavit ready Ahead of applying
Your statement needs to show net worth of $10,000 or more, and it can’t be older than 12 months when you apply. - File the Commercial Application Submit your application online
Set up an account on the LSLBC application portal and file your application there. - Finish the Business & Law course Untimed
The separate exam has been replaced by an online Business & Law course. You work through it on the LSLBC portal on your own schedule. - Get pre-approved, then pass the Carpentry exam Test day
After approval, book the exam at a testing center. You get 120 minutes for 60 open-book questions, and 70% passes. - Get your license Once you’re approved
When your application, exam and course are all done, the LSLBC grants your Louisiana carpentry contractor license.
Louisiana specialty contractor application checklist
Everything for your Louisiana application on one page
- Commercial Application filed with the LSLBC
- Financial statement affidavit with $10,000+ in net worth
- Statement no older than 12 months when you apply
- Business & Law course finished
- LSLBC approval for the exam
- Carpentry exam passed
The Louisiana specialty contractor license
Louisiana’s commercial Building Construction license includes carpentry as one of its classifications. It takes in millwork along with finish and rough carpentry.
CARP Commercial
Carpentry Contractor
Covers building, repairing or maintaining millwork and finish and rough carpentry on commercial jobs of $50,000 or more.
| Exam | B&L course plus Carpentry exam |
| Limit | Not stated |
Louisiana specialty contractor license requirements
There’s a single set of requirements for the Louisiana carpentry license. The main pieces are the trade exam, the Business & Law course and proof of net worth.
| Requirement | Carpentry Contractor |
|---|---|
| Application | Commercial Application filed with the LSLBC |
| Net worth | At least $10,000, shown on a financial statement affidavit |
| How recent the statement must be | Dated within 12 months of when you apply |
| Business & Law | Online course from the LSLBC (it took the place of the old exam) |
| Trade exam | Carpentry Contractor exam; you need pre-approval |
| Experience | Not stated |
The Louisiana specialty contractor exam
You finish the Business & Law course and pass a single trade exam. Since the Carpentry exam is open book, finding things fast in your references counts as much as knowing the content.
Format
Open book
Questions
60
Passing score
70%
Exam vendor
PSI
Content and scoring
- Carpentry exam: 120 minutes for 60 questions
- Covers siding, drywall, finish carpentry, formwork and rough carpentry, doors and windows, insulation and safety
- Approved references include The Gypsum Construction Handbook, BCSI, the 2021 International Building Code and OSHA 1926
- You can tab, highlight and write in your references
- The Business & Law course teaches estimating and bidding, licensing law, contracts, managing finances, taxes and jobsite safety
Retakes and scheduling
- Retake rules: not published
- You need pre-approval before booking the exam
- You’ll find testing centers in the state’s bigger cities
- You pay PSI the $125 exam fee when you register, and you lose it if you miss the exam or don’t bring ID
Books and codes for this exam (open book)
The Louisiana Carpentry Contractor exam is open book. You can write in, highlight and tab the references below and use them during the exam; the Business & Law requirement is an online course, not a separate exam.
| Reference | Edition | How it’s used |
|---|---|---|
| OSHA 29 CFR 1926: Construction Industry Regulations | Not stated | Allowed in exam |
| Carpentry & Building Construction, Student Edition | 2016 | Allowed in exam |
| Building Component Safety Information (BCSI) | Not stated | Allowed in exam |
| The Gypsum Construction Handbook | 7th edition | Allowed in exam |
| Finish Carpenter’s Manual | Not stated | Allowed in exam |
| International Building Code (IBC) | 2021 | Allowed in exam |
Prep for the Louisiana specialty contractor exam
Our exam prep course, Total Prep and complete bundle for the Louisiana specialty contractor exam. Prices are coming soon.
Books for this exam
Renewing your Louisiana specialty contractor license
You have to complete continuing education before every renewal in Louisiana. Your license expires on the anniversary of the date it was first issued, and renewals run for one, two or three years. The LSLBC doesn’t post its renewal fees online. State law sets a $100 ceiling on the renewal fee and adds an optional construction education fee of $100 a year.
Renewal cycle
1, 2 or 3 years
CE hours
Required (hour count isn’t published)
Renewal fee
Not stated
Late penalty
As much as $50 once a 15-day grace period ends
Licensed in another state?
Five states have reciprocity agreements with Louisiana for this license. Before applying, check with the LSLBC on exactly what you can skip.
Alabama: has a reciprocity agreement
The LSLBC can tell you which requirements you can skip.
Arkansas: has a reciprocity agreement
The LSLBC can tell you which requirements you can skip.
Mississippi: has a reciprocity agreement
The LSLBC can tell you which requirements you can skip.
Tennessee: has a reciprocity agreement
The LSLBC can tell you which requirements you can skip.
Utah: has a reciprocity agreement
The LSLBC can tell you which requirements you can skip.
All other states: no agreement
You apply as a new candidate, finish the Business & Law course and pass the Carpentry exam.
City and county rules in Louisiana
Your state license is good for commercial carpentry anywhere in Louisiana. Permits and inspections are still up to local governments.
What the state covers
- Commercial contractor licensing and classifications
- Trade exam approval and the Business & Law course
- Handling renewals and CE rules
- Reciprocity with other states
What your city and county cover
- Permits and inspections for building work
- Local occupational or business licenses
- Enforcing local codes
The board that oversees Louisiana carpentry contractors
Licensing authority
Louisiana State Licensing Board for Contractors
225-765-2301
What the board does
- Grants and renews specialty and commercial contractor licenses
- Offers the Business & Law course online
- Decides who can take trade exams
- Sets the continuing education rules for renewing
Louisiana specialty contractor license: common questions
Do I need a Louisiana license for carpentry work?
A carpentry contractor license is required on commercial jobs that reach $50,000 with labor and materials counted, and you have to hold it before bidding or beginning work.
Does Louisiana still give a Business & Law exam for contractors?
No. The separate exam has been replaced by an untimed Business & Law course, which you take on the LSLBC application portal.
Can I use books on the Louisiana carpentry exam?
Yes. The approved references can be tabbed, highlighted and written in. You get 120 minutes for 60 questions and need 70% to pass.
How much net worth do I need for this Louisiana license?
You need $10,000 or more, documented on a financial statement affidavit dated within 12 months of applying.
Will Louisiana accept my out-of-state carpentry contractor license?
For this license, Louisiana’s reciprocity agreements are with Alabama, Arkansas, Mississippi, Tennessee and Utah. The LSLBC can tell you what each one lets you skip.
Do I need continuing education to renew this Louisiana license?
Yes. You must finish continuing education before every Louisiana renewal. Ask the LSLBC how many hours apply now.
Where this information comes from
- Louisiana State Licensing Board for Contractors
- LSLBC online application and Business & Law course
- LSLBC, Carpentry Contractor examination information
- PSI, LSLBC Candidate Information Bulletin (trade exam fees)
- LSLBC, Adding a Classification to an Existing License (fee form, PDF)
- LSLBC Contractors Licensing Law and Rules (Blue Book, PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Louisiana State Licensing Board for Contractors.
