Hawaii Specialty Contractor License: Requirements, Exam and How to Apply, Hawaii Specialty Contractor License, Hawaii, Carpentry Framing, Drywall, Electronic Systems, Hawaii Contractors License Board, how to get a Hawaii Specialty Contractor License, Hawaii Specialty Contractor License requirements, Hawaii Specialty Contractor License exam, Hawaii licensing board, Hawaii contractor license, license application steps, exam reference books, Minimum age, Experience, Business & Law exam, Trade exam, Books for the trade exam, Closed book, Documents, Insurance

Home Licenses Specialty Contractor License Hawaii

Specialty Contractor · C-6, C-12 & C-15

Hawaii Specialty Contractor License: Requirements, Exam and How to Apply

Working in carpentry framing (C-6), drywall (C-12) or electronic systems (C-15) in Hawaii? This page walks you through qualifying, applying, passing both exams and renewing your specialty contractor license.

Last updated October 27, 2026 from Hawaii Contractors License Board requirements

Exam time

4–5 hrs

Trade exam (1–2 hrs) plus Business & Law (3 hrs)

Time to get license

~4 yrs

You need 4 years of supervisory experience before Board approval and testing

Continuing ed

Not required

These classifications have no CE

Do you need a Hawaii specialty contractor license?

Hawaii gives carpentry framing, drywall and electronic systems work their own specialty contractor classifications. If you contract for any of that work, the Hawaii Contractors License Board has to license you in the class that fits it.

You need the license when

  • Your contracts include framing in wood or metal, siding, roof sheathing or wood trusses (C-6)
  • Your jobs involve nonstructural metal studs or gypsum wallboard systems, from layout and install through taping and texture (C-12)
  • Alarm work (fire or burglar), intercoms, public address, clock systems or CATV are part of what you install (C-15)

Exceptions

  • Conduit installation for those systems falls outside the C-15 license
  • Any work beyond your classification’s scope calls for another license class
  • We couldn’t confirm owner-builder or other exemptions, so check them with the Board

What happens if you work unlicensed

Working without the correct license can bring Board action and fines, and it can make it hard to get paid. Not sure a job needs a license? Call the Professional & Vocational Licensing Division at 808-586-3000.

How to get a Hawaii specialty contractor license in 6 steps

  1. Choose your classification First
    Figure out whether your work fits C-6, C-12 or C-15, and confirm you have 4 years of supervisory experience from the last 10 years.
  2. Pull your paperwork together Before you apply
    Have these ready: proof of insurance, a credit report, your entity appointment, experience certificates and the form listing your projects in chronological order.
  3. Get Board pre-approval
    Send in a complete application from the Board’s application page, or call 808-586-3000 with questions. Exams can’t be scheduled until the Board approves you.
  4. Book your exams with PSI Once approved
    Schedule Business & Law and your trade exam through PSI, online or at 833-333-4754. You’ll find test centers in the state’s larger cities.
  5. Pass both tests Exam day
    Business & Law is closed book, with 80 questions in 3 hours and a 75% passing score. The trade exam takes 1–2 hours.
  6. Stay insured Ongoing
    Your insurance has to stay in force for as long as you’re licensed, with proof kept on file at the Board.

Hawaii specialty contractor application checklist

Everything for the Hawaii application on one page

  • 4 years of supervisory experience from the last 10
  • Experience certificates
  • Chronological history of projects form
  • A credit report and your entity appointment
  • Proof of insurance filed with the Board
  • Passing results on Business & Law and your trade exam

Hawaii specialty contractor license classes

Specialty contractors in Hawaii are licensed by C classification. You’ll take the Business & Law exam and the trade exam for your class. All three classes below share the same qualifying requirements.

C-6 Framing

Carpentry Framing

Siding, roof sheathing, wood trusses, wood and metal framing, and anything else the industry counts as carpentry framing.

ExamB&L + C-6 (60 questions)
LimitNot stated

C-12 Interiors

Drywall

All gypsum wallboard systems and nonstructural metal stud, channel and joist framing, plus the taping, texturing and incidental spray-on barriers that go with them.

ExamB&L + C-12 (25 questions)
LimitNot stated

C-15 Low voltage

Electronic Systems

Covers electronic equipment and controls like fire and burglar alarms, intercoms, public address, CATV, clock systems and electric door openers. Conduit isn’t included.

ExamB&L + C-15 (28 questions)
LimitNot stated

Requirements for each Hawaii specialty contractor class

You qualify the same way for each class. Only the trade exam differs: how long it runs and whether books are allowed.

RequirementC-6 Carpentry FramingC-12 DrywallC-15 Electronic Systems
Minimum age181818
Experience4 years supervising, within the last 104 years supervising, within the last 104 years supervising, within the last 10
Business & Law exam80 questions, 3 hrs, 75%80 questions, 3 hrs, 75%80 questions, 3 hrs, 75%
Trade exam60 questions, 2 hrs25 questions, 1 hr28 questions, 1 hr
Books for the trade examClosed bookClosed bookOpen book (NEC 2020, NFPA 72 2016)
DocumentsExperience certificates, project history, a credit report and an entity appointmentExperience certificates, project history, a credit report and an entity appointmentExperience certificates, project history, a credit report and an entity appointment
InsuranceOngoing coverage kept on file with the BoardOngoing coverage kept on file with the BoardOngoing coverage kept on file with the Board

The Hawaii specialty contractor exam

You’ll take two PSI exams: Business & Law, and the trade exam for your class. Business & Law is closed book, and so are the C-6 and C-12 trade exams. For C-15, you can bring approved code books.

Format

Computer-based at PSI centers

Questions

80 + 25 to 60

Passing score

75% (Business & Law)

Exam vendor

PSI

Scoring and content

  • Business & Law: you get 180 minutes for 80 questions, with no books, and need 75%. Expect contracts, lien and labor law, estimating, licensing, taxes, OSHA safety and public works law
  • C-6 runs 120 minutes with 60 questions on framing walls, floors, ceilings, stairs and roofs, plus layout, estimating, metal framing and OSHA
  • C-12 gives you 60 minutes for 25 questions about materials, installation, plan reading, estimating, and taping and finishing
  • C-15 allows NEC 2020 and NFPA 72 (2016) in the room; it’s 28 questions in 60 minutes on grounding, power supplies, access control, burglar alarms and fire alarm circuits
  • Trade exam passing scores: we couldn’t confirm them

If you need to retake

  • You pay a new $80 PSI fee for every attempt, and retesting may be possible within two business days
  • Scheduling opens only once the Board approves your application
  • Call PSI at 833-333-4754 to schedule or reschedule
  • A failed exam can hold up your start under the license for a long time

Books and codes for this exam (varies)

The Business and Law exam and the C-6 Carpentry Framing and C-12 Drywall trade exams are closed book, so their books are for studying only. The C-15 Electronic Systems trade exam is open book, and the approved code books can go into the exam with you.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC) — C-15 Electronic Systems exam2020Allowed in exam
NEC Handbook — C-15 Electronic Systems exam2020Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code — C-15 Electronic Systems exam2016Allowed in exam
NTC Blue Book: Low Voltage Systems — C-15 Electronic Systems examNot statedStudy only
NTC Yellow Book: Video Security Systems — C-15 Electronic Systems examNot statedStudy only
OSHA 1926 Construction Regulations — C-15 and C-6 examsNot statedStudy only
International Building Code (IBC) — C-6 Carpentry Framing and C-12 Drywall exams2018Study only
Carpentry and Building Construction, Student Edition — C-6 and C-12 exams2016Study only
The Gypsum Construction Handbook — C-6 and C-12 exams7th editionStudy only
NASCLA Contractor’s Guide to Business, Law and Project Management (Hawaii) — Business and Law exam1st editionStudy only
Hawaii Revised Statutes Chapter 103: Expenditure of Public Money and Public Contracts — Business and Law examNot statedStudy only
Hawaii Revised Statutes Chapter 104: Wages and Hours of Employees on Public Works — Business and Law examNot statedStudy only
Hawaii Administrative Rules Title 12, Chapter 22: Wage Determinations — Business and Law examNot statedStudy only

The sources we checked list the NTC Blue Book, NTC Yellow Book and OSHA 1926 as not allowed in the C-15 exam room.

Prep for the Hawaii specialty contractor exam

Our exam prep course, Total Prep and complete bundle for the Hawaii specialty contractor exam. Prices are coming soon.

Books for this exam

Renewing your Hawaii specialty contractor license

All Hawaii contractor licenses expire September 30 of even-numbered years, whenever you got yours. Your renewal has to reach the Board before then. You don’t need continuing education. Renewing every two years costs $353 for a sole proprietor or contracting entity, or $208 for a responsible managing employee.

Renewal cycle

Every 2 years (Sept 30 of even years)

CE hours

None

Renewal fee

$353 ($208 RME)

Late penalty

$50 plus renewal fee

Licensed in another state?

We found no reciprocity agreement that lets you skip Hawaii’s exams for these classifications.

No reciprocity

Expect to apply as a new applicant: meet the experience rule and pass both exams. If you’re licensed in another state, ask the Board.

City and county rules in Hawaii

The state license is good statewide, but your county still runs permits and inspections for each job.

State handles

  • Specialty contractor licenses and classes
  • Reviewing applications and pre-approving exams
  • Exams (through PSI)
  • Renewals and insurance on file

City and county handle

  • Building permits
  • Inspections
  • Job-site rules set locally

Who oversees specialty contractors in Hawaii

Licensing authority

Hawaii Contractors License Board

Professional & Vocational Licensing Division, Department of Commerce and Consumer Affairs

808-586-3000

cca.hawaii.gov/pvl

What the board does

  • Reviews applications and clears candidates to test
  • Issues and renews licenses by classification
  • Holds each contractor’s proof of insurance
  • Manages the two-year renewal cycle, which ends September 30 of even years

Hawaii specialty contractor license: common questions

How much experience does a Hawaii specialty contractor license require?

You need four years of supervisory experience from the last 10 years. That’s true for C-6, C-12 and C-15 alike.

What exams are required for a Hawaii specialty contractor license?

You take two: Business & Law (80 questions, 3 hours, 75% to pass) and your classification’s trade exam. You schedule both with PSI once the Board approves your application.

Can you bring books to the Hawaii specialty contractor exams?

Only for C-15. The Electronic Systems exam is open book with NEC 2020 and NFPA 72 (2016); Business & Law, C-6 and C-12 are closed book.

Can a Hawaii C-15 license holder install conduit?

No. Alarm, intercom and similar electronic equipment and controls fall under the C-15, but conduit for those systems does not.

Do Hawaii specialty contractors need continuing education?

No CE is required for these classifications. You do have to renew before September 30 of every even-numbered year.

When does a Hawaii contractor license expire?

Every license expires September 30 of an even-numbered year, and the Board must receive your renewal before that date.

Do Hawaii specialty contractors need insurance?

Yes. Your coverage has to stay continuous as long as you’re licensed, and the Board keeps proof of it on file.

Where this information comes from

  1. Hawaii DCCA, Professional & Vocational Licensing Division
  2. Hawaii Contractors License Board, Applications and publications
  3. PSI Exams, candidate scheduling
  4. HRS Chapter 103, Expenditure of Public Money and Public Contracts
  5. HRS Chapter 104, Wages and Hours of Employees on Public Works
  6. HAR Title 12, Chapter 22, Wage Determinations (PDF)
  7. Hawaii Contractors License Board, Requirements and Application, Sole Proprietor (PDF)
  8. Hawaii Contractors License Board, Contractor FAQ (fees) (PDF)
  9. HAR Title 16, Chapter 53, Fees (PDF)
  10. PSI, Hawaii Contractor Examinations Candidate Information Bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Hawaii Contractors License Board.