Arkansas Specialty Contractor License: Requirements, Exam and How to Apply, Arkansas Specialty Contractor License, Arkansas, Residential Carpentry, Framing, Millwork, Cabinets, Commercial Carpentry, Framing, Millwork, Cabinets, Limited Drywall, Unlimited Drywall, Residential Insulation, Commercial Insulation, Arkansas Contractors Licensing Board, how to get a Arkansas Specialty Contractor License, Arkansas Specialty Contractor License requirements, Arkansas Specialty Contractor License exam, Arkansas licensing board, Arkansas contractor license, Compiled

Home Licenses Specialty Contractor License Arkansas

Specialty Contractor · Carpentry, Drywall & Insulation

Arkansas Specialty Contractor License: Requirements, Exam and How to Apply

Three Arkansas specialty trades are covered here: drywall; insulation; and carpentry, framing, millwork and cabinets. Learn who needs a license, what the Arkansas Contractors Licensing Board requires and how the PSI exams work.

Last updated October 27, 2026 from Arkansas Contractors Licensing Board requirements

Exam time

75 min

For the trade exam; Business & Law takes another 120 min

Time to get license

Varies

For drywall, references must show 2 years of experience

Continuing ed

Not required

You don’t need CE to renew

Do you need an Arkansas specialty contractor license?

Usually, yes. Arkansas requires a license for structural changes to a single-family home once the job goes over $2,000, and specialty trades such as carpentry and insulation get their own residential and commercial licenses. Drywall licenses come in limited and unlimited versions depending on job size.

You need the license when

  • Structural changes to a single-family home on any job above $2,000
  • Contracting for carpentry, framing, millwork or cabinet work, residential or commercial
  • Contracting for insulation work, residential or commercial
  • Drywall jobs of $50,000 or more (these need the unlimited license)

Exceptions

  • Structural work on a home of $2,000 or less is under the licensing threshold
  • For drywall jobs below $50,000 (labor and materials counted), a limited license works in place of an unlimited one

Penalties for unlicensed work

We couldn’t confirm specific penalty amounts. The Arkansas Contractors Licensing Board can act against anyone who contracts without the license they need, so get yours before you bid or sign anything.

How to get an Arkansas specialty contractor license in 6 steps

  1. Choose your trade and class Before you start
    For carpentry or insulation, pick residential or commercial. For drywall, pick limited (below $50,000) or unlimited.
  2. Gather experience and references Before you apply
    Find three references who can be verified and who know your construction work. If you’re applying for drywall, your references must show 2 years of experience.
  3. Get your business paperwork ready Before you apply
    If you’re an LLC, corporation, LP or LLP, you need proof that you’re in good standing with the Arkansas Secretary of State.
  4. Pass your PSI exams Exam day
    You take Business & Law (120 minutes for 50 questions) and your trade exam (75 minutes for 30 questions, pass at 70%). Book through PSI or by calling (855) 257-1620.
  5. Get financials, bond and insurance ready Before you apply
    You need a compiled balance sheet or financial statement, a $10,000 contractor’s bond if your trade requires one, and proof that you comply with workers’ comp rules.
  6. Apply to the Board
    The last stop is the Arkansas Contractors Licensing Board, which takes your application. Questions go to 501-372-4661, and the board’s site is aclb.arkansas.gov.

Arkansas specialty contractor application checklist

Your Arkansas application on one page

  • Three references who can be verified
  • Proof of your experience in the trade
  • Passing scores on Business & Law and your trade exam
  • Compiled balance sheet or financial statement
  • $10,000 contractor’s bond, if your trade needs one
  • Proof of workers’ comp and good standing with the Secretary of State

Arkansas specialty contractor license classes

Each specialty trade has its own license in Arkansas. Carpentry and insulation each have a residential and a commercial version. Drywall is limited or unlimited, and PSI gives one drywall exam for residential and another for commercial.

CFM-R Residential

Residential Carpentry, Framing, Millwork, Cabinets

Carpentry, framing, millwork and cabinets on residential jobs, covering how wood elements are built, installed and finished.

ExamB&L + carpentry exam
LimitNot stated

CFM-C Commercial

Commercial Carpentry, Framing, Millwork, Cabinets

The same wood scope as the residential license, applied to commercial jobs.

ExamB&L + carpentry exam
LimitNot stated

DRY-L Smaller jobs

Limited Drywall

Drywall jobs below $50,000, counting labor and materials.

ExamB&L + drywall exam
LimitUnder $50,000

DRY-U Any size

Unlimited Drywall

Drywall jobs with no size limit.

ExamB&L + drywall exam
LimitNo limit

INS-R Residential

Residential Insulation

On homes and duplexes: installing, repairing and replacing vapor retarders and batt, blown, spray-applied, rigid board and reflective insulation.

ExamB&L + insulation exam
LimitNot stated

INS-C Commercial

Commercial Insulation

Insulation systems on larger and non-residential jobs, HVAC insulation and soundproofing included, with tougher financial and bonding rules.

ExamB&L + insulation exam
LimitNot stated

Requirements for each Arkansas specialty contractor class

All three trades require three references and a passing score on Business & Law. The experience and paperwork differ slightly from trade to trade.

RequirementCarpentry, Framing, Millwork, CabinetsDrywall (unlimited)Insulation
Experience1 year, can be verified2 years, backed by referencesRelevant and can be verified
References3, can be verified33, can be verified
ExamsBusiness & Law and tradeBusiness & Law and drywallBusiness & Law and trade
Financial statementCompiled, showing positive net worthCompiled balance sheet less than 1 year oldCompiled, showing positive net worth
Contractor’s bond$10,000Not stated$10,000
Workers’ compensationProof of complianceRequired if you have more than 1 employeeProof of compliance
Business entity in good standingNot statedRequired for LLCs, corporations, LPs and LLPsNot stated

The Arkansas specialty contractor exam

There are two exams: Business & Law, which everyone takes, and the trade exam for your specialty. You can use references on the trade exams, so practice finding answers in them quickly.

Format

Open book

Questions

30 + 50

Passing score

70% (trade)

Exam vendor

PSI

Scoring and content

  • Trade exams: 30 questions in 75 minutes, pass at 70%
  • Business & Law: 50 questions in 120 minutes
  • Carpentry covers materials, fabrication, installation, finishing and OSHA safety
  • Drywall covers drywall installation, taping and finishing, ceilings and acoustical systems, veneer plaster and OSHA safety
  • Insulation covers batt and roll, blown, spray-on, rigid board and reflective insulation, plus vapor retarders and OSHA safety

Retakes

  • You pay $84 per exam, and that fee applies again for a retake
  • Read the PSI Candidate Information Bulletin for your trade
  • Call PSI at (855) 257-1620 to schedule or reschedule

Books and codes for this exam (open book)

The Carpentry, Framing, Millwork and Cabinets, Drywall and Insulation exams are open book, as is the Arkansas Business and Law exam, so you can bring the permitted references into the test. The official lists are in the trade outlines linked from the PSI candidate information bulletin for each trade.

ReferenceEditionHow it’s used
OSHA 29 CFR 1926: Safety and Health Regulations for Construction — Carpentry, Drywall and Insulation examsNot statedAllowed in exam
Carpentry & Building Construction, Student Edition — Carpentry and Insulation exams2016Allowed in exam
Finish Carpenter’s Manual — Carpentry, Framing, Millwork and Cabinets examNot statedAllowed in exam
The Complete Illustrated Guide to Furniture & Cabinet Construction — Carpentry, Framing, Millwork and Cabinets examNot statedAllowed in exam
PDCA Craftsman Manual & Textbook — Carpentry, Framing, Millwork and Cabinets exam8th editionAllowed in exam
International Building Code (IBC) — Drywall exam2015Allowed in exam
The Gypsum Construction Handbook (USG) — Drywall exam7th editionAllowed in exam
Insulation Handbook (Bynum and Rubino) — Insulation exam2000Allowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management (Arkansas edition) — Business and Law exam8th editionAllowed in exam

The Insulation Handbook is out of print, so you may have trouble finding a copy.

Prep for the Arkansas specialty contractor exam

Our exam prep course, Total Prep and complete bundle for the Arkansas specialty contractor exam. Prices are coming soon.

Books for this exam

Renewing your Arkansas specialty contractor license

Renewing an Arkansas specialty contractor license takes no continuing education. It’s a yearly renewal: a commercial license costs $50 and a Home Improvement license costs $25.

Renewal cycle

Annual

CE hours

Not required

Renewal fee

$50 commercial, $25 Home Improvement

Late penalty

Not stated

Licensed in another state?

If you hold a substantially equivalent license in another jurisdiction, Arkansas may grant reciprocity. We couldn’t confirm any specific partner states.

Other states: case by case

A substantially equivalent license may qualify for reciprocity. Before you apply, ask the Board if yours does.

City and county rules in Arkansas

The Arkansas Contractors Licensing Board issues your state specialty license. The job-site side is handled by cities and counties.

What the state handles

  • Specialty contractor licenses and classes
  • Exams, given by PSI
  • Financial, bonding and workers’ comp rules
  • Renewals

What cities and counties handle

  • Building permits and inspections
  • Local business licenses
  • Local code enforcement

Who oversees specialty contractors in Arkansas

Licensing authority

Arkansas Contractors Licensing Board

501-372-4661

aclb.arkansas.gov

What the board does

  • Issues and renews specialty and contractor licenses
  • Sets the experience, financial and bond requirements
  • Reviews requests for reciprocity
  • Enforces the licensing rules

Arkansas specialty contractor license: common questions

Do you need a license to do drywall in Arkansas?

Yes, when the Board regulates the work. With a limited drywall license you can take jobs under $50,000 (labor and materials counted), and an unlimited license has no size limit.

When does Arkansas require a contractor license for home projects?

In Arkansas, you need a license for structural changes to a single-family home once the job goes over $2,000.

Which exams do you need for an Arkansas specialty contractor license?

There are two, both given by PSI: Business & Law (120 minutes, 50 questions) and your specialty’s trade exam (75 minutes, 30 questions, pass at 70%).

Are the Arkansas specialty contractor trade exams open book?

Yes. You can use references on the carpentry, drywall and insulation exams. The PSI Candidate Information Bulletin for each trade lists which references are allowed.

How much experience do you need for an Arkansas specialty contractor license?

That depends on your trade. For drywall, three references must show 2 years of construction experience. Carpentry asks for 1 year of experience that can be verified, and insulation asks for relevant experience that can be verified.

Does Arkansas require continuing education to renew a specialty contractor license?

No. You can renew these Arkansas specialty licenses without any continuing education.

Does Arkansas accept an out-of-state specialty contractor license?

If your license from another jurisdiction is substantially equivalent, you may get reciprocity. Ask the Board to review your license.

Where this information comes from

  1. Arkansas Contractors Licensing Board
  2. PSI, Arkansas contractor exam scheduling
  3. PSI Candidate Information Bulletin (carpentry, framing, millwork, cabinets)
  4. PSI Candidate Information Bulletin (drywall)
  5. PSI Candidate Information Bulletin (insulation)
  6. Arkansas Contractors Licensing Board, Commercial license application (10/2026)
  7. Arkansas Contractors Licensing Board, Home Improvement Specialty license application (1/2025)
  8. Arkansas Contractors Licensing Board, online license renewal
  9. Arkansas Contractors Licensing Board, Renew a license

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Arkansas Contractors Licensing Board.