California Solar Contractor License: Requirements, Exam and How to Apply, California Solar Contractor License, California, Solar Contractor, California Contractors State License Board (CSLB), how to get a California Solar Contractor License, California Solar Contractor License requirements, California Solar Contractor License exam, California licensing board, California contractor license, license application steps, exam reference books, Experience, Required (amount isn’t published), Trade exam, Law & Business exam, Required, Exam format, Closed book

Home Licenses Solar Contractor License California

Solar Contractor · C-46 Specialty

California Solar Contractor License: Requirements, Exam and How to Apply

Here’s the work covered by California’s C-46 Solar classification, the two exams you’ll sit for, and each step from building experience to holding a license.

Last updated October 27, 2026 from California Contractors State License Board requirements

Exam time

Not stated

The C-46 trade exam and Law & Business

Time to get license

Varies

Depends on how long the required experience takes you

Continuing ed

Not stated

The sources we checked don’t list it

Do you need a California solar contractor license?

California puts solar contracting in the C-46 Solar Contractor classification. Once you have the required experience, you pass two exams: the C-46 trade exam and the California Law & Business exam.

You need the license when

  • Putting in photovoltaic (PV) and thermal solar energy systems
  • Making changes to solar energy systems already in place
  • Upkeep and repair of PV and thermal solar systems

Exceptions

  • Other building trades fall outside a C-46, unless the work is needed to put in a thermal or PV solar system
  • We couldn’t confirm any exemptions for solar work, so check with the CSLB before bidding

If you work without a license

We couldn’t confirm the specific penalties. Generally, the CSLB can act against anyone contracting without the proper license, so have your C-46 in hand before bidding on solar work.

How to get a California solar contractor license in 6 steps

  1. Gain the experience you need Before applying
    Get hands-on experience in solar work. When you have as much as the Board requires, you can begin the license process.
  2. Apply to the CSLB Before the exam
    Send in your application. The Board has to pre-approve you before you get an exam date.
  3. Schedule your exams After pre-approval
    Book both exams through PSI and pay $51.43 for each.
  4. Pass the C-46 trade test Exam day
    Expect questions on job planning and pricing, mounting panels and collectors, installing and commissioning PV, solar thermal, service and upkeep, and safety. Books aren’t allowed.
  5. Pass the Law & Business test Exam day
    Expect questions on how a company is set up, money matters, hiring, bonds, insurance, liens, contracts, licensing and public works. Books aren’t allowed.
  6. Get your license After you pass
    Wrap up whatever the Board still needs from you, and your C-46 license is issued.

California solar contractor application checklist

Everything California asks for, on one page

  • Proof of your solar experience
  • A finished CSLB application
  • The Board’s pre-approval to test
  • A passing result on the C-46 trade exam
  • A passing result on Law & Business

The California solar contractor license

In California, solar work has its own C-class specialty contractor license.

C-46 Specialty

Solar Contractor

Covers putting in, changing, maintaining and fixing photovoltaic and thermal solar energy systems. Work in other trades is allowed only when the solar install needs it.

ExamC-46 and Law & Business
LimitNot stated

California solar contractor license requirements

These are the C-46 requirements we could confirm. Check anything marked “Not stated” with the CSLB.

RequirementC-46 Solar Contractor
ExperienceRequired (amount isn’t published)
Trade examC-46 Solar
Law & Business examRequired
Exam formatClosed book
Exam pre-approvalThe Board must give it

The California solar contractor exam

There are two exams to pass, and you can’t bring books to either: the C-46 Solar trade exam and the California Law & Business exam.

Format

Closed book

Questions

Not stated

Passing score

Not stated

Exam vendor

PSI

What the exams cover

  • C-46: job planning and pricing, and mounting solar panels and collectors
  • C-46: installing and commissioning PV systems, and installing solar thermal
  • C-46: service, running and upkeep of systems, and safety
  • Law & Business: setting up and financing a company, hiring rules, bonds, insurance and liens
  • Law & Business: rules for contracts and licensing, and public works

If you need a retake

  • If you fail, you can test again after 21 calendar days
  • Every try costs the $51.43 PSI exam fee, which you pay when you rebook
  • You get 18 months after your application is accepted to pass both exams; after that, you reapply and pay new fees

Books and codes for this exam (closed book)

The CSLB exams are closed book, so no references are allowed in the test site. These are the study references CSLB suggests in its study guide.

ReferenceEditionHow it’s used
California Building Code2022Study only
California Electrical Code2022Study only
California Energy Code2022Study only
California Fire Code2022Study only
California Mechanical Code2022Study only
California Plumbing Code2022Study only
California Distributed Generation ProgramsNot statedStudy only
California Solar InitiativeNot statedStudy only
Operating Guidelines for Certifying Solar Water Heating Systems (OG-300)Not statedStudy only
Photovoltaic SystemsNot statedStudy only
Solar Hot Water Fundamentals: Siting, Design, and Installation2011Study only
Solar ProgramsNot statedStudy only
Solar ResearchNot statedStudy only
Cal/OSHA General Industry, Construction and Electrical Safety Orders (Title 8)2023Study only
Ugly’s Electrical ReferencesNot statedStudy only
Understanding NEC Req for Solar Photovoltaic Systems, 20202020Study only
Uniform Solar, Hydronics and Geothermal Code2021Study only

Prep for the California solar contractor exam

Our exam prep course and complete bundle for the California solar contractor exam. Prices are coming soon.

Books for this exam

Renewing your California solar contractor license

Renewing an active C-46 costs $450 for a sole owner or $700 for other entities. Ask the CSLB about your renewal cycle and anything else it requires.

Renewal cycle

Not stated

CE hours

Not stated

Renewal fee

$450 for a sole owner; $700 for other entities (active)

Late penalty

$675 for a sole owner; $1,050 for other entities (active, fee and penalty combined)

Licensed in another state?

We couldn’t confirm any reciprocity agreements for the C-46 Solar license.

No reciprocity agreements found

We couldn’t confirm any, so expect to apply as a new applicant and pass both exams. The CSLB can tell you if your license from another state helps.

City and county rules in California

The state issues your C-46 license. Permits and inspections for solar installs still go through cities and counties.

What the state covers

  • C-46 licenses and other classifications
  • Reviewing applications and booking exams
  • Disciplining license holders

What cities and counties cover

  • Building and electrical permits for solar installs
  • Inspections
  • Local business licenses, where a city or county requires one

Who oversees solar contractors in California

Licensing authority

California Contractors State License Board (CSLB)

Contact details aren’t listed in the sources we checked; check the CSLB website

What the board does

  • Issues C-46 licenses and other contractor licenses
  • Checks experience and pre-approves people to test
  • Books the trade exam and the Law & Business exam
  • Takes disciplinary action against licensed contractors

California solar contractor license: common questions

Which license do you need to install solar panels in California?

You need the C-46 Solar Contractor license. It lets you put in, change, maintain and fix photovoltaic and thermal solar energy systems.

How many exams are there for a California C-46 license?

You take two: the C-46 Solar trade exam and the California Law & Business exam.

Can you use books on the California solar exam?

No. Books aren’t allowed on either California exam.

Can you book the California contractor exam yourself?

No. The Board has to pre-approve your application first. After that, you book each exam through PSI and pay the $51.43 exam fee.

Can you do other construction work with a California C-46 license?

Only when the work is needed to put in a thermal or PV solar system. Any other building trade calls for its own license.

What does the California C-46 trade exam cover?

It tests job planning and pricing, mounting panels and collectors, putting in and commissioning PV, installing solar thermal, service and upkeep, and safety.

Where this information comes from

  1. California Contractors State License Board, C-46 Solar Contractor classification
  2. California Contractors State License Board, Law & Business examination
  3. California Contractors State License Board, List of All CSLB Fees
  4. PSI, CSLB Law and Business Licensing Examination Information Guide
  5. California Contractors State License Board, My Original Exam Application was Accepted
  6. PSI, CSLB Solar (C-46) Licensing Examination Information Guide

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the California Contractors State License Board.