North Carolina Residential Contractor License: Requirements, Exam and How to Apply, North Carolina Residential Contractor License, North Carolina, Limited, Intermediate, Unlimited, North Carolina Licensing Board for General Contractors, how to get a North Carolina Residential Contractor License, North Carolina Residential Contractor License requirements, North Carolina Residential Contractor License exam, North Carolina licensing board, North Carolina contractor license, license application steps, exam reference books, Residential exam, Project limit

Home Licenses Residential Contractor License North Carolina

Residential Contractor · Limited, Intermediate & Unlimited

North Carolina Residential Contractor License: Requirements, Exam and How to Apply

In North Carolina, the residential license has three levels based on project size. This guide shows you how to choose one, meet the money requirements, pass the exam and keep the license active.

Last updated October 27, 2026 from North Carolina Licensing Board for General Contractors requirements

Exam time

3.5 hrs

210 minutes, partly open book

Time to get license

Varies

Comes down to your financials and board approval

Continuing ed

8 hrs

Needed for each renewal

Do you need a North Carolina residential contractor license?

Bidding or contracting residential building construction in North Carolina requires a license from the Licensing Board for General Contractors. Either a Residential or a Building license works, and each comes in three size levels.

You need the license when

  • You bid or contract construction work on residential units
  • The job includes driveways, sidewalks and site work
  • The job includes the homes’ water and wastewater systems

Exceptions

  • For commercial projects, you need a Building contractor license, not a Residential one
  • We couldn’t confirm any dollar thresholds or owner exemptions, so check with NCLBGC before you count on one

What happens if you work unlicensed

The Licensing Board for General Contractors enforces the law and can take action against anyone who contracts without a license or above their level. Keep each project under your level’s limit.

How to get a North Carolina residential contractor license in 5 steps

  1. Pick Residential or Building, plus your level Before you start
    Residential only covers homes. Choose Limited, Intermediate or Unlimited according to the biggest single project you’ll take.
  2. Get your finances in order Before you apply
    Your level sets the working capital, net worth or surety bond you have to show. For Intermediate and Unlimited, that means an audited statement or a bond.
  3. Apply to the board Before the exam
    File with NCLBGC, including verified education and work experience. You can’t test until you’re approved.
  4. Book and pass the exam Test day
    After approval, schedule through PSI or by phone at 855-340-3707. To pass, get 63 of the 90 questions right.
  5. Wrap up your license in NC CLiC After you pass
    Use the board’s NC CLiC portal to finish the licensing steps, and you’ll receive your North Carolina Residential Contractor License.

North Carolina residential contractor application checklist

Your North Carolina application on one page

  • License type (Residential or Building) and level picked
  • Working capital, net worth or surety bond to match your level
  • Audited financial statement, if you’re going for Intermediate or Unlimited
  • Education and work experience, verified
  • Board approval to sit for the exam
  • A passing score on the Residential Contractor exam

North Carolina residential contractor license classes

All residential licenses cover the same kind of work. Your level decides the biggest single project you’re allowed to take and the financial proof you have to show.

LTD Smaller jobs

Limited

Home construction, with each project capped at $750,000.

ExamResidential exam
Limit$750,000

INT Mid-size jobs

Intermediate

Home construction, with each project capped at $1,500,000. You need a bond or an audited financial statement.

ExamResidential exam
Limit$1,500,000

UNL No size cap

Unlimited

Home construction on projects of any size. You need a bond or an audited financial statement.

ExamResidential exam
LimitUnlimited

Requirements for each North Carolina residential contractor class

Every level takes the same exam. The difference is the financial proof you show: working capital, net worth or a surety bond.

RequirementLimitedIntermediateUnlimited
Project limit$750,000$1,500,000Any size
Working capital$17,000$75,000$150,000
Or net worth$80,000Not an optionNot an option
Or surety bond$350,000$1,000,000$2,000,000
Financial statementNot publishedAuditedAudited
ExamResidentialResidentialResidential
Continuing ed8 hrs per renewal8 hrs per renewal8 hrs per renewal

The North Carolina residential contractor exam

All levels take the same Residential Contractor exam. It’s partly open book: you can bring some references in, tabbed and highlighted, but not others.

Format

Partly open book

Questions

90

Passing score

63 correct

Exam vendor

PSI

Scoring and content

  • 90 questions in 210 minutes, with 63 correct needed to pass
  • Subjects: estimating, plan reading, safety, business and law, plus site work, concrete, masonry, carpentry, roofing and associated trades
  • Plus: licensing, liens, One Call, erosion and sedimentation control, residential code and sports fields
  • You can bring in NC Residential Code 2018, NC Administrative Code and Policies 2018, NC OSHA Construction Industry, and NASCLA’s NC general contractor guide (10th ed.)
  • Under HB 47, the 2024 NC Building Codes won’t take effect until spring 2027

Retakes

  • Every attempt, whether your first or a repeat, costs the $79 PSI fee
  • As long as your application information is still valid, you can retake as often as you want within a 12-month period
  • To schedule or reschedule, call PSI at 855-340-3707

Books and codes for this exam (varies)

The North Carolina Residential Contractor exam is partially open book. You can tab and highlight the four permitted references and bring them into the test; the other books on the reference list are for studying only and can’t be used in the exam room.

ReferenceEditionHow it’s used
OSHA Construction Industry Regulations (29 CFR 1926)Not statedAllowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management, General Contractors (North Carolina edition)10th editionAllowed in exam
North Carolina State Building Code: Residential Code2018Allowed in exam
North Carolina State Building Code: Administrative Code and Policies2018Allowed in exam
Carpentry & Building Construction, Student Edition2016Study only
Roofing Construction & EstimatingRevised editionStudy only
Modern MasonryNot statedStudy only
Pipe and Excavation ContractingRevised editionStudy only
Contractor’s Guide to Quality Concrete Construction4th editionStudy only
Building Component Safety Information (BCSI)Not statedStudy only
NC Administrative Code, Title 15A, Chapter 4: Sedimentation ControlNot statedStudy only
North Carolina General Statutes Chapter 113A, Article 4Not statedStudy only

The 2024 North Carolina Building Codes have been delayed and aren’t expected to take effect until spring 2027, so the exam stays on the 2018 codes for now.

Prep for the North Carolina residential contractor exam

Our exam prep course, Total Prep and complete bundle for the North Carolina residential contractor exam. Prices are coming soon.

Books for this exam

Renewing your North Carolina residential contractor license

You renew a North Carolina residential license every year by December 31 and complete 8 hours of continuing education. The law caps the renewal fee at $75 for Limited, $100 for Intermediate and $125 for Unlimited. Renewing late costs $10 a month.

Renewal cycle

Every year, by December 31

CE hours

8

Renewal fee

Up to $75–$125, depending on level

Late penalty

$10 per month

Licensed in another state?

North Carolina has agreements with nine states. Licensed in one of them? The board’s exam waiver form lets you skip the trade exam.

Alabama: trade exam waived

File NCLBGC’s exam waiver form. All of North Carolina’s other license requirements still apply.

Arkansas: trade exam waived

File NCLBGC’s exam waiver form. All of North Carolina’s other license requirements still apply.

Florida: trade exam waived

File NCLBGC’s exam waiver form. All of North Carolina’s other license requirements still apply.

Georgia: trade exam waived

File NCLBGC’s exam waiver form. All of North Carolina’s other license requirements still apply.

Louisiana: trade exam waived

File NCLBGC’s exam waiver form. All of North Carolina’s other license requirements still apply.

Mississippi: trade exam waived

File NCLBGC’s exam waiver form. All of North Carolina’s other license requirements still apply.

South Carolina: trade exam waived

File NCLBGC’s exam waiver form. All of North Carolina’s other license requirements still apply.

Tennessee: trade exam waived

File NCLBGC’s exam waiver form. All of North Carolina’s other license requirements still apply.

Virginia: trade exam waived

File NCLBGC’s exam waiver form. All of North Carolina’s other license requirements still apply.

City and county rules in North Carolina

The state issues your residential license. Permits and inspections on each job come from the local building department.

The state covers

  • Residential and Building licenses and their levels
  • Financial requirements
  • Approving exam candidates (testing through PSI)
  • Continuing education needed to renew

Cities and counties cover

  • Building permits
  • Inspections
  • Local business registration

Who oversees residential contractors in North Carolina

Licensing authority

North Carolina Licensing Board for General Contractors

919-571-4183

nclbgc.org/license-applicants

What the board does

  • Licenses residential and building contractors at three levels
  • Checks applications and approves who can take the exam
  • Decides the financial requirements for each level
  • Requires 8 hours of continuing education for renewal

North Carolina residential contractor license: common questions

What’s the difference between a Residential and a Building contractor license in NC?

A Residential license covers homes, along with their site work, driveways, sidewalks, and water and wastewater systems. A Building license also includes commercial work.

What are the project limits for each North Carolina residential license level?

Each project can be worth up to $750,000 with Limited and up to $1,500,000 with Intermediate. Unlimited has no cap.

What are the financial requirements for a North Carolina Limited residential license?

You need one of these: $17,000 in working capital, $80,000 in net worth, or a $350,000 surety bond.

How many questions are on the NC residential contractor exam?

There are 90 questions, and you get 210 minutes. Answer 63 correctly to pass.

Is the NC residential contractor exam open book?

Partly. You can bring some references in, tabbed and highlighted. Others are only for studying ahead of time.

Does a North Carolina residential contractor license require continuing education?

Yes. You need 8 hours of CE to renew.

Does North Carolina accept residential contractor licenses from other states?

If you’re licensed in Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, South Carolina, Tennessee or Virginia, you can use the exam waiver form to skip the trade exam.

Where this information comes from

  1. North Carolina Licensing Board for General Contractors, License applicants
  2. PSI, North Carolina contractor exam scheduling
  3. 15A NCAC Chapter 4, Sedimentation Control (PDF)
  4. N.C. General Statutes Chapter 113A, Article 4
  5. NCLBGC Laws and Regulations Book, 21 NCAC 12A .0304 Fees and G.S. 87-10 (PDF)
  6. PSI, North Carolina General Contractors Candidate Information Bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the North Carolina Licensing Board for General Contractors.