Virginia Low Voltage License: Requirements, Exam and How to Apply, Virginia Low Voltage License, Virginia, Electronic/Communication Service, Fire Alarm Systems, Class A Contractor, Class B Contractor, Class C Contractor, Virginia Board for Contractors (DPOR), how to get a Virginia Low Voltage License, Virginia Low Voltage License requirements, Virginia Low Voltage License exam, Virginia licensing board, Virginia contractor license, license application steps, exam reference books, Depends on your class, General & Advanced, Virginia & General, Base license

Home Licenses Low Voltage License Virginia

Low Voltage License · ESC & Fire Alarm (FAS)

Virginia Low Voltage License: Requirements, Exam and How to Apply

There’s no separate low voltage license in Virginia. Instead, you put a specialty on a Class A, B or C contractor license: Electronic/Communication Service (ESC) or Fire Alarm Systems (FAS). This guide covers both.

Last updated October 27, 2026 from Virginia Board for Contractors requirements

Exam time

2 hrs

For the ESC or FAS specialty exam; Class A and B exams come on top

Time to get license

Varies

We couldn’t confirm the experience rules

Continuing ed

Not required

Contractor licenses carry no CE (trade licenses have their own rules)

Do you need a Virginia low voltage license?

Yes. Low voltage work in Virginia falls under a contractor license that carries a specialty designation. ESC is for communications and data systems at 50 volts or less. FAS is for fire alarm systems at 50 volts or less. Either one is added to a Class A, B or C license.

You need the license when

  • Your work involves installing, repairing, improving or removing phone wiring, computer cabling, data and network systems, sound systems, TV and cable wiring, antennas or fiber optics at 50 volts or less (ESC)
  • Your work involves installing, repairing or improving fire alarm systems running at 50 volts or less (FAS)
  • You take on this work as a business, so you need a Class A, B or C contractor license

Exceptions

  • A firm with the electrical (ELE) classification can handle fire alarm work without the FAS specialty
  • Anything above 50 volts is outside ESC and FAS and calls for a different classification

What happens if you work unlicensed

We couldn’t confirm specific penalty amounts. The Virginia Board for Contractors issues and oversees these licenses and has the power to discipline, so get your license before you bid a job or start work.

How to get a Virginia low voltage license in 6 steps

  1. Choose your specialty and class First step
    Go with ESC if you do communications and data work, or FAS if you do fire alarms. Then figure out whether your base license should be Class A, B or C.
  2. Complete the 8-hour pre-licensing course Before applying
    All contractor applicants in Virginia finish a state-approved 8-hour pre-licensing course on business, safety and project topics.
  3. Get pre-approved for the exam Before scheduling
    You can’t schedule until the testing agency pre-approves you. Reach PSI at 855-340-3910 or candidate.psiexams.com.
  4. Pass the specialty exam Exam day
    Take the ESC or FAS exam at a PSI test center. It’s open book, with 50 questions and 120 minutes.
  5. Pass any class exams Exam day
    Going for Class A? Add the Virginia, General and Advanced exams. Class B means the Virginia and General exams. Class C doesn’t add any exam.
  6. Submit your application to DPOR Once your exams are done
    Send your contractor license application, with the specialty designation, to the Department of Professional and Occupational Regulation. Questions go to 804-367-8511.

Virginia low voltage application checklist

Virginia’s application on one page

  • ESC or FAS specialty picked
  • Class A, B or C base license chosen
  • 8-hour state-approved pre-licensing course done
  • Pre-approval from PSI for the exam
  • Passing score on the specialty exam
  • Class A or B exam scores, when required

Virginia low voltage license classes

You’ll need a base contractor license (Class A, B or C) plus the low voltage specialty that fits your work. Your class sets which general exams you sit, and the specialty brings its own exam.

ESC Data and communications

Electronic/Communication Service

Covers data and network links, computer cabling, phone lines, sound, TV and cable wiring, antennas and fiber optics, as long as it’s 50 volts or less.

ExamESC exam (50 questions)
LimitDepends on your class

FAS Life safety

Fire Alarm Systems

Fire alarm installation, repair and improvement at 50 volts or less. The firm also has to meet tradesman licensing standards.

ExamFAS exam (50 questions)
LimitDepends on your class

Class A Base license

Class A Contractor

The base license your specialty goes on. You pass three general exams.

ExamVirginia, General & Advanced
LimitNot stated

Class B Base license

Class B Contractor

The base license your specialty goes on. You pass two general exams.

ExamVirginia & General
LimitNot stated

Class C Fewest exams

Class C Contractor

The base license your specialty goes on. No general exam; you only take the 8-hour pre-licensing course.

ExamOnly the specialty exam
LimitNot stated

Requirements for each Virginia low voltage class

The path is the same for both specialties. What differs is the scope of work and the passing score on the exam.

RequirementESC (communications)FAS (fire alarm)
Pre-licensing course8 hours, approved by the state8 hours, approved by the state
Base licenseClass A, B or CClass A, B or C
Specialty exam50 questions; pass with 33 correct50 questions; pass with 70%
Time limit120 minutes, open book120 minutes, open book
Added exams by classA: 3 exams · B: 2 exams · C: noneA: 3 exams · B: 2 exams · C: none
Exam pre-approvalRequiredRequired
ExperienceNot statedRequired; how much isn’t stated

The Virginia low voltage exam

PSI gives a separate open-book exam for each specialty, with 50 questions. Passing it isn’t the whole job: you still have to meet the Class A, B or C requirements.

Format

120 min, open book

Questions

50

Passing score

ESC: 33 correct · FAS: 70%

Exam vendor

PSI

Scoring and content

  • On the ESC exam: low voltage systems under 50 volts, grounding and bonding, conductors and cables, power conditioning, TV, computer and data, phone systems, raceways and test equipment
  • On the FAS exam: detectors, alarm notification, wiring, grounding, power supply, general electrical knowledge and general regulations
  • You can tab and highlight your references; ESC uses the NEC, and FAS uses the NEC plus NFPA 72
  • As new editions come out, you can bring any edition of the references and code books

Retakes

  • We couldn’t confirm the retake rules
  • Every attempt needs pre-approval before you schedule it
  • The $85 PSI exam fee is good for one year; call PSI at 855-340-3910 to ask about retake timing
  • You’ll find test centers in the bigger cities around Virginia

Books and codes for this exam (open book)

Virginia’s low voltage specialty exams are open book: the approved references can be tabbed, highlighted and used during the test, but online course material can’t. The list covers the Electronic/Communication Service and Fire Alarm Systems exams, plus the Class A/B contractor exam.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC) — Electronic/Communication Service and Fire Alarm Systems exams2017Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code — Fire Alarm Systems exam2013Allowed in exam
American Electricians’ Handbook — Electronic/Communication Service exam17th editionAllowed in exam
Telecommunications Wiring — Electronic/Communication Service exam3rd editionAllowed in exam
Live Sound Reinforcement — Electronic/Communication Service examNot statedAllowed in exam
Data, Voice and Video Cabling — Electronic/Communication Service exam3rd editionAllowed in exam
Antenna Toolkit — Electronic/Communication Service exam2nd editionAllowed in exam
Virginia Construction Code (Virginia Uniform Statewide Building Code), Chapter 1 — Class A/B exam2018Allowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management — Class A/B examNot statedAllowed in exam

Live Sound Reinforcement is hard to find in print, and the Antenna Toolkit is a free printout.

Prep for the Virginia low voltage exam

Our exam prep course, Total Prep and complete bundle for the Virginia low voltage exam. Prices are coming soon.

Books for this exam

Renewing your Virginia low voltage license

Contractor licenses in Virginia have no continuing education requirement, but trade licenses set their own CE rules. You renew every 2 years and pay $220 (Class C), $260 (Class B) or $270 (Class A), along with a $30 Recovery Fund assessment. If you miss the deadline, you pay a reinstatement fee of $460 for Class C or $550 for Class A or B instead.

Renewal cycle

Every 2 years

CE hours

None for the contractor license

Renewal fee

$220–$270 plus $30 Recovery Fund

Late penalty

$460–$550 to reinstate

Licensed in another state?

Virginia has no reciprocity agreements for these licenses, so a license from another state won’t carry over.

No reciprocity

You apply like anyone new: finish the 8-hour course, pass the specialty exam and meet the requirements for your Class A, B or C license.

City and county rules in Virginia

The state issues your contractor license and specialty. Permits and inspections for each job are up to the city or county.

The state handles

  • Class A, B and C contractor licenses
  • ESC and FAS specialties
  • Approving pre-licensing courses
  • Exams (through PSI)

Cities and counties handle

  • Building and electrical permits
  • Inspections on the job site
  • Local business licensing

Who oversees low voltage contractors in Virginia

Licensing authority

Virginia Board for Contractors (DPOR)

804-367-8511

dpor.virginia.gov/Boards/Contractors

What the board does

  • Grants Class A, B and C contractor licenses and specialty designations
  • Decides which exams each class has to pass
  • Makes applicants take the state-approved 8-hour pre-licensing course
  • Oversees licensees and handles discipline

Virginia low voltage license: common questions

Is there a low voltage license in Virginia?

No, it isn’t a license by itself. It’s a specialty, either Electronic/Communication Service (ESC) or Fire Alarm Systems (FAS), that goes on your Class A, B or C contractor license.

What counts as low voltage for a Virginia license?

The ESC and FAS specialties both apply to systems running at 50 volts or less.

Are the Virginia ESC and FAS license exams open book?

Yes. Each one is open book, with 50 questions and 120 minutes. You need 33 correct to pass ESC and 70% to pass FAS.

Do I also need a Class A, B or C license in Virginia?

Yes, the specialty exam by itself won’t do it. Class A means three more exams, Class B means two, and Class C has none beyond the 8-hour course.

Do I have to take the 8-hour pre-licensing course for a Virginia license?

Yes. All Virginia contractor applicants have to finish a state-approved 8-hour pre-licensing course.

Can I transfer my out-of-state low voltage license to Virginia?

No. Virginia has no reciprocity agreements for these licenses, so you go through the process as a new applicant.

Do Virginia low voltage contractors need continuing education?

Not for the contractor license. Virginia trade licenses do carry their own CE requirements.

Where this information comes from

  1. Virginia DPOR, Board for Contractors
  2. PSI, candidate exam scheduling
  3. Virginia DHCD, 2018 Virginia Construction Code (PDF)
  4. NFPA 70, National Electrical Code
  5. NFPA 72, National Fire Alarm and Signaling Code
  6. DPOR, Contractor License Application (PDF)
  7. Virginia Administrative Code, 18VAC50-22-100 Fees
  8. Virginia Administrative Code, 18VAC50-22-140 Renewal fees
  9. Virginia Administrative Code, 18VAC50-22-170 Reinstatement fees
  10. Virginia Administrative Code, 18VAC50-22-110 Renewal required
  11. PSI, Virginia Contractor Specialty Examination Candidate Information Bulletin (PDF)
  12. PSI, Virginia Contractor Examination Candidate Information Bulletin (PDF)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Virginia Board for Contractors.