Maine Low Voltage License: Requirements, Exam and How to Apply, Maine Low Voltage License, Maine, Limited Electrician Low Energy, Content and scoring, Maine Electricians’ Examining Board, how to get a Maine Low Voltage License, Maine Low Voltage License requirements, Maine Low Voltage License exam, Maine licensing board, Maine contractor license, license application steps, exam reference books, Coursework, Electricity I, Electricity II, Electronics I, Blueprint Reading and Controls I, Code coursework, Work experience, Experience in low energy

Home Licenses Low Voltage License Maine

Low Energy Electrician · Limited License

Maine Low Voltage License: Requirements, Exam and How to Apply

In Maine, low voltage work falls under the Limited Electrician Low Energy license. You’ll find the Maine Electricians’ Examining Board’s rules on courses, experience, the exam and renewing.

Last updated October 27, 2026 from Maine Electricians’ Examining Board requirements

Exam time

3 hrs

50 open-book questions

Time to get license

4,000 hrs

Work experience along with six required courses

Continuing ed

15 hrs

A 15-hour NEC course each code cycle

Do you need a Maine low voltage license?

You do if you install, alter, maintain or test low energy systems in Maine. The Limited Electrician Low Energy license applies to data, computer, radio and telephone wiring and to fire alarm circuits and equipment, as long as the system is 98 volts or less.

You need the license when

  • You test, alter, maintain or install fire alarm circuits and equipment
  • Your work involves data, computer, radio or telephone wiring
  • You put in related conduit, raceways, apparatus, thermostats, appliances or fixtures
  • The system operates at 98 volts or less

Exceptions

  • Anything above 98 volts falls outside this license, so you’d need another electrician license
  • We couldn’t confirm any other exemptions, so ask the Board before you work without a license

What happens if you work without a license

Electrical work without the correct Maine license violates state licensing law. The Board can look into complaints and discipline those involved, so confirm your license covers a job before you begin.

How to get a Maine low voltage license in 6 steps

  1. Complete your courses Ahead of applying
    Take a course on the current National Electrical Code, along with Electricity I, Electricity II, Electronics I, Blueprint Reading and Controls I, which run 45 hours each. Hold on to your transcripts.
  2. Build your hours Ahead of applying
    Use affidavits to show 4,000 hours of work experience, including 2,000 or more on low energy installations.
  3. Get approved for the exam Ahead of the exam
    Send your exam application to the Maine Electricians’ Examining Board. Online applications are accepted, and you must be approved before testing.
  4. Book with Prov Once you’re approved
    You’ll get scheduling details from the Board. Reserve your exam through Prov’s scheduler.
  5. Pass your exam Test day
    You get 3 hours for 50 questions and can use the NEC. A score of 70% passes.
  6. Submit your license application Once you pass
    With the exam behind you, ask the Electricians’ Examining Board to issue your Limited Electrician Low Energy license.

Maine low voltage application checklist

Everything for your Maine application on one page

  • Transcripts showing all five 45-hour courses
  • Proof you took a course on the current National Electrical Code
  • Affidavits covering 4,000 hours, with 2,000 in low energy
  • Exam application filled out, signed and dated
  • Board approval, followed by a Prov exam passed with 70%+

The Maine low voltage license

Maine sorts limited electrician licenses into classifications. Low voltage work calls for the Low Energy license.

LE Low voltage work

Limited Electrician Low Energy

Covers installing, altering, maintaining and testing data, computer, radio and telephone wiring and fire alarm circuits and equipment, at 98 volts or less.

ExamThe Low Energy exam
Limit98 volts max

Maine low voltage license requirements

Before you can take the exam, you need an approved exam application, documented hours and finished coursework.

RequirementLimited Electrician Low Energy
CourseworkElectricity I, Electricity II, Electronics I, Blueprint Reading and Controls I, each a 45-hour course
Code courseworkA course on the current National Electrical Code
Work experience4,000 hours, documented by affidavit
Experience in low energy2,000 or more of those hours on low energy installations
ApplicationExam application filled out, signed and dated
ExamScore 70% or better

The Maine low voltage exam

There’s just one open-book Low Energy exam. Bring the National Electrical Code with whatever markings you want, provided nothing is inserted into it or attached to it.

Format

Open book

Questions

50

Passing score

70%

Exam vendor

Prov

Content and scoring

  • 3 hours for 50 questions; 70% passes
  • Covers supervisory stations, systems testing, signaling circuits and notification appliances, initiating devices, installation requirements and general electrical knowledge
  • You can underline, highlight, write in or tab the NEC
  • You can’t insert, glue, tape or staple anything into the book

Retakes and scheduling

  • We couldn’t confirm the retake rules
  • You need Board approval before booking
  • You book exams with Prov
  • Check with the Board on waiting periods and retake fees

Books and codes for this exam (open book)

The Maine Limited Electrician Low Energy exam is open book, and you can bring the National Electrical Code. The book can be tabbed, written in, highlighted or underlined, but nothing can be stapled, taped, glued or otherwise inserted into it.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2023Allowed in exam

Prep for the Maine low voltage exam

Our exam prep course, Total Prep and complete bundle for the Maine low voltage exam. Prices are coming soon.

Books for this exam

Renewing your Maine low voltage license

You renew a Maine Low Energy license every two years for $150. Your continuing education is a 15-hour course on the National Electrical Code, timed to the code’s update cycle. If you’re up to 90 days late, there’s an extra $50 late fee.

Renewal cycle

Every 2 years

CE hours

15

Renewal fee

$150

Late penalty

$50 (if you’re up to 90 days late)

Licensed in another state?

We couldn’t confirm any reciprocity agreements for the Low Energy license. For reciprocity questions, call Maine’s Office of Professional and Financial Regulation at (207) 624-8500.

No reciprocity in place

We couldn’t confirm any for this license. Expect to apply as a new candidate, and call (207) 624-8500 to find out if your license from another state counts.

City and county rules in Maine

The state grants your Low Energy license, and it’s good anywhere in Maine. Where permits and inspections apply, local officials still handle them.

What the state covers

  • Licensing Limited Electrician Low Energy holders
  • Approving exam candidates and sending scheduling details
  • Rules for continuing education (15 hrs per NEC code cycle)
  • Disciplining license holders

What your city and county cover

  • Permits and inspections, where needed
  • Enforcing local codes

The board that oversees Maine low energy electricians

Licensing authority

Maine Electricians’ Examining Board

Office of Professional and Financial Regulation

(207) 624-8603

maine.gov/pfr/professionallicensing/professions/electricians

What the board does

  • Grants and renews limited electrician licenses
  • Decides who can take the exam
  • Sets the continuing education rules
  • Disciplines license holders

Maine low voltage license: common questions

What is a Maine low energy electrician license?

It’s the Limited Electrician Low Energy license, which applies to data, computer, radio and telephone wiring and to fire alarm circuits and equipment, at 98 volts or less.

How many hours of experience does a Maine low energy license take?

You need 4,000 hours of work experience documented by affidavit, and 2,000 or more of them must be on low energy installations.

What courses do I need for a Maine low energy license?

A course on the current National Electrical Code, plus Electricity I, Electricity II, Electronics I, Blueprint Reading and Controls I, at 45 hours each.

Can I use books on the Maine low energy exam?

Yes. The NEC is allowed with tabs, highlights or notes, but you can’t insert, glue, tape or staple anything into it. There are 50 questions, and 70% passes.

Who runs the Maine low energy license exam?

Prov gives it. When the Board approves your application, you book the exam on Prov’s site.

How much CE does a Maine low energy license need for renewal?

You take a 15-hour National Electrical Code update course each code cycle and certify it at your 2-year renewal.

Does Maine offer reciprocity for a low energy electrician license?

We couldn’t confirm any agreements. Ask the Office of Professional and Financial Regulation by calling (207) 624-8500.

Where this information comes from

  1. Maine Electricians’ Examining Board, Applications and forms
  2. Prov, Exam scheduler
  3. Maine Electricians’ Examining Board, Limited Electrician fees
  4. Prov, State of Maine OPOR Candidate Information Bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Maine Electricians’ Examining Board.