Kansas HVAC License: Requirements, Exam and How to Apply, Kansas HVAC License, Kansas, Journeyman Mechanical, Master Mechanical, Mechanical Contractor, Johnson County, Sedgwick County, Shawnee County / Topeka, Douglas County / Lawrence, City and county licensing offices, how to get a Kansas HVAC License, Kansas HVAC License requirements, Kansas HVAC License exam, Kansas licensing board, Kansas contractor license, license application steps, exam reference books, ICC KGG Journeyman Mechanical, Works for a contractor, ICC KGL Master Mechanical, Not required

Home Licenses HVAC License Kansas

HVAC License · Journeyman & Master

Kansas HVAC License: Requirements, Exam and How to Apply

There’s no statewide mechanical license in Kansas. Here’s what the bigger counties require instead, from experience and the ICC Kansas Standard exams to insurance and renewal.

Last updated October 27, 2026 from Johnson, Sedgwick, Shawnee and Douglas County licensing office requirements

Exam time

3–4 hrs

Journeyman (KGG) is 3 hrs; Master (KGL) is 4 hrs

Time to get license

~2–4 yrs

Journeyman takes 2 yrs; Master takes about 4

Continuing ed

Varies

Required in most counties; the hours differ

Do you need a Kansas HVAC license?

Yes, though the state doesn’t issue it. Cities and counties handle mechanical licensing in Kansas, so your Journeyman or Master Mechanical license comes from the jurisdiction you work in. What follows is based on Johnson, Sedgwick, Shawnee and Douglas counties.

You need the license when

  • You’re a journeyman doing mechanical (HVAC) work as an employee of a mechanical contractor
  • You’re a master who designs or installs mechanical systems and supervises other workers
  • You operate a mechanical contracting firm where the county licenses contractors (Johnson County’s Class DM license, for example)
  • You plan to pull permits, or work in a city or county that runs its own trade licensing

Exceptions

  • Each jurisdiction has its own rules, and one county may not accept another county’s license
  • Some places have reciprocity with nearby counties, so find out before you retest

What happens if you work unlicensed

We couldn’t confirm specific fines. Your local licensing office can deny permits, halt work and act against anyone doing mechanical work without the license the jurisdiction requires. Check with your city or county before you begin.

How to get a Kansas HVAC license in 6 steps

  1. Find your licensing office First step
    In Kansas, cities and counties license mechanical work. Find out which jurisdiction covers your jobs and what it asks for.
  2. Get field experience 2–4 years
    For Journeyman, plan on 2 years of field experience. For Master, you need 4 years in the field or 2 years as a journeyman.
  3. Pass your ICC exam through Pearson VUE Test day
    Schedule the KGG Journeyman or KGL Master Mechanical exam with Pearson VUE, or call 877-234-6082. Each one is $115, and a 75% passes.
  4. Get insured Before applying
    Lots of counties, Johnson and Shawnee among them, expect certificates for general liability and workers’ comp to come with your application.
  5. Apply with your city or county
    File your county’s application along with exam results, proof of experience and insurance, then pay the application and license fees. In Johnson County, that’s $100 to apply and $225 per license. In Sedgwick County, a 2-year mechanical license costs $360.
  6. Renew when your county says Ongoing
    To renew, most counties ask for continuing education. Since the hours and topics differ, check with your licensing office.

Kansas HVAC application checklist

Everything for the Kansas application on one page

  • Know which city or county licenses your work
  • Proof of 2–4 years in the field
  • A 75% or better on the ICC KGG or KGL exam
  • Certificates for general liability and workers’ comp
  • Your trade school transcript, if it counts toward experience
  • Your local application and fees

Kansas HVAC license classes

For mechanical licenses, most Kansas counties use one shared pair of ICC Kansas Standard exams. On top of that, Johnson County issues licenses to mechanical contracting firms.

KGG Start here

Journeyman Mechanical

Passes the journeyman exam and then does mechanical work as an employee of a mechanical contractor.

ExamICC KGG Journeyman Mechanical
LimitWorks for a contractor

KGL Most common target

Master Mechanical

Designs and installs mechanical systems for a mechanical contractor and can supervise other workers.

ExamICC KGL Master Mechanical
LimitNot stated

DM Johnson County

Mechanical Contractor

A license for the firm itself in Johnson County. Requires insurance, trade experience, and either a qualifying degree or the general building exam.

ExamICC Kansas Standard General Building Contractor (A)
LimitNot stated

Requirements for each Kansas HVAC class

The requirements below are common in the counties we checked. Yours could be different, so check with your city or county licensing office.

RequirementJourneyman (KGG)Master (KGL)Johnson County Class DM
Work experience2 years in the field, or (in Sedgwick) 1 year plus 1 year of mechanical trade school4 years in the field, or 2 years working as a journeyman4 years in the field, or 2 years working as a certified journeyman
ExamICC KGG Journeyman MechanicalICC KGL Master MechanicalICC General Building Contractor (A) exam, or a qualifying degree
Score to pass75%75%75%
License you must already holdNot requiredMechanical Journeyman (in Sedgwick)Not stated
InsuranceDepends on the countyGeneral liability and workers’ comp (in Shawnee)General liability and workers’ comp
Other paperworkExam results, proof of experience, and a trade school transcript if you’re using oneExam results and proof of experienceFor a corporate entity, proof the firm is in good standing

The Kansas HVAC exam

Pearson VUE gives the ICC Kansas Standard Mechanical exams that Kansas counties use. You can bring tabbed and highlighted references to either one, since both are open book.

Format

Open book, on computer

Questions

50 (KGG) or 100 (KGL)

Passing score

75%

Exam vendor

Pearson VUE (ICC)

Scoring and topics

  • KGG Journeyman: 3 hours for 50 questions
  • KGL Master: 4 hours for 100 questions
  • Master exam covers fuel supply, chimneys and vents, combustion air, ducts, exhaust and ventilation, appliances and equipment, and administration
  • Books include the 2018 International Fuel Gas Code and the 2018 International Mechanical Code
  • You can tab and highlight your references

If you need to retake

  • We couldn’t confirm the retake rules
  • Book through Pearson VUE at 877-234-6082
  • You’ll find test centers in the bigger Kansas cities
  • Check with your county on how long an exam score stays valid

Books and codes for this exam (open book)

The ICC Kansas Standard Journeyman (KGG) and Master (KGL) Mechanical exams are open book. You can tab and highlight the approved references below and use them during the test.

ReferenceEditionHow it’s used
International Mechanical Code (IMC)2018Allowed in exam
International Fuel Gas Code (IFGC)2018Allowed in exam
NFPA 70: National Electrical Code (NEC)2017Allowed in exam

Prep for the Kansas HVAC exam

Our exam prep course, Total Prep and complete bundle for the Kansas HVAC exam. Prices are coming soon.

Books for this exam

Renewing your Kansas HVAC license

Your city or county handles renewal. Most ask for continuing education, but hours, topics and fees differ, so ask your local licensing office.

Renewal cycle

Varies by county

CE hours

Varies by county

Renewal fee

$225 (Johnson County)

Late penalty

$75 (Johnson County)

Kansas HVAC CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Lots of Kansas counties honor each other’s licenses, though there’s no statewide license you could transfer. Ask your city or county which jurisdictions it recognizes.

Kansas counties: reciprocity depends on where you are

Plenty of counties have reciprocity agreements with one another. Your local licensing office can tell you where your license is honored.

Other states: no statewide agreement

You can’t transfer a state mechanical license, because Kansas doesn’t have one. Apply with your city or county as a new applicant.

City and county rules in Kansas

Almost all mechanical licensing in Kansas happens at the local level. Here’s how four of the bigger counties do it.

What the state handles

  • There’s no statewide Journeyman or Master Mechanical license
  • Registering corporate entities as businesses

What cities and counties handle

  • Journeyman and Master Mechanical licenses
  • Contractor licenses (for example, Johnson County’s Class DM)
  • Fees and insurance rules
  • Renewal and continuing education
  • Reciprocity with other counties

Johnson County

Class DM Mechanical Contractor

  • Application, plus the application and license fees
  • Proof of general liability and workers’ comp coverage
  • 2 years of journeyman certification, or 4 years of experience in the field
  • Either 75% on the ICC General Building Contractor (A) exam or a construction-related degree from an ABET or ACCE accredited program
  • Full requirements are on the county site: see the Class DM page

Sedgwick County

Master & journeyman trade certificates

  • Trade Certificate Application with exam results and proof of field experience
  • Journeyman: 75% on KGG plus 2 years in the field (or 1 year plus 1 year of trade school)
  • Master: an active journeyman license, 75% on KGL, and either 2 years as a journeyman or 4 years in the field
  • Full requirements are on the county site: see MABCD’s certificate page

Shawnee County / Topeka

Trade contractor licensing

  • Application for a trade license
  • Insurance certificates for general liability and workers’ comp
  • Form acknowledging the certificate of insurance
  • KGG for Journeyman and KGL for Master
  • Full requirements are on the city site: see Topeka’s trade page

Douglas County / Lawrence

Contractor licensing

  • Master: 75% on KGL, plus 4 years in the field or 2 years as a journeyman
  • Journeyman: 75% on KGG and 2 years of field experience
  • Full requirements are on the city site: see Lawrence’s licensing page

Who licenses HVAC mechanics in Kansas

Licensing authority

City and county licensing offices

No statewide board. Apply to the city or county where you work.

Exams: Pearson VUE, 877-234-6082

home.pearsonvue.com/icc/license

What the board does

  • Grant and renew Journeyman and Master Mechanical licenses
  • Decide experience, insurance and fee rules
  • Set CE requirements for renewal
  • Choose which other counties’ licenses to honor

Kansas HVAC license: common questions

Is there a statewide HVAC license in Kansas?

No. The state doesn’t license mechanical journeymen or masters; your city, county or jurisdiction does.

What exam do I need for a Kansas HVAC license?

Most counties rely on the ICC Kansas Standard exams, which you book through Pearson VUE: KGG for Journeyman and KGL for Master.

How much experience does a Kansas HVAC license require?

Journeyman usually takes 2 years of field experience. For Master, you need 4 years in the field or 2 years as a journeyman.

Is the Kansas HVAC license exam open book?

Yes, and a 75% passes. Approved references such as the 2018 International Mechanical Code and International Fuel Gas Code can be tabbed and highlighted.

Is my Kansas HVAC license valid in other counties?

Possibly. Plenty of counties have reciprocity agreements with one another, so check with your local licensing office about which ones it honors.

Do Kansas HVAC techs need CE to renew?

Most counties say yes, though the hours and topics differ. Ask your local licensing authority.

Where this information comes from

  1. Johnson County, Class DM Mechanical Contractor License
  2. Sedgwick County MABCD, Master & Journeyman Trade Certificates
  3. City of Topeka, Trade Contractors Info
  4. City of Lawrence, Contractor Licensing
  5. Pearson VUE, ICC licensing exams
  6. ICC, State of Kansas Contractor/Trades Examination Bulletin
  7. Johnson County, New License & License Types (licensing fees)
  8. Sedgwick County MABCD, License Fees Table A

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with any Kansas city or county licensing office.