Wisconsin Code Official License: Requirements, Exam and How to Apply, Wisconsin Code Official License, Wisconsin, UDC Construction Inspector, UDC Electrical Inspector, UDC HVAC Inspector, UDC Plumbing Inspector, Commercial Building Inspector, Commercial Electrical Inspector, Commercial Plumbing Inspector, Retake policy, Wisconsin Department of Safety and Professional Services, how to get a Wisconsin Code Official License, Wisconsin Code Official License requirements, Wisconsin Code Official License exam, Wisconsin licensing board, exam reference books

Home Licenses Code Official License Wisconsin

Code Official License · UDC & Commercial Inspectors

Wisconsin Code Official License: Requirements, Exam and How to Apply

The Department of Safety and Professional Services (DSPS) certifies Wisconsin’s building, electrical, HVAC and plumbing inspectors. Here you’ll find all seven inspector certifications, their exams, the credentials that let you bypass an exam, and what it takes to keep your certification.

Last updated October 28, 2026 from Wisconsin Department of Safety and Professional Services requirements

Exam time

3–4 hrs

UDC exams run 3 hrs; commercial building and electrical run 4 hrs

Time to get license

Varies

The exam route for commercial electrical calls for 3–6 yrs of experience

Continuing ed

24 hrs

Every 4-year renewal

Do you need a Wisconsin code official license?

It is if you inspect buildings to enforce state codes in Wisconsin. The state calls it a certification, and DSPS (the Department of Safety and Professional Services) issues it. Certifications come in two groups: UDC for one- and two-family dwellings, and commercial for public buildings and places of employment.

You need the license when

  • You enforce the Uniform Dwelling Code by inspecting one- and two-family dwellings while they’re built (UDC Construction, Electrical, HVAC or Plumbing Inspector)
  • You enforce the Commercial Building Code by inspecting public buildings and places of employment (Commercial Building Inspector)
  • In public buildings and places of employment, you enforce the Commercial Electrical Code (Commercial Electrical Inspector)
  • In public buildings and places of employment, you enforce the Commercial Plumbing Code (Commercial Plumbing Inspector)

Exceptions

  • An accepted credential, like some ICC certifications or a Wisconsin Master Electrician license, lets you bypass the state exam, but you still need the certification
  • Already certified as a Wisconsin Commercial Building Inspector? That current certification also gets you UDC Construction Inspector and UDC HVAC Inspector, and you won’t sit for another exam
  • Plumbers with a Wisconsin Master or Journeyman Plumber license can become a Commercial Plumbing Inspector without testing

Inspecting without certification

We couldn’t confirm specific penalties. Because DSPS issues and renews these certifications, inspecting without a current one can put both your job and your inspections in jeopardy. Talk to DSPS before you do any inspection.

How to get a Wisconsin code official license in 6 steps

  1. Choose your certification Before you start
    Choose between homes with one or two families (UDC) and public buildings or places of employment (commercial), then pick a trade.
  2. See if you can skip the exam Before you apply
    Already have an accepted credential, such as an ICC certification, a Wisconsin Master Electrician license or a Master or Journeyman Plumber license? Upload it and skip the test.
  3. Apply in the LicensE portal Before the exam
    Use the DSPS LicensE portal to send in your application and fees. Attach copies of your current licenses and certifications, plus transcripts if you’re using an electrical experience route.
  4. Get cleared to test After you apply
    After reviewing your application, DSPS confirms that you can schedule the exam.
  5. Pass the state exam Exam day
    All exams are open book, and 70% passes. You can test in Pewaukee, Appleton, Weston, DeForest or Eau Claire. If you’re going for Commercial Plumbing, you have to pass both parts.
  6. Get your certification By mail
    When everything’s done, DSPS sends your certification by mail.

Wisconsin code official application checklist

Your one-page Wisconsin checklist

  • Picked a UDC or commercial certification
  • Set up a LicensE portal account and sent your application
  • Copies of your current licenses or ICC certifications, if you’re bypassing the exam
  • Transcripts, if schooling or a degree counts toward your electrical experience
  • Cleared for the exam by DSPS
  • Code books plus a three-hole punched binder for the open-book exam

Wisconsin code official license classes

There are seven Wisconsin inspector certifications: four UDC ones for one- and two-family homes and three commercial ones. Every one has a state exam, and most let you swap in a license or certification you might already have.

UDC-C Most common

UDC Construction Inspector

Administers and enforces the Uniform Dwelling Code by inspecting one- and two-family dwellings while they’re being built.

Exam115 questions, 3 hrs
Limit1- & 2-family homes

UDC-E Electrical

UDC Electrical Inspector

Enforces the Electrical Standards Code by inspecting one- and two-family dwellings.

Exam90 questions, 3 hrs
Limit1- & 2-family homes

UDC-H HVAC

UDC HVAC Inspector

Checks heating, ventilating and air conditioning work in one- and two-family dwellings.

ExamState exam, pass at 70%
Limit1- & 2-family homes

UDC-P Exam only

UDC Plumbing Inspector

Enforces plumbing codes by inspecting one- and two-family dwellings. You can only qualify by passing the state exam.

ExamState exam, pass at 70%
Limit1- & 2-family homes

CBI ICC accepted

Commercial Building Inspector

Enforces the Commercial Building Code by inspecting public buildings and places of employment.

Exam4 hrs, or an ICC certification
LimitCommercial buildings

CEI Experience required

Commercial Electrical Inspector

Enforces the Commercial Electrical Code in places of employment and public buildings.

Exam4 hrs, or an ICC certification
LimitCommercial buildings

CPI Two-part exam

Commercial Plumbing Inspector

Enforces the Commercial Plumbing Code in places of employment and public buildings.

Exam2 parts, 3 hrs each
LimitCommercial buildings

Requirements for each Wisconsin code official class

You can qualify for any class in one of two ways: pass the state exam, or show DSPS a current credential it accepts. The only exam route with an experience requirement is Commercial Electrical Inspector.

RequirementUDC classesCommercial BuildingCommercial ElectricalCommercial Plumbing
ExperienceNot statedNot statedExam route: 6 yrs at 1,000 hrs/yr. That drops to 3 yrs for holders of an electrical engineering degree or a PE, architect or electrical designer credentialNot stated
State examOpen book, 70%; Construction and Electrical are 3 hrsOpen book, 70%, 4 hrsOpen book, 70%, 4 hrsOpen book in two parts, 70%, 3 hrs per part
A credential in place of the examDepends on the class (UDC Plumbing has none)ICC C5, B5, C3, B2 + M2 or B3 + M3, or registration as a Wisconsin architect or engineerICC E2 or E5, a Wisconsin Master Electrician license, or IAEI/NFPA Master Electrical InspectorA Wisconsin Master or Journeyman Plumber license
RenewalEvery 4 yrs, June 30Every 4 yrs, June 30Every 4 yrs, June 30Every 4 yrs, June 30
Continuing ed24 hrs24 hrs24 hrs24 hrs

The Wisconsin code official exam

Every certification comes with its own open-book state exam, drawn from Wisconsin’s administrative code and national codes such as the IBC or NEC. On October 1, 2026, the electrical inspector exams moved to the 2023 National Electrical Code.

Format

Open book

Questions

90–115 (UDC); we couldn’t confirm the others

Passing score

70%

Exam vendor

DSPS or Pearson VUE

Scoring & content

  • UDC Construction: 115 questions in 3 hrs, covering SPS 305, SPS 320–322 and the UDC appendix
  • UDC Electrical: 90 questions in 3 hrs, covering SPS 305, 316, 320, 324 and the 2023 NEC
  • Commercial Building (4 hrs) draws on ICC A117.1-2017, the 2021 IBC, IECC, IEBC, IFGC and IMC, SPS 361–366 and SPS 305
  • Commercial Plumbing: 3 hrs for each of two parts, covering SPS 302, 305, 381–387, NFPA 13D and six system component manuals in a single binder
  • Your printed code and notes have to be three-hole punched and kept in a three-ring binder. Tabbed dividers are allowed; loose papers, paper clips, sticky notes and removable tabs are not

Retake policy

  • We couldn’t confirm retake rules or waiting periods, so check with DSPS
  • You can’t schedule until DSPS confirms you’re eligible
  • You can’t bring practice or past exams into the testing room
  • To meet the exam requirement for Commercial Plumbing, you have to pass both parts

Books and codes for this exam (open book)

Every Wisconsin inspector exam (UDC Construction, Electrical, HVAC and Plumbing, plus Commercial Building, Electrical and Plumbing) is open book. Printed code and notes are allowed only if they’re three-hole punched and kept in a three-ring binder; tabbed binder dividers are fine, but removable tabs, sticky notes, paper clips, loose papers and practice exams aren’t.

ReferenceEditionHow it’s used
Wis. Admin. Code SPS 305 — all inspector examsNot statedAllowed in exam
Wis. Admin. Code SPS 320–322, Uniform Dwelling Code — UDC Construction Inspector examNot statedAllowed in exam
Wis. Admin. Code SPS 320, 322–323, Uniform Dwelling Code — UDC HVAC Inspector examNot statedAllowed in exam
Uniform Dwelling Code Appendix A, B and C — UDC Construction and UDC HVAC Inspector examsNot statedAllowed in exam
Wis. Admin. Code SPS 316, 320 and 324 — UDC and Commercial Electrical Inspector examsNot statedAllowed in exam
NFPA 70: National Electrical Code (NEC) — UDC and Commercial Electrical Inspector exams2023Allowed in exam
Key Word Index (NEC) — UDC and Commercial Electrical Inspector exams2023Not stated
Ugly’s Electrical References — UDC and Commercial Electrical Inspector exams2023Not stated
Wis. Admin. Code SPS 325, 381, 382 and 384 — UDC Plumbing Inspector examNot statedAllowed in exam
NFPA 13D: Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes — UDC Plumbing Inspector exam2002Allowed in exam
Wis. Admin. Code SPS 361–366 (SPS 360 is not tested) — Commercial Building Inspector examNot statedAllowed in exam
International Building Code (IBC) — Commercial Building Inspector exam2021Allowed in exam
International Mechanical Code (IMC) — Commercial Building Inspector exam2021Allowed in exam
International Fuel Gas Code (IFGC) — Commercial Building Inspector exam2021Allowed in exam
International Energy Conservation Code (IECC) — Commercial Building Inspector exam2021Allowed in exam
International Existing Building Code (IEBC) — Commercial Building Inspector exam2021Allowed in exam
ICC A117.1 Standard for Accessible and Usable Buildings and Facilities — Commercial Building Inspector exam2017Allowed in exam
Wis. Admin. Code SPS 302 and 381–387 — Commercial Plumbing Inspector exam (Parts 1 & 2)Not statedAllowed in exam
NFPA 13D Standard (National Fire Protection Association) — Commercial Plumbing Inspector exam (Parts 1 & 2)2007Allowed in exam
Component manuals in one three-ring binder: At-Grade Pressure Distribution, Holding Tank, Single Pass Sand Filter, In-Ground Soil Absorption, Mound, and Pressure Distribution — Commercial Plumbing Inspector exam (Parts 1 & 2)Not statedAllowed in exam

Starting October 1, 2026, Wisconsin’s electrical inspector exams are based on the 2023 NEC.

Prep for the Wisconsin code official exam

Our exam prep course, Total Prep and complete bundle for the Wisconsin code official exam. Prices are coming soon.

Books for this exam

Renewing your Wisconsin code official license

All Wisconsin inspector certifications run 4 years and expire on June 30. You renew by finishing 24 hours of approved continuing education and sending your renewal to DSPS.

Renewal cycle

Every 4 years

CE hours

24

Renewal fee

Not stated

Late penalty

Not stated

Licensed in another state?

Reciprocity in Wisconsin is limited. The bigger help is that DSPS lets several national credentials stand in for its own exams.

No listed reciprocity deals

We couldn’t confirm any agreements with other states. Apply as a new applicant and ask DSPS about current arrangements.

Any state: ICC waives the Commercial Building exam

The state exam is waived if you hold one of these from ICC: C5 Commercial Combination, B5 Building Inspector, C3 Combination Plans Examiner, B2 + M2, or B3 + M3.

Any state: ICC or IAEI waives the Commercial Electrical exam

Hold one of these and you skip the state exam and the experience rule: ICC E2 Commercial Electrical Inspector, ICC E5 Electrical Inspector, or IAEI/NFPA Master Electrical Inspector.

City and county rules in Wisconsin

The state issues your certification, but you do the actual inspections for a local building department.

State handles

  • Certifying UDC and commercial inspectors
  • State exams and exam eligibility
  • Renewals every 4 years and the 24-hour CE rule
  • Letting ICC, IAEI and Wisconsin trade credentials replace exams

Handled by cities & counties

  • Staffing their building departments with inspectors
  • Building permits
  • Scheduling and doing local inspections

Who oversees Wisconsin code officials

Licensing authority

Wisconsin Department of Safety and Professional Services

608-266-2112

dsps.wi.gov

What the board does

  • Issues and renews certifications for UDC and commercial inspectors
  • Confirms exam eligibility and runs the inspector exams
  • Decides which ICC, IAEI and Wisconsin credentials can stand in for an exam
  • Sets the 24-hour CE requirement

Wisconsin code official license: common questions

Is an ICC certification required to be a building inspector in Wisconsin?

No, it isn’t. Wisconsin gives its own state exams. For Commercial Building and Commercial Electrical Inspector, an ICC certification is an optional alternative.

What ICC certifications does Wisconsin accept for inspectors?

Commercial Building Inspector: C5, B5, C3, B2 with M2, or B3 with M3, and a Wisconsin architect or engineer registration counts too. Commercial Electrical Inspector: E2 or E5.

Are Wisconsin building inspector exams open book?

Every one is open book, and 70% passes. Your notes and printed code have to be three-hole punched and kept in a three-ring binder.

How long is the Wisconsin UDC Construction Inspector exam?

You get 3 hours for 115 questions. The exam covers SPS 305, SPS 320–322 and the appendix of the Uniform Dwelling Code.

Do you need experience for a Wisconsin Commercial Electrical Inspector certification?

On the exam route, yes: 6 years at 1,000 hours a year, or 3 years if you have an electrical engineering degree or a PE, architect or electrical designer credential. With a Wisconsin Master Electrician license, you skip the exam and the experience.

Can a licensed plumber get a Wisconsin plumbing inspector certification without the exam?

Yes for Commercial Plumbing Inspector, as long as you hold a current Wisconsin Master or Journeyman Plumber license. For UDC Plumbing Inspector, you have to pass the state exam.

How often do Wisconsin inspectors renew, and how many CE hours are required?

You renew every 4 years on June 30 and need 24 hours of approved continuing education.

Where this information comes from

  1. DSPS, Commercial Building Inspector
  2. DSPS, Commercial Electrical Inspector
  3. DSPS, Commercial Plumbing Inspector
  4. DSPS, UDC Construction Inspector
  5. DSPS, UDC Electrical Inspector
  6. DSPS, UDC HVAC Inspector
  7. DSPS, UDC Plumbing Inspector
  8. Wis. Admin. Code § SPS 305

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Wisconsin Department of Safety and Professional Services.