
Home Licenses Code Official License Ohio
Code Official License · Officials, Inspectors & Plans Examiners
Ohio Code Official License: Requirements, Exam and How to Apply
In Ohio, the Board of Building Standards certifies plans examiners, inspectors and building officials. Here you’ll find each class, the experience it calls for, the NCPCCI and ICC exams, and what it takes to keep your certification.
Last updated October 28, 2026 from Ohio Board of Building Standards requirements
Exam time
2 hrs
For each NCPCCI exam; ICC B2 takes 3.5 hrs
Time to get license
4–10 yrs
Experience needed, based on your class and route
Continuing ed
30 hrs
For each 3-year renewal cycle
Do you need an Ohio code official license?
Yes, if your job in Ohio is reviewing plans or inspecting work for code compliance. Each code enforcement role is certified on its own by the Ohio Board of Building Standards, which is part of the Division of Industrial Compliance in the Department of Commerce. You qualify through years of experience and then pass the ICC or NCPCCI exams that go with the role.
You need the license when
- You lead a building department as its building official
- As a plans examiner, your job is checking plans for building, electrical, mechanical or plumbing work
- As an inspector, you go out and check building, electrical, mechanical, plumbing or fire protection work
- You’re a plumbing inspector for a county board of health or the state
Exceptions
- Trade contractors doing the installation have their own licenses and don’t need code official certification
- You only need the certification for the job you actually hold, not all of them
- For several classes, Ohio-registered professional engineers and architects can count their registration as qualifying experience
Working uncertified
We couldn’t confirm specific fines. Because the Board of Building Standards decides who gets certified, doing code enforcement work without the correct certification can cost you certification or renewal. Talk to the Board before you start.
How to get an Ohio code official license in 5 steps
- Choose a certification Before you start
Figure out the role you want (inspector, plans examiner or building official) and the trade. Every combination has its own exams and experience routes. - Get qualifying experience 4–10 yrs
Expect 5 years in the trade or a certified building department for most routes, and 10 for a few. For several classes, registration as an Ohio architect or engineer counts. - Pass the exams Exam day
Sign up with whichever testing agency you like. NCPCCI exams are open book, with 50 questions in 2 hours, and the ones that list a score require 70%. Most classes also offer ICC exams. - Apply to the Board of Building Standards Application
File your certification application with the Ohio Board of Building Standards. For questions on fees and forms, call 614-466-3636. - Stay certified Every 3 years
Each 3-year cycle, renew and finish 30 hours of continuing education.
Ohio code official application checklist
Ohio’s application on one page
- Choose a role and a trade
- Proof of your qualifying experience (or Ohio architect or PE registration)
- Passing NCPCCI or ICC exam results for your class
- An application to the Ohio Board of Building Standards
- Budget for 30 hours of CE every 3 years
Ohio code official license classes
Ohio divides code enforcement by trade into building officials, plans examiners and inspectors. Every class has its own exams and experience routes, and many of them let you choose between an NCPCCI exam and the matching ICC exam.
BO Top role
Building official
Leads the building department: enforces the code, oversees inspections, issues permits and reviews plans.
| Exam | ICC MM + MG + BC |
| Limit | Residential and commercial |
BPE Plan review
Building plans examiner
Checks electrical, mechanical, fire protection, structural and architectural plans against the Ohio Building Code.
| Exam | NCPCCI 1C or ICC B3 |
| Limit | Building plans |
BI Most common
Building inspector
Checks buildings being built, renovated or altered for accessibility, fire safety and structure.
| Exam | NCPCCI 1B, 3B, 4B / ICC B2, M2 |
| Limit | Field inspections |
ESI Electrical
Electrical safety inspector
Checks electrical installations in homes, businesses and industrial buildings.
| Exam | NCPCCI 2B or ICC E2 |
| Limit | Electrical work |
EPE Electrical
Electrical plans examiner
Looks over electrical plans and specifications and approves them before any installation starts.
| Exam | NCPCCI 2C or ICC E3 |
| Limit | Electrical plans |
MECH HVAC
Mechanical inspector & plans examiner
Checks or reviews boilers, ductwork, HVAC, piping and fuel gas systems under the Ohio Mechanical Code.
| Exam | Inspector: 4B or M2. Plans: 4C or M3 |
| Limit | Mechanical systems |
PLB Plumbing
Plumbing inspector & plans examiner
Checks or reviews drainage systems, water heaters, fixtures and piping under the Ohio Plumbing Code.
| Exam | Inspector: 5B or P2. Plans: 5C or P3 |
| Limit | Plumbing systems |
FPI Fire
Fire protection inspector
Checks fire protection systems (fire alarms, sprinklers and the like) along with building structure.
| Exam | NCPCCI 3B/3C + 1B |
| Limit | Fire protection |
Requirements for each Ohio code official class
Each row lists options, and you only need one experience route. For building official, you need the ICC MM, MG and BC modules plus one of these: 5 years in non-residential design as an Ohio-registered architect or engineer, 10 years as a superintendent or general contractor, or 5 years as a residential building official.
| Requirement | Plans examiner | Inspector |
|---|---|---|
| Experience: building | Ohio architect or PE registration, 5 yrs as a building inspector, or 10 yrs in structural trades | 5 yrs in concrete, steel, masonry or carpentry, or 5 yrs in a listed code enforcement role |
| Exams: building | NCPCCI 1C or ICC B3 | NCPCCI 1B, 3B, 4B / ICC B2, M2 |
| Experience: electrical | Ohio architect or PE registration, 5 yrs as an ESI, 5 yrs of design as an architect or PE, or 10 yrs as a journeyman electrician | An Ohio-registered electrical engineer, 6 yrs as a journeyman, 4 yrs as an ESI trainee, or a mix of journeyman and trainee time |
| Exams: electrical | NCPCCI 2C or ICC E3 | NCPCCI 2B or ICC E2 |
| Experience: mechanical | Ohio architect or PE registration, 5 yrs as a mechanical or building inspector, 5 yrs in a residential code role, or 10 yrs as an HVAC tradesman | 5 yrs in a listed code enforcement role, or 5 yrs as an HVAC tradesman |
| Exams: mechanical | NCPCCI 4C or ICC M3 | NCPCCI 4B or ICC M2 |
| Experience: plumbing | Ohio architect or PE registration, 5 yrs as a plumbing inspector, or 10 yrs as a journeyman plumber | 7 yrs of plumbing installation, or an architecture or engineering degree with 3 yrs of plumbing design |
| Exams: plumbing | NCPCCI 5C or ICC P3 | NCPCCI 5B or ICC P2 |
The Ohio code official exam
For most classes Ohio takes NCPCCI exams, and for many of those same roles it also takes ICC exams. Since NCPCCI exams are open book, knowing how to use your code books counts as much as knowing the content.
Format
Open book
Questions
50 (NCPCCI)
Passing score
70% (NCPCCI)
Exam vendor
PSI, NCPCCI, ICC
Scoring and content
- NCPCCI exams (1B, 2A, 2B, 3B/3C, 4A, 4B, 5B): open book, 2 hours, 50 questions
- 2A, 3B/3C and 4A need 70% to pass; we couldn’t confirm scores for the others
- 2B and 4B are general exams; 2A and 4A cover one- and two-family dwellings
- ICC BC Building Codes and Standards: 80 questions; MM Management module: 75 questions
- ICC B2 Commercial Building Inspector: runs 3.5 hours
Retakes
- The requirements we checked don’t cover retake rules
- Book through whichever testing agency you pick
- Before booking, look up retake fees and waiting periods in that agency’s candidate bulletin
Books and codes for this exam (open book)
The NCPCCI inspector exams (1B Building, 2A Electrical, 3B/3C Fire Protection, 4A Mechanical and 5B Plumbing) are open book, so you can bring the approved code books into the testing room. The list below covers the building, electrical, fire protection and mechanical inspector exams.
| Reference | Edition | How it’s used |
|---|---|---|
| International Residential Code (IRC) — 1A Residential Building, 2A/2B Electrical and 4A/4B Mechanical exams | 2021 | Allowed in exam |
| International Building Code (IBC) — 1B Building and 3B/3C Fire Protection exams | 2021 | Allowed in exam |
| International Mechanical Code (IMC) — 4B Mechanical exam | 2021 | Allowed in exam |
| International Fuel Gas Code (IFGC) — 4B Mechanical exam | 2021 | Allowed in exam |
| NFPA 13: Standard for the Installation of Sprinkler Systems — 3B/3C Fire Protection exam | 2019 | Allowed in exam |
| NFPA 72: National Fire Alarm and Signaling Code — 3B/3C Fire Protection exam | 2019 | Allowed in exam |
| NFPA 70: National Electrical Code (NEC) — 2A/2B Electrical exams | 2020 | Allowed in exam |
The sources we checked also list 2018 editions of the IRC, IMC and IFGC for the mechanical exams and don’t name a plumbing code for the 5B/5C plumbing exams, so confirm editions in the NCPCCI candidate bulletin.
Prep for the Ohio code official exam
Our exam prep course, Total Prep and complete bundle for the Ohio code official exam. Prices are coming soon.
Books for this exam
-

2021 International Building Code
Price coming soon -

2021 International Fuel Gas Code
Price coming soon -

2021 International Mechanical Code
Price coming soon -

2021 International Residential Code
Price coming soon -

NFPA 13, Standard for the Installation of Sprinkler Systems, 2019
Price coming soon -

NFPA 70: National Electrical Code (NEC), 2020 Edition
Price coming soon -

NFPA 72: National Fire Alarm and Signaling Code, 2019 Edition
Price coming soon -

Book Tabs
Price coming soon
Renewing your Ohio code official license
You renew an Ohio code official certification every 3 years, and each cycle takes 30 hours of continuing education.
Renewal cycle
Every 3 years
CE hours
30
Renewal fee
Not stated
Late penalty
Not stated
Ohio code official CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
We couldn’t confirm any reciprocity for Ohio code official certifications.
No reciprocity agreements on record
Since none are on record, expect to apply as a new candidate and meet Ohio’s exam and experience requirements. The ICC exams listed here are national, so ask the Board if results you’ve already passed can count.
City and county rules in Ohio
The state issues your certification, but your employer will be a certified building department, the Division of Industrial Compliance or, for plumbing, a county board of health.
What the state handles
- Certifying inspectors, plans examiners and officials
- The exam and experience rules for every class
- 3-year renewals and the 30-hour CE rule
- State inspectors who work for the Division of Industrial Compliance
What cities and counties handle
- Certified building departments, which hire plans examiners, inspectors and officials
- Inspections, plan review and permits for local projects
- County boards of health, which employ plumbing inspectors
Who oversees Ohio code officials
Licensing authority
Ohio Board of Building Standards
Ohio Department of Commerce, Division of Industrial Compliance
614-466-3636
What the board does
- Certifies plans examiners, inspectors and building officials
- Decides the exam and experience rules for each class
- Certifies the building departments where code officials work
- Handles renewals and enforces the CE requirement
Ohio code official license: common questions
Who certifies Ohio building inspectors and code officials?
The Ohio Board of Building Standards does. It’s part of the Division of Industrial Compliance within the Department of Commerce, and its number is 614-466-3636.
Does Ohio use ICC exams for code official certification?
Yes, for a lot of classes. Building officials take ICC modules MM, MG and BC. Most plans examiner and inspector classes let you pick an NCPCCI exam or the matching ICC exam, like B2, E2, M2 or P2.
How much experience does an Ohio building inspector certification require?
You need five years in concrete work, steel erection, masonry or structural carpentry, or five years in a listed code enforcement job such as residential building inspector.
Are Ohio code inspector exams open book?
Yes. NCPCCI exams are open book and give you 2 hours for 50 questions. Where a score is listed, it’s 70% to pass.
Can an architect or engineer become an Ohio plans examiner?
Yes. Being registered in Ohio as a professional engineer or architect is a qualifying route for plans examiner in building, electrical, mechanical and plumbing.
How do you become an Ohio electrical safety inspector?
You can qualify as an Ohio-registered electrical engineer or through trainee and journeyman experience, like 4 years as an ESI trainee or 6 years as a journeyman. After that, pass ICC E2 or NCPCCI 2B.
How often does an Ohio code official certification renew?
Once every 3 years, and each cycle takes 30 hours of continuing education.
Where this information comes from
- Ohio Department of Commerce, Board of Building Standards
- NCPCCI candidate information (PDF)
- PSI Exams
- International Code Council (ICC) certification exams: MM, MG, BC, B2, B3, E2, E3, M2, M3, P2, P3
Last updated October 28, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Ohio Board of Building Standards.