Texas Well driller Continuing Education: Hours, Deadline and How to Renew, Texas Well Driller Continuing Education, Texas, Texas Department of Licensing and Regulation (TDLR), Texas Well Driller Continuing Education hours, Texas Well Driller Continuing Education renewal deadline, Texas license renewal, online Texas Well Driller Continuing Education, required CE topics, CE reporting, Registered Apprentice, None, CE provider, Linden Prep, Linden Prep licensing guides

Home Continuing education Well Driller Continuing Education Texas

Well Driller CE · Well Driller & Pump Installer

Texas Well driller Continuing Education: Hours, Deadline and How to Renew

Every two years, Texas water well drillers and pump installers have to earn 8 hours of CE approved by TDLR, with 1 hour on the statutes and rules for water well drillers and pump installers. Finish before your license expires.

Last updated October 28, 2026 from Texas Department of Licensing and Regulation (TDLR) requirements

Hours per cycle

8 hrs

1 hour on laws and rules and 7 hours on industry subjects (Apprentices need 1 hr)

Cycle

2 years

You renew water well driller and pump installer licenses every 2 years

Deadline

Your license expiration date

Two years after your license was issued

Online allowed?

Yes

You can take TDLR-approved CE online

Texas well driller CE at a glance

Texas well driller renewal at a glance

Renewed withTexas Department of Licensing and Regulation (TDLR)
CE required?Yes
Hours per cycle8 hrs (Apprentices need 1 hr)
Cycle2 years
Required topics1 hr on water well driller/pump installer statutes and rules
Online allowed?Yes
DeadlineYour expiration date (2 years after issue)
Who reportsYour CE provider reports online within 7 days
CarryoverNo
Grace periodNone for working; you can renew late for up to 18 months with a penalty
Renewal fee$430 for a single license; $650 for a combination; $65–$115 for apprentices
Last updatedOctober 28, 2026

Who has to complete Texas well driller CE?

If you’re a licensed Texas water well driller or pump installer, or a registered apprentice, you need CE every two years to renew. The state handles renewal through TDLR; your county and your groundwater conservation district don’t.

CE applies to

  • Water Well Drillers with a license (8 hours every 2 years)
  • Pump Installers and Combination licensees (8 hours every 2 years)
  • Water Well Driller and Pump Installer Apprentices who are registered (1 hour every 2 years)

Exemptions

  • TDLR rules don’t list any exemptions

How many CE hours a Texas well driller needs

16 TAC §76.25 requires licensed water well drillers and pump installers to earn 8 hours of CE approved by TDLR every two years. That’s 1 hour on the Texas statutes and rules for water well drillers and pump installers, plus 7 hours on industry subjects. If you’re a registered apprentice, you need 1 hour on statutes and rules.

ClassTotalRequired topicsElectivesDelivery limits
Water Well Driller / Pump Installer / Combination8 hrs1 hr on Texas water well driller & pump installer statutes and rules7 hrs on water well industry subjectsOnline is allowed through TDLR-approved providers
Registered Apprentice1 hr1 hr on Texas water well driller & pump installer statutes and rulesNoneOnline is allowed through TDLR-approved providers

Industry subjects that count include well standards, geologic characteristics, state groundwater laws, how wells are built and pumps installed, OSHA health and safety, environmental protection, new technology and business management.

Texas well driller renewal deadline

Your Texas water well driller or pump installer license expires every two years, on a date tied to when you were licensed. Earn your 8 hours while your two-year license term is active, and renew with TDLR ahead of your expiration date.

Deadline ruleEvery 2 years on your license expiration date
Cycle2 years
Grace periodYou can’t drill wells or install pumps while expired; you can renew late for up to 18 months
Late penaltyUp to 90 days late: 1.5x the renewal fee ($645 single / $975 combo). From 91 days to 18 months: 2x the fee ($860 single / $1,300 combo)
CE completion deadlineDuring your active 2-year license term, before you file your renewal

How to renew a Texas well driller license

  1. Take approved CE Ahead of your deadline
    Finish 8 hours of CE that TDLR approved, with 1 hour on the statutes and rules for water well drillers and pump installers (apprentices need 1 hour in all).
  2. Get your certificate Same day
    Hold on to a certificate of completion from every course, and keep each one for 2 years or more.
  3. Check that it’s reported Within 7 days
    Your CE provider, registered with TDLR, has 7 days to report your finished hours online. Look yourself up in the TDLR CE lookup before you renew.
  4. Pay the renewal fee
    Renew online with TDLR and pay $430, or $650 if you hold a combination Driller/Pump Installer license.
  5. Confirm your license status After renewal
    Check with TDLR that your license now shows the new expiration date two years ahead.

How to tell a Texas well driller course is approved

Under 16 TAC §76.25 and Chapter 59, your 8 hours count only if the CE is TDLR-approved and comes from a registered provider.

  • Before you pay, make sure TDLR approved both the provider and the course number.
  • Check that 1 of your 8 hours deals with the Texas statutes and rules for water well drillers and pump installers (16 TAC Chapter 76 and Occupations Code Chapters 1901–1902).
  • Confirm you hit 8 hours in total during your two-year license term.

Before you pay for a course, check the board’s approved provider list to make sure it counts. Training counts only if the Texas Department of Licensing and Regulation (TDLR) approved it.

How your hours get reported, and audits

16 TAC Chapter 59 gives your TDLR-registered CE provider 7 days to report your finished hours to TDLR online. After that, you file your own renewal application online.

  • Hold on to each completion certificate for 2 years or more.
  • Before you renew, make sure your hours show up in TDLR’s online CE lookup.
  • Keep your certificates in case TDLR audits your renewal.

What Texas well driller renewal costs

ItemFeePaid to
Renewing a Well Driller or Pump Installer license (2-year)$430Texas Department of Licensing and Regulation (TDLR)
Renewing a Combination Driller & Pump Installer license$650Texas Department of Licensing and Regulation (TDLR)
Renewing an Apprentice registration (Single / Combination)$65 / $115Texas Department of Licensing and Regulation (TDLR)
Renewing late (up to 90 days / 91 days–18 mos)1.5x fee / 2x feeTexas Department of Licensing and Regulation (TDLR)
CE courses (8 hours)Varies by providerCE provider

Checked October 2026 against 16 TAC §76.80 and the fee schedule TDLR publishes for Water Well Drillers and Pump Installers.

Late, expired or inactive licenses

While your license is expired, you can’t legally drill water wells or install pumps in Texas. TDLR lets you renew late for up to 18 months with a late fee that rises over time, or for up to 3 years if the Executive Director approves.

Grace period & late fees

You can’t work at all while expired. If you renew 1 to 90 days late, you pay 1.5x the standard fee ($645 single / $975 combination). If you renew 91 days to 18 months late, you pay 2x ($860 single / $1,300 combination).

Makeup CE

TDLR won’t process a late renewal until you have all 8 hours, including the 1 hour on statutes and rules.

Expired for more than 18 months

If your license has been expired for 18 months to 3 years, you need to make a request to the Executive Director. After 3 years or more, you have to apply again and retake the licensing exams.

Who handles Texas well driller renewals

Renewal authority

Texas Department of Licensing and Regulation (TDLR)

920 Colorado St., Austin, TX 78701

Phone: (800) 803-9202 or (512) 463-6599

Website: tdlr.texas.gov/wwd

What the board does

  • Issues Texas water well driller and pump installer licenses and handles renewals
  • Approves CE courses and providers for well drillers and pump installers
  • Sets the 8-hour CE rule for each two-year cycle under 16 TAC §76.25

Texas well driller CE: common questions

How many CE hours does a Texas well driller need to renew?

Every two years you need 8 hours of CE approved by TDLR: 1 hour on Texas statutes and rules for water well drillers/pump installers, and 7 hours on industry subjects. Apprentices need 1 hour on statutes and rules.

When is the Texas well driller license renewal deadline?

Your license expires every two years, on a date tied to when you were licensed. Earn your CE while the license term is active and renew ahead of expiration.

How often do I renew a Texas well driller license?

Every two years, under 16 TAC §76.25 and §76.80.

Can Texas well drillers take CE online?

Yes. You can take all 8 hours through online courses that TDLR approved.

Who reports Texas well driller CE hours?

Your CE provider, registered with TDLR, reports your completion to TDLR online within 7 days. Hold on to your certificate for 2 years or more.

Do Texas well driller CE hours carry over?

No. Extra hours don’t roll into the next two-year renewal cycle.

Where this information comes from

  1. TDLR Water Well Drillers and Pump Installers Continuing Education
  2. TDLR Water Well Drillers and Pump Installers License Renewal
  3. TDLR Water Well Drillers and Pump Installers Fees
  4. Texas Occupations Code, Chapters 1901 & 1902
  5. Texas Administrative Code, Title 16, Chapter 76 & Chapter 59

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Texas Department of Licensing and Regulation (TDLR).