
Home Licenses Specialty Contractor License Arkansas
Specialty Contractor · Carpentry, Drywall & Insulation
Arkansas Specialty Contractor License: Requirements, Exam and How to Apply
Three Arkansas specialty trades are covered here: drywall; insulation; and carpentry, framing, millwork and cabinets. Learn who needs a license, what the Arkansas Contractors Licensing Board requires and how the PSI exams work.
Last updated October 27, 2026 from Arkansas Contractors Licensing Board requirements
Exam time
75 min
For the trade exam; Business & Law takes another 120 min
Time to get license
Varies
For drywall, references must show 2 years of experience
Continuing ed
Not required
You don’t need CE to renew
Do you need an Arkansas specialty contractor license?
Usually, yes. Arkansas requires a license for structural changes to a single-family home once the job goes over $2,000, and specialty trades such as carpentry and insulation get their own residential and commercial licenses. Drywall licenses come in limited and unlimited versions depending on job size.
You need the license when
- Structural changes to a single-family home on any job above $2,000
- Contracting for carpentry, framing, millwork or cabinet work, residential or commercial
- Contracting for insulation work, residential or commercial
- Drywall jobs of $50,000 or more (these need the unlimited license)
Exceptions
- Structural work on a home of $2,000 or less is under the licensing threshold
- For drywall jobs below $50,000 (labor and materials counted), a limited license works in place of an unlimited one
Penalties for unlicensed work
We couldn’t confirm specific penalty amounts. The Arkansas Contractors Licensing Board can act against anyone who contracts without the license they need, so get yours before you bid or sign anything.
How to get an Arkansas specialty contractor license in 6 steps
- Choose your trade and class Before you start
For carpentry or insulation, pick residential or commercial. For drywall, pick limited (below $50,000) or unlimited. - Gather experience and references Before you apply
Find three references who can be verified and who know your construction work. If you’re applying for drywall, your references must show 2 years of experience. - Get your business paperwork ready Before you apply
If you’re an LLC, corporation, LP or LLP, you need proof that you’re in good standing with the Arkansas Secretary of State. - Pass your PSI exams Exam day
You take Business & Law (120 minutes for 50 questions) and your trade exam (75 minutes for 30 questions, pass at 70%). Book through PSI or by calling (855) 257-1620. - Get financials, bond and insurance ready Before you apply
You need a compiled balance sheet or financial statement, a $10,000 contractor’s bond if your trade requires one, and proof that you comply with workers’ comp rules. - Apply to the Board
The last stop is the Arkansas Contractors Licensing Board, which takes your application. Questions go to 501-372-4661, and the board’s site is aclb.arkansas.gov.
Arkansas specialty contractor application checklist
Your Arkansas application on one page
- Three references who can be verified
- Proof of your experience in the trade
- Passing scores on Business & Law and your trade exam
- Compiled balance sheet or financial statement
- $10,000 contractor’s bond, if your trade needs one
- Proof of workers’ comp and good standing with the Secretary of State
Arkansas specialty contractor license classes
Each specialty trade has its own license in Arkansas. Carpentry and insulation each have a residential and a commercial version. Drywall is limited or unlimited, and PSI gives one drywall exam for residential and another for commercial.
CFM-R Residential
Residential Carpentry, Framing, Millwork, Cabinets
Carpentry, framing, millwork and cabinets on residential jobs, covering how wood elements are built, installed and finished.
| Exam | B&L + carpentry exam |
| Limit | Not stated |
CFM-C Commercial
Commercial Carpentry, Framing, Millwork, Cabinets
The same wood scope as the residential license, applied to commercial jobs.
| Exam | B&L + carpentry exam |
| Limit | Not stated |
DRY-L Smaller jobs
Limited Drywall
Drywall jobs below $50,000, counting labor and materials.
| Exam | B&L + drywall exam |
| Limit | Under $50,000 |
DRY-U Any size
Unlimited Drywall
Drywall jobs with no size limit.
| Exam | B&L + drywall exam |
| Limit | No limit |
INS-R Residential
Residential Insulation
On homes and duplexes: installing, repairing and replacing vapor retarders and batt, blown, spray-applied, rigid board and reflective insulation.
| Exam | B&L + insulation exam |
| Limit | Not stated |
INS-C Commercial
Commercial Insulation
Insulation systems on larger and non-residential jobs, HVAC insulation and soundproofing included, with tougher financial and bonding rules.
| Exam | B&L + insulation exam |
| Limit | Not stated |
Requirements for each Arkansas specialty contractor class
All three trades require three references and a passing score on Business & Law. The experience and paperwork differ slightly from trade to trade.
| Requirement | Carpentry, Framing, Millwork, Cabinets | Drywall (unlimited) | Insulation |
|---|---|---|---|
| Experience | 1 year, can be verified | 2 years, backed by references | Relevant and can be verified |
| References | 3, can be verified | 3 | 3, can be verified |
| Exams | Business & Law and trade | Business & Law and drywall | Business & Law and trade |
| Financial statement | Compiled, showing positive net worth | Compiled balance sheet less than 1 year old | Compiled, showing positive net worth |
| Contractor’s bond | $10,000 | Not stated | $10,000 |
| Workers’ compensation | Proof of compliance | Required if you have more than 1 employee | Proof of compliance |
| Business entity in good standing | Not stated | Required for LLCs, corporations, LPs and LLPs | Not stated |
The Arkansas specialty contractor exam
There are two exams: Business & Law, which everyone takes, and the trade exam for your specialty. You can use references on the trade exams, so practice finding answers in them quickly.
Format
Open book
Questions
30 + 50
Passing score
70% (trade)
Exam vendor
PSI
Scoring and content
- Trade exams: 30 questions in 75 minutes, pass at 70%
- Business & Law: 50 questions in 120 minutes
- Carpentry covers materials, fabrication, installation, finishing and OSHA safety
- Drywall covers drywall installation, taping and finishing, ceilings and acoustical systems, veneer plaster and OSHA safety
- Insulation covers batt and roll, blown, spray-on, rigid board and reflective insulation, plus vapor retarders and OSHA safety
Retakes
- You pay $84 per exam, and that fee applies again for a retake
- Read the PSI Candidate Information Bulletin for your trade
- Call PSI at (855) 257-1620 to schedule or reschedule
Books and codes for this exam (open book)
The Carpentry, Framing, Millwork and Cabinets, Drywall and Insulation exams are open book, as is the Arkansas Business and Law exam, so you can bring the permitted references into the test. The official lists are in the trade outlines linked from the PSI candidate information bulletin for each trade.
| Reference | Edition | How it’s used |
|---|---|---|
| OSHA 29 CFR 1926: Safety and Health Regulations for Construction — Carpentry, Drywall and Insulation exams | Not stated | Allowed in exam |
| Carpentry & Building Construction, Student Edition — Carpentry and Insulation exams | 2016 | Allowed in exam |
| Finish Carpenter’s Manual — Carpentry, Framing, Millwork and Cabinets exam | Not stated | Allowed in exam |
| The Complete Illustrated Guide to Furniture & Cabinet Construction — Carpentry, Framing, Millwork and Cabinets exam | Not stated | Allowed in exam |
| PDCA Craftsman Manual & Textbook — Carpentry, Framing, Millwork and Cabinets exam | 8th edition | Allowed in exam |
| International Building Code (IBC) — Drywall exam | 2015 | Allowed in exam |
| The Gypsum Construction Handbook (USG) — Drywall exam | 7th edition | Allowed in exam |
| Insulation Handbook (Bynum and Rubino) — Insulation exam | 2000 | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management (Arkansas edition) — Business and Law exam | 8th edition | Allowed in exam |
The Insulation Handbook is out of print, so you may have trouble finding a copy.
Prep for the Arkansas specialty contractor exam
Our exam prep course, Total Prep and complete bundle for the Arkansas specialty contractor exam. Prices are coming soon.
Books for this exam
-

2015 International Building Code
Price coming soon -

Finish Carpenter’s Manual
Price coming soon -

Gypsum Construction Handbook, 7th Edition
Price coming soon -

Insulation Handbook, 2000
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Arkansas 8th Edition
Price coming soon -

PCA Craftsman Manual & Textbook, 8th edition
Price coming soon -

Safety and Health Regulations for Construction (29 CFR Part 1926)
Price coming soon -

The Complete Illustrated Guide to Furniture & Cabinet Construction
Price coming soon -

Book Tabs
Price coming soon
Renewing your Arkansas specialty contractor license
Renewing an Arkansas specialty contractor license takes no continuing education. It’s a yearly renewal: a commercial license costs $50 and a Home Improvement license costs $25.
Renewal cycle
Annual
CE hours
Not required
Renewal fee
$50 commercial, $25 Home Improvement
Late penalty
Not stated
Licensed in another state?
If you hold a substantially equivalent license in another jurisdiction, Arkansas may grant reciprocity. We couldn’t confirm any specific partner states.
Other states: case by case
A substantially equivalent license may qualify for reciprocity. Before you apply, ask the Board if yours does.
City and county rules in Arkansas
The Arkansas Contractors Licensing Board issues your state specialty license. The job-site side is handled by cities and counties.
What the state handles
- Specialty contractor licenses and classes
- Exams, given by PSI
- Financial, bonding and workers’ comp rules
- Renewals
What cities and counties handle
- Building permits and inspections
- Local business licenses
- Local code enforcement
Who oversees specialty contractors in Arkansas
What the board does
- Issues and renews specialty and contractor licenses
- Sets the experience, financial and bond requirements
- Reviews requests for reciprocity
- Enforces the licensing rules
Arkansas specialty contractor license: common questions
Do you need a license to do drywall in Arkansas?
Yes, when the Board regulates the work. With a limited drywall license you can take jobs under $50,000 (labor and materials counted), and an unlimited license has no size limit.
When does Arkansas require a contractor license for home projects?
In Arkansas, you need a license for structural changes to a single-family home once the job goes over $2,000.
Which exams do you need for an Arkansas specialty contractor license?
There are two, both given by PSI: Business & Law (120 minutes, 50 questions) and your specialty’s trade exam (75 minutes, 30 questions, pass at 70%).
Are the Arkansas specialty contractor trade exams open book?
Yes. You can use references on the carpentry, drywall and insulation exams. The PSI Candidate Information Bulletin for each trade lists which references are allowed.
How much experience do you need for an Arkansas specialty contractor license?
That depends on your trade. For drywall, three references must show 2 years of construction experience. Carpentry asks for 1 year of experience that can be verified, and insulation asks for relevant experience that can be verified.
Does Arkansas require continuing education to renew a specialty contractor license?
No. You can renew these Arkansas specialty licenses without any continuing education.
Does Arkansas accept an out-of-state specialty contractor license?
If your license from another jurisdiction is substantially equivalent, you may get reciprocity. Ask the Board to review your license.
Where this information comes from
- Arkansas Contractors Licensing Board
- PSI, Arkansas contractor exam scheduling
- PSI Candidate Information Bulletin (carpentry, framing, millwork, cabinets)
- PSI Candidate Information Bulletin (drywall)
- PSI Candidate Information Bulletin (insulation)
- Arkansas Contractors Licensing Board, Commercial license application (10/2026)
- Arkansas Contractors Licensing Board, Home Improvement Specialty license application (1/2025)
- Arkansas Contractors Licensing Board, online license renewal
- Arkansas Contractors Licensing Board, Renew a license
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Arkansas Contractors Licensing Board.