Arizona Low Voltage License: Requirements, Exam and How to Apply, Arizona Low Voltage License, Arizona, Commercial low voltage, Residential low voltage, Dual low voltage, Retake policy, Arizona Registrar of Contractors, how to get a Arizona Low Voltage License, Arizona Low Voltage License requirements, Arizona Low Voltage License exam, Arizona licensing board, Arizona contractor license, license application steps, exam reference books, PSI Low Voltage + SRE, Commercial only, Residential only, Commercial and residential, Experience, Trade exam, Required

Home Licenses Low Voltage License Arizona

Low Voltage License · Commercial, Residential & Dual

Arizona Low Voltage License: Requirements, Exam and How to Apply

Here’s how to qualify for a C-67, R-67 or CR-67 Low Voltage Communication Systems license in Arizona: the experience you need, the exams you take and how to apply with the Registrar of Contractors.

Last updated October 27, 2026 from Arizona Registrar of Contractors requirements

Exam time

2 hrs

A 60-question trade exam, then the SRE online

Time to get license

~2 yrs

Managerial or hands-on experience, followed by the exams and your application

Continuing ed

Not stated

We couldn’t confirm this

Do you need an Arizona low voltage license?

Yes, if your Arizona work is installing or repairing low voltage communication systems such as alarm, sound, intercom, phone and TV video systems. The Arizona Registrar of Contractors (ROC) licenses it as C-67 (commercial), R-67 (residential) or CR-67 (both).

You need the license when

  • You repair or install alarm, telephone, sound or intercom systems
  • You work on low voltage signaling, television video or public address systems
  • You put in low voltage landscape lighting rated up to 91 volts
  • You wire master program clocks (limited to low voltage equipment and wiring)

Exceptions

  • This classification doesn’t cover landscape lighting above 91 volts
  • Anything that isn’t low voltage calls for another ROC classification, an electrical license for example
  • We couldn’t confirm owner or handyman exemptions, so check with the ROC

Penalties for unlicensed work

The sources we checked don’t give penalty amounts. The Registrar of Contractors can look into unlicensed contracting and take enforcement action, so have your license before you bid or begin a job.

How to get an Arizona low voltage license in 6 steps

  1. Choose a classification Before you start
    Commercial work means C-67, residential means R-67, and both means CR-67.
  2. Build 2 years of experience Before you apply
    The qualifying party needs 2 years of experience in low voltage communication systems, hands-on, managerial or a mix.
  3. Pass the trade exam through PSI Exam day
    Book the Low Voltage Communication Systems exam through PSI at psiexams.com or by calling 855-744-0310. You get 60 open-book questions, and 70% passes.
  4. Finish the SRE Online only
    The ROC offers the Arizona Statutes and Rules Training Course and Exam online.
  5. Take care of the business details Before you apply
    Get your bond, register your business, and finish background checks for each person on the application.
  6. Apply through the ROC
    Use the ROC license checklist to send in your application. You have to pass the exam first.

Arizona low voltage application checklist

Arizona’s application on one page

  • Your classification picked: C-67, R-67 or CR-67
  • Proof of 2 years of experience for the qualifying party
  • A passing score on the PSI Low Voltage exam
  • The Statutes and Rules Training Course and Exam, done
  • A background check for each person on the application
  • Your bond and business registration

Arizona low voltage license classes

The low voltage scope is identical across all three classifications. What changes is the type of property you can work on: commercial, residential or both.

C-67 Commercial

Commercial low voltage

Low voltage signaling, TV video, public address, intercom, sound, phone and alarm systems on commercial properties.

ExamPSI Low Voltage + SRE
LimitCommercial only

R-67 Residential

Residential low voltage

Covers the same low voltage communication systems work, but on residential properties.

ExamPSI Low Voltage + SRE
LimitResidential only

CR-67 Most flexible

Dual low voltage

Lets you do all low voltage communication systems work on residential and commercial properties alike.

ExamPSI Low Voltage + SRE
LimitCommercial and residential

Requirements for each Arizona low voltage class

Every classification asks the qualifying party for the same experience and exams. You also need bonding, background checks and business registration.

RequirementC-67R-67CR-67
Experience2 years, managerial or hands-on2 years, managerial or hands-on2 years, managerial or hands-on
Trade examPSI Low Voltage, 70% to passPSI Low Voltage, 70% to passPSI Low Voltage, 70% to pass
Statutes & rulesSRE course and examSRE course and examSRE course and exam
Background checkRequiredRequiredRequired
BondRequired (we couldn’t confirm the amount)Required (we couldn’t confirm the amount)Required (we couldn’t confirm the amount)
Business registrationRequiredRequiredRequired

The Arizona low voltage exam

There are two parts: a PSI trade exam and the ROC’s online SRE (Statutes and Rules Training Course and Exam). The trade exam lets you bring your references, and you’re allowed to tab, highlight and write in them.

Format

Open book, computer

Questions

60

Passing score

70%

Exam vendor

PSI

Scoring and content

  • 120 minutes for 60 questions
  • Covers conductors, grounding and bonding, PA systems, fire and security alarms, digital communications, and general low voltage electrical knowledge
  • See the PSI Candidate Information Bulletin for the references you can bring
  • Tabbing, highlighting and writing in your references is allowed
  • The ROC gives the SRE as its own online course and exam

Retake policy

  • Retakes need a 30-day wait; once you’ve tried 3 times, the wait becomes 90 days
  • You pay the full $66 PSI fee every time you test
  • Book or reschedule with PSI at 855-744-0310
  • Pass first, then send in your application

Books and codes for this exam (open book)

The C-67, R-67 and CR-67 Low Voltage Communication Systems exam is open book. You’re allowed to highlight, tab and write in the permitted references you bring to the exam.

ReferenceEditionHow it’s used
OSHA 29 CFR 1926: Safety and Health Regulations for ConstructionNot statedAllowed in exam
NFPA 70: National Electrical Code (NEC)2017Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code2016Allowed in exam
Low Voltage Wiring: Security/Fire Alarm Systems3rd editionStudy only
Telecommunications Wiring3rd editionStudy only
Understanding and Servicing Alarm Systems3rd editionStudy only
Live Sound ReinforcementBest Seller EditionStudy only
Data, Voice and Video Cabling3rd editionStudy only
Telecommunications Distribution Methods Manual (BICSI)Not statedStudy only

Prep for the Arizona low voltage exam

Our exam prep course, Total Prep and complete bundle for the Arizona low voltage exam. Prices are coming soon.

Books for this exam

Renewing your Arizona low voltage license

We couldn’t confirm any continuing education rules for low voltage licenses, so ask the ROC. Renewal comes every two years. R classes pay $270 plus a $270 Recovery Fund assessment, C classes pay $480, and CR classes pay $380 plus $270. Miss the deadline and you owe a $50 penalty.

Renewal cycle

Every 2 years

CE hours

Not stated

Renewal fee

$480–$650

Late penalty

$50

Licensed in another state?

We couldn’t find a reciprocity agreement for the low voltage classifications. Some applicants may be able to get an exam waiver, though, so check with the ROC before you book.

No reciprocity agreements

We couldn’t find any for C-67, R-67 or CR-67. Apply as a new applicant, or ask the ROC if you’re eligible for a waiver.

City and county rules in Arizona

The ROC license is good anywhere in Arizona. Permits and inspections for each job still go through the city or county.

State handles

  • C-67, R-67 and CR-67 licenses
  • Trade exams (given by PSI)
  • The Statutes and Rules Training Course and Exam
  • Bonding and background checks

City and county handle

  • Permits for each job
  • Inspections
  • Local business licenses, if your area requires one

Who oversees low voltage contractors in Arizona

Licensing authority

Arizona Registrar of Contractors

roc.az.gov

What the board does

  • Issues C-67, R-67 and CR-67 licenses and handles renewals
  • Offers the Statutes and Rules Training Course and Exam
  • Reviews the background check for each person on an application
  • Sets the bonding rules for licensed contractors

Arizona low voltage license: common questions

Arizona C-67 vs. R-67 vs. CR-67 low voltage license: what’s the difference?

All three cover identical low voltage work. The C-67 is limited to commercial jobs, the R-67 to residential jobs, and the CR-67 lets you do both.

How much experience do I need for an Arizona low voltage license?

The qualifying party needs 2 years of experience, hands-on, managerial or both.

Is the Arizona low voltage license exam open book?

Yes. You can bring references to the PSI exam and tab, highlight and write in them. It’s 60 questions in 120 minutes, and you need 70%.

What is the SRE for an Arizona low voltage license?

It’s the Arizona Statutes and Rules Training Course and Exam: computer-based training with a test at the end. You can only take it online through the ROC.

Can I do fire alarm work with an Arizona CR-67 license?

Alarm systems are in the scope, and the exam covers fire and security alarms. Still, check with the ROC to see if your particular fire alarm work calls for a different classification.

Do I need an Arizona low voltage license for landscape lighting?

This classification covers low voltage landscape lighting up to 91 volts. Lighting above 91 volts isn’t included.

Where this information comes from

  1. Arizona Registrar of Contractors, Get a License checklist
  2. PSI, Arizona contractor exam catalog
  3. PSI, Arizona Candidate Information Bulletin
  4. Arizona Administrative Code, R4-9-130 Schedule of Fees (PDF)
  5. Arizona Revised Statutes, 32-1126 Fees
  6. Arizona Registrar of Contractors, License and Renewal Fees

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Arizona Registrar of Contractors.