Arizona Electrician License: Requirements, Exam and How to Apply, Arizona Electrician License, Arizona, Residential Electrical, including Solar, Commercial Electrical, Dual Electrical, Retake policy, Arizona Registrar of Contractors, how to get a Arizona Electrician License, Arizona Electrician License requirements, Arizona Electrician License exam, Arizona licensing board, Arizona contractor license, license application steps, exam reference books, PSI Residential or NASCLA, PSI Commercial or NASCLA, Experience, Trade exam, Statutes and Rules

Home Licenses Electrician License Arizona

Electrical Contractor · Residential, Commercial & Dual

Arizona Electrician License: Requirements, Exam and How to Apply

There are three electrical contractor classifications in Arizona: R-11 (residential), C-11 (commercial) and CR-11 (dual). Below you’ll find the scope of each, the exams, the bond amounts and the steps to apply through the Registrar of Contractors.

Last updated October 27, 2026 from Arizona Registrar of Contractors requirements

Exam time

4 hrs

For the state trade exam; the NASCLA option runs 4.5 hrs

Time to get license

~4 yrs

Managerial or hands-on, 4 years total

Continuing ed

Not required

You don’t need CE to renew

Do you need an Arizona electrician license?

Yes, if you contract for electrical work in Arizona. Licenses come from the Arizona Registrar of Contractors (ROC), and the classification you hold sets whether you can work on homes, commercial buildings or both.

You need the license when

  • You take contracts to repair or install residential electrical systems, solar included (R-11)
  • Commercial jobs: you’re hired to work on electrical wiring and equipment below 600 volts (commercial, C-11)
  • You plan to do commercial and residential electrical work (CR-11)
  • Your work is underground distribution under 600 volts that serves private property, or overhead wiring for signs and street decorations on public right-of-ways (C-11)

Exceptions

  • We couldn’t confirm any exemptions, so ask the ROC before counting on one.
  • R-11 holders can’t do commercial work, and C-11 holders can’t do residential work. If you’ll do both, you need a CR-11.

Penalties for unlicensed work

The Registrar can take enforcement action if you contract without the correct ROC license. We don’t cover penalty amounts here, so talk to the ROC before you accept work.

How to get an Arizona electrician license in 6 steps

  1. Pick a classification Before you start
    Homes mean R-11, commercial work means C-11, and both mean CR-11. That decision sets which exam you take and how big your bond is.
  2. Set up your business Before you apply
    The license has to go to a legal entity in Arizona, so form yours before anything else.
  3. Pass a trade exam through PSI Exam day
    You can sit for either the NASCLA electrical exam or the Arizona electrical exam, and both are open book. Book through PSI or by phone at 855-744-0310. You have to pass before you can apply.
  4. Finish the Statutes and Rules course Online only
    The SRE (AZ Statutes and Rules Training Course and Exam) pairs computer-based training with a test at the end. The ROC offers it online and nowhere else.
  5. Arrange your bond and background checks Before you apply
    Anyone named on your application has to pass a background check. Your surety bond is sized by the annual volume you expect.
  6. Apply through the ROC Final step
    Use the ROC license checklist to put together and send your application to the Registrar of Contractors.

Arizona electrician application checklist

Arizona’s application on one page

  • Proof of 4 years of managerial or hands-on experience
  • A passing score on the NASCLA or PSI electrical exam
  • The Statutes and Rules course and exam, done
  • A legal business entity
  • A background check for each person on the application
  • A surety bond that fits your classification and volume

Arizona electrician license classes

Electrical contractor licenses in Arizona come in residential, commercial and dual versions. Whichever you choose, you need 4 years of experience, a trade exam and the Statutes and Rules course. The differences are the bond and what work you can do.

R-11 Residential

Residential Electrical, including Solar

Repair and install home electrical systems, solar included.

ExamPSI Residential or NASCLA
LimitBond $4,250–$7,500

C-11 Commercial

Commercial Electrical

Covers electrical equipment and wiring under 600 volts: installing, altering and repairing it. That includes underground distribution to private property and overhead right-of-way wiring for signs.

ExamPSI Commercial or NASCLA
LimitBond $2,500–$50,000

CR-11 Both scopes

Dual Electrical

Includes the full scope of both the R-11 and the C-11.

ExamPSI Commercial or NASCLA
LimitR-11 + C-11 bonds

Requirements for each Arizona electrician class

All three classifications share the same core requirements. Your scope determines the bond and which trade exam you take.

RequirementR-11 ResidentialC-11 CommercialCR-11 Dual
Experience4 years, managerial or hands-on4 years, managerial or hands-on4 years, managerial or hands-on
Trade examPSI Residential Electrical or NASCLA residential electricalPSI Commercial Electrical or NASCLA Electrical ContractorPSI Commercial Electrical or NASCLA Electrical Contractor
Statutes and RulesSRE course and examSRE course and examSRE course and exam
Background checkEveryone named on the applicationEveryone named on the applicationEveryone named on the application
Business entityMust be a legal entityMust be a legal entityMust be a legal entity
Surety bond$4,250 if volume is under $375,000; $7,500 if higher$2,500–$50,000, based on annual volumeBoth the R-11 and C-11 bonds
Continuing edNot requiredNot requiredNot required

The Arizona electrician exam

There are two pieces: a single trade exam (Arizona’s state exam or the NASCLA electrical exam) and the Statutes and Rules course with its exam. You can bring books to either trade exam, so learn your references well.

Format

Open book

Questions

110 (state) or 100 (NASCLA)

Passing score

70% (state) or 75 correct (NASCLA)

Exam vendor

PSI

Scoring and content

  • Arizona electrical exam: 240 minutes for 110 questions; 70% passes
  • NASCLA electrical exam: 270 minutes for 100 questions; 75 right passes
  • The state exam covers motors, photovoltaics, fire alarm systems, overcurrent protection, and grounding and bonding
  • See the PSI Candidate Information Bulletin for the references you can bring
  • Before test day you can highlight, tab and mark up your books; during the exam you can’t write in them

Retake policy

  • Wait 30 days to retake (90 days after your third try)
  • Each retake costs $66
  • Book or retake with PSI at 855-744-0310
  • Pass first, then send in your license application

Books and codes for this exam (open book)

The Arizona C-11, CR-11 and R-11 electrical exams are open book, and the permitted references can be tabbed and highlighted. You can annotate your books before the exam, but you can’t write in them during the test.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2017Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code2016Allowed in exam
OSHA 1926: Construction Industry RegulationsNot statedAllowed in exam
Ugly’s Electrical References2020Study only
Photovoltaic SystemsNot statedStudy only
The Easy Guide to Solar Electric Part II: Installation ManualNot statedStudy only

This list covers the Arizona state electrical exams; the sources we checked don’t list references for the NASCLA electrical exam option.

Prep for the Arizona electrician exam

Our exam prep course, Total Prep and complete bundle for the Arizona electrician exam. Prices are coming soon.

Books for this exam

Renewing your Arizona electrician license

You don’t need any continuing education to renew in Arizona, but your bond has to stay active. Renewal comes every two years. R classes pay $270 plus a $270 Recovery Fund assessment, C classes pay $480, and CR classes pay $380 plus $270. Miss the deadline and you owe a $50 penalty.

Renewal cycle

Every 2 years

CE hours

Not required

Renewal fee

$480–$650

Late penalty

$50

Licensed in another state?

Three states have reciprocity agreements with Arizona. Before you apply, ask the ROC which exams your classification can skip.

California: reciprocity agreement

California is on Arizona’s list of reciprocity states. Ask the ROC what gets waived for electrical classifications.

Nevada: reciprocity agreement

Nevada is on Arizona’s list of reciprocity states. Ask the ROC what gets waived for electrical classifications.

Utah: reciprocity agreement

Utah is on Arizona’s list of reciprocity states. Ask the ROC what gets waived for electrical classifications.

Every other state: no agreement

You apply as a new applicant. Arizona will take the NASCLA electrical exam instead of its own state trade exam.

City and county rules in Arizona

The ROC license lets you contract anywhere in the state. Each job’s permits and inspections still go through the city or county.

State handles

  • R-11, C-11 and CR-11 contractor licenses
  • Trade exams (given by PSI)
  • The Statutes and Rules course with its exam
  • Background check and bond rules

City and county handle

  • Electrical permits
  • Inspections
  • Local business licensing

Who oversees electrical contractors in Arizona

Licensing authority

Arizona Registrar of Contractors

roc.az.gov

What the board does

  • Issues R-11, C-11 and CR-11 licenses and handles their renewal
  • Offers the Statutes and Rules Training Course and Exam
  • Sets bond amounts based on classification and volume
  • Reviews the background check for each person on an application

Arizona electrician license: common questions

Arizona R-11 vs. C-11 vs. CR-11 electrical license: what’s the difference?

An R-11 is for home electrical work, solar included. A C-11 is for commercial electrical work under 600 volts. A CR-11 is the dual license and lets you do both.

How much experience do I need for an Arizona electrical contractor license?

All three classifications call for 4 years of experience, either hands-on or managerial.

Is the Arizona electrical license exam open book?

Yes, for both the NASCLA exam and Arizona’s state exam. Before the test you can tab, highlight and mark up your books. Once the exam starts, you can’t write in them.

Can I take the NASCLA exam instead of the Arizona electrical exam?

Yes. Arizona counts a passing NASCLA electrical score toward its trade exam requirement. The Statutes and Rules course and exam are still on your list, though.

What is the Arizona Statutes and Rules course for contractors?

It replaced the old Statutes and Rules exam. You work through computer-based training on Arizona’s contractor statutes and rules, then take a test, and you can only do it online through the ROC.

Do Arizona electrical contractors need CE to renew?

No. You can renew in Arizona without any continuing education.

Does Arizona offer reciprocity for electrical contractor licenses?

Yes, with Nevada, Utah and California. Ask the ROC what your classification can skip.

How big a bond does an Arizona electrical contractor need?

For an R-11, it’s $4,250 if your annual volume is under $375,000 and $7,500 if it’s higher. A C-11 bond ranges from $2,500 to $50,000 depending on volume. A CR-11 needs the two combined.

Where this information comes from

  1. Arizona Registrar of Contractors, Get a License checklist
  2. PSI, Arizona contractor exam catalog
  3. PSI, Arizona Candidate Information Bulletin
  4. Arizona Registrar of Contractors, Statutes and Rules Training Course and Exam (SRE)
  5. NASCLA Accredited Examination for Electrical Contractors
  6. Arizona Administrative Code, R4-9-130 Schedule of Fees (PDF)
  7. Arizona Revised Statutes, 32-1126 Fees
  8. Arizona Registrar of Contractors, Applying for a License
  9. Arizona Registrar of Contractors, License and Renewal Fees

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Arizona Registrar of Contractors.