Alaska Residential Contractor License: Requirements, Exam and How to Apply, Alaska Residential Contractor License, Alaska, Residential Contractor, Residential Contractor Endorsement, Retake policy, Alaska Division of Corporations, Business & Professional Licensing, how to get a Alaska Residential Contractor License, Alaska Residential Contractor License requirements, Alaska Residential Contractor License exam, Alaska licensing board, Alaska contractor license, license application steps, exam reference books, Residential Endorsement exam, Required, Bond

Home Licenses Residential Contractor License Alaska

Residential Contractor · License & Endorsement

Alaska Residential Contractor License: Requirements, Exam and How to Apply

Planning to build or remodel homes in Alaska? Start here. We cover who needs a residential license versus an endorsement, then walk through the cold climate course, the PSI exam, bonding, insurance and renewal.

Last updated October 27, 2026 from Alaska Division of Corporations, Business & Professional Licensing requirements

Exam time

4 hrs

Open book, given by PSI, with 100 questions

Time to get license

Varies

We couldn’t confirm an experience minimum; you need the course, the exam and the paperwork

Continuing ed

16 hrs

Needed for renewal

Do you need an Alaska residential contractor license?

Yes, if your work in Alaska is building or altering a privately owned home with one to four units. That takes a Residential Contractor license, or a Residential Contractor Endorsement added to a General Contractor license you already hold. For either one, you finish a 16-hour cold climate course and pass an exam.

You need the license when

  • You put up a new privately owned home with 1 to 4 units
  • Your alteration to a home is worth more than 25% of what the structure is worth
  • You already have a General Contractor license and want to bid or do home work (the endorsement)
  • You run a business in Alaska, which means a separate Alaska Business License too

Exceptions

  • If an alteration is worth 25% or less of the structure’s value, it isn’t covered by the residential license definition
  • The residential rule doesn’t cover buildings that aren’t privately owned 1–4 unit homes

Penalties for unlicensed work

We couldn’t confirm specific penalty amounts. Broadly, the state can deny, suspend or discipline a registration and act against anyone contracting without one, so get your license before you bid on home jobs.

How to get an Alaska residential contractor license in 6 steps

  1. Get an Alaska Business License Before you apply
    All licensees need an Alaska Business License, and you apply for it separately from your contractor registration.
  2. Take the cold climate course 16 hrs
    Within the 2 years before you apply, finish the Alaska Craftsman Home Program (or an equivalent) or a postsecondary course in arctic engineering.
  3. Pass the PSI exam Exam day
    Call PSI at 800-733-9267 to book the Residential Endorsement exam. You get 240 minutes for 100 open-book questions, and the pass mark is 70%.
  4. Get your bond and insurance in place Before you apply
    The standalone license calls for three things: general liability insurance, a workers’ comp certificate and a $20,000 bond. You can post that bond as a surety bond, cashier’s check, CD or savings passbook.
  5. Apply with CBPL Before you apply
    Mail your notarized application to the Division of Corporations, Business & Professional Licensing. If you’re applying for the endorsement, include the license number and name of the general contractor it goes on.
  6. Get your license or endorsement After approval
    When CBPL signs off on your application, you’re cleared to bid and build homes in Alaska.

Alaska residential contractor application checklist

Alaska’s application on one page

  • Alaska Business License
  • A cold climate course certificate dated within 2 years
  • A passing score on PSI’s Residential Endorsement exam
  • A notarized, signed application
  • A $20,000 bond and proof of general liability
  • Your workers’ comp worksheet and carrier certificate

Alaska residential contractor license classes

You have two routes to residential work in Alaska. If homes are all you do, go with the standalone license. If you’re already a licensed General Contractor, add the endorsement.

RES Homes only

Residential Contractor

Meant for contractors whose work is limited to building or altering privately owned 1 to 4 unit homes. You meet the endorsement requirements and also carry a bond and insurance.

ExamResidential Endorsement exam
Limit1–4 unit homes

END For existing GCs

Residential Contractor Endorsement

Attaches to your current General Contractor license so your business can bid and do home work as well.

ExamResidential Endorsement exam
LimitLinked to the GC license

Requirements for each Alaska residential contractor class

The training and exam are the same on both paths. On top of that, the standalone license needs a bond, liability insurance and workers’ comp paperwork.

RequirementResidential Contractor licenseResidential Endorsement
Alaska Business LicenseRequiredRequired
Cold climate training16-hr course taken in the last 2 years16-hr course taken in the last 2 years
ExamResidential Endorsement exam (PSI)Residential Endorsement exam (PSI)
ApplicationResidential Contractor Registration Application, notarizedResidential Endorsement Contractor application, notarized
General liability$20K for property, $50K for injury, $100K for multiple injuriesNot stated
Bond$20,000Not stated
Workers’ compA worksheet and your carrier’s certificateNot stated
Linked licenseNot neededThe licensed general contractor’s name and license number

The Alaska residential contractor exam

There’s one exam for the whole residential path: PSI’s Alaska Residential Contractor Endorsement exam. Because it’s open book, you need to know your way around the references as well as the content.

Format

Open book

Questions

100

Passing score

70%

Exam vendor

PSI

Scoring and content

  • 100 questions in 240 minutes; 70% passes
  • Covers plan reading, carpentry, sitework, concrete, masonry, and footings and foundations
  • You’ll also see wood framing, seismic and wind loads, thermal and moisture protection, and advanced cold climate building
  • And: OSHA safety, equipment and tools, general code, and Alaska’s residential endorsement rules
  • The PSI Candidate Information Bulletin lists which references you can bring

Retake policy

  • The sources we checked don’t give retake rules
  • Read the PSI Candidate Information Bulletin before booking
  • To retake or reschedule, call PSI at 800-733-9267
  • You’ll find testing centers in the state’s larger cities

Books and codes for this exam (open book)

The Alaska Residential Contractor Endorsement exam is open book, and most of the references below can be tabbed, highlighted and brought into the test. The rest are for studying only and aren’t allowed in the room.

ReferenceEditionHow it’s used
International Residential Code for One- and Two-Family Dwellings (IRC)2018Allowed in exam
Wood Design Package2018Allowed in exam
Northern Comfort: Advanced Cold Climate Home Building TechniquesNot statedAllowed in exam
OSHA 1926: Construction Industry RegulationsNot statedAllowed in exam
Alaska Centralized Licensing RegulationsNot statedAllowed in exam
Alaska Centralized Licensing StatutesNot statedAllowed in exam
Alaska Construction Contractor Statutes and RegulationsNot statedAllowed in exam
Building Component Safety Information (BCSI)Not statedStudy only
Carpentry and Building Construction, Student Edition2016Study only
Contractor’s Guide to Quality Concrete Construction4th editionStudy only
Modern MasonryNot statedStudy only
Roofing Construction & EstimatingRevisedStudy only

The Alaska statutes and regulations are free state publications you print and bring to the exam.

Prep for the Alaska residential contractor exam

Our exam prep course, Total Prep and complete bundle for the Alaska residential contractor exam. Prices are coming soon.

Books for this exam

Renewing your Alaska residential contractor license

You renew your registration or endorsement every two years for $250, and there’s no grace period once it lapses. Renewal takes 16 hours of continuing education. Your bond, insurance and Alaska Business License also need to stay current.

Renewal cycle

2 years

CE hours

16

Renewal fee

$250

Late penalty

Not stated

Licensed in another state?

There are no reciprocity agreements for this license in Alaska.

No reciprocity agreements

Hold a license elsewhere? You still apply as a new applicant. Take the cold climate course, pass the PSI exam, and meet the bond and insurance rules.

City and county rules in Alaska

The state handles your contractor registration. Where a city or borough has a building department, it still runs permits and inspections.

State handles

  • Residential endorsements and contractor licenses
  • Alaska Business Licenses
  • Keeping your bond and insurance on file
  • Exams (given by PSI)

City and county handle

  • Permits and inspections, in places with a local building department
  • Local business registration, if required

Who oversees residential contractors in Alaska

Licensing authority

Alaska Division of Corporations, Business & Professional Licensing

907-465-8443

commerce.alaska.gov construction contractors

What the board does

  • Issues residential endorsements and registers residential contractors
  • Holds your bond, insurance and workers’ comp filings
  • Sets the exam and cold climate training rules
  • Manages renewals and CE

Alaska residential contractor license: common questions

Do I need an Alaska contractor license to remodel a house?

On a privately owned 1 to 4 unit home, yes, when the alteration is worth more than 25% of what the structure is worth. You’d need a Residential Endorsement or a Residential Contractor license.

Alaska residential contractor license vs. endorsement: what’s the difference?

If your business works only on homes, you get the Residential Contractor license. If you already hold a General Contractor license, the endorsement goes on it and lets you take on home work too.

What is Alaska’s 16-hour cold climate course for residential contractors?

You can take the Alaska Craftsman Home Program (or an equivalent) or a postsecondary arctic engineering course. Either way, finish it no more than 2 years before you apply.

Is the Alaska residential contractor exam open book?

Yes. PSI gives you 240 minutes for 100 questions, and 70% passes. Check the PSI Candidate Information Bulletin for the references you’re allowed to use.

How much is the bond for an Alaska residential contractor license?

It’s $20,000. You can post a surety bond or a cashier’s check, or use a savings passbook or time certificate of deposit.

Does Alaska accept an out-of-state residential contractor license?

No. This license has no reciprocity agreements in Alaska, so you go through the process as a new applicant.

Do Alaska residential contractors need continuing education?

Yes. Renewal takes 16 hours of CE.

Where this information comes from

  1. Alaska CBPL, Construction Contractors program
  2. PSI, Alaska Residential Endorsement Candidate Information Bulletin (PDF)
  3. Alaska Construction Contractor Statutes and Regulations (PDF)
  4. Alaska Centralized Licensing Statutes (PDF)
  5. Alaska Centralized Licensing Regulations (PDF)
  6. PSI, exam scheduling
  7. Alaska CBPL, Contractor Residential Endorsement Application (PDF)
  8. Alaska CBPL, General Contractor with Residential Endorsement Application (PDF)
  9. Alaska CBPL, Residential Contractor Endorsement Renewal Application (PDF)
  10. Alaska CBPL, Business License New Application (PDF)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Alaska Division of Corporations, Business & Professional Licensing.