
Home Licenses Mold Remediation License Texas
Mold Remediation License · Contractor
Texas Mold Remediation License: Requirements, Exam and How to Apply
In Texas, the state licenses mold remediation contractors. Here you’ll find the education and experience routes, the required course, insurance, the PSI exam and how renewal works.
Last updated October 28, 2026 from Texas Department of Licensing and Regulation requirements
Exam time
145 min
Closed book, 100 questions
Time to get license
1–5 yrs
How much experience you need depends on your education
Continuing ed
8 hrs
Every 2-year renewal
Do you need a Texas mold remediation license?
It is. Only a few states license mold remediation statewide, and Texas is one, so you need a Mold Remediation Contractor license before you do or contract for any mold remediation work.
You need the license when
- You do mold remediation work in Texas
- You bid on or sign contracts for mold remediation work for other people
- You advertise yourself or present yourself as a mold remediation contractor
Exceptions
- We couldn’t confirm any exemptions for the Texas license
- Before counting on an exemption for small jobs or work you do as the owner, ask the state
Penalties for working unlicensed
We couldn’t confirm specific penalties. The state can act against anyone doing licensed mold work without a license, so be licensed before you accept jobs.
How to get a Texas mold remediation license in 6 steps
- Find your qualifying route Before you start
Figure out which route your schooling puts you on. With a degree or professional certification, you need 1 year of experience. With 60 college credit hours, you need 3 years. With a GED or high school diploma, you need 5 years. - Take the initial course Before you apply
Complete an initial mold remediation contractor course approved by the department, and save the certificate of completion. - Set up insurance and a background check Before you apply
Get general liability coverage of $1 million or more and finish the required background check. - Get pre-approved for the exam Online application
Apply on the state’s website. Once you’re approved, a Candidate Eligibility letter arrives with a PSI registration form and instructions for scheduling. - Take the exam through PSI Exam day
Book it with PSI at 833-333-4741. You get 145 minutes for 100 questions, it’s closed book, and 70% is a passing score. - Receive your license After you pass
After PSI reports your results to the state, the state reaches out with your license information.
Texas mold remediation application checklist
Your one-page Texas checklist
- Proof of education (a degree, credit hours, diploma or certification)
- Records of hands-on experience for your route
- A certificate from an approved initial mold remediation course
- General liability coverage of $1 million or more
- A finished background check
- Exam pre-approval, followed by a passing PSI score
The Texas mold remediation license
There’s a single license here: Mold Remediation Contractor. Your education determines how much experience you need.
MRC Contractor
Mold Remediation Contractor
For anyone doing mold remediation work in Texas. You’ll need an approved initial course, qualifying education and experience, insurance, and a passing state exam.
| Exam | Mold Remediation Contractor exam |
| Limit | Not stated |
Texas mold remediation license requirements
You meet one education and experience route. The rest, from the course through the exam, is identical for every applicant.
| Requirement | Degree or professional certification | 60 college credit hours | High school diploma or GED |
|---|---|---|---|
| Education | Either a certification (certified industrial hygienist, PE, registered sanitarian, certified safety professional or registered architect) or a bachelor’s or graduate degree in one of these: natural or physical science, engineering, architecture, building construction, building science | 60 credit hours in a natural, physical, environmental or building science (or a related subject), each passed with at least a C | A GED or high school diploma |
| Experience | 1 year of hands-on work as a general contractor or in an allied field | 3 years of hands-on work as a general contractor or in an allied field | 5 years of hands-on work as a general contractor or in an allied field |
| Initial course | An approved mold remediation contractor course | An approved mold remediation contractor course | An approved mold remediation contractor course |
| General liability | $1 million minimum | $1 million minimum | $1 million minimum |
| Background check | Required | Required | Required |
| Minimum age | 18 | 18 | 18 |
The Texas mold remediation exam
There’s just one state exam for Texas mold remediation contractors. You can’t bring references in, so you need to know the material well.
Format
Closed book
Questions
100
Passing score
70%
Exam vendor
PSI
Scoring & content
- 145 minutes, 100 questions
- Texas rules and regulations; health and safety
- Fungal biology and exposure in indoor environments
- Mold remediation principles and techniques; tools, equipment and materials
- Documentation and administrative procedures; clearance criteria and post-remediation verification
Retake policy
- We couldn’t confirm the retake rules
- You can’t schedule until the state pre-approves you
- Call PSI at 833-333-4741 about retakes and rescheduling
- You’ll find testing centers in the bigger cities around Texas
Books and codes for this exam (closed book)
The Texas mold exams are closed book and share one reference list for study. The list changes on January 1, 2027: Bioaerosols drops off and the NIOSH Dampness and Mold Assessment Tool is added.
| Reference | Edition | How it’s used |
|---|---|---|
| Bioaerosols: Assessment and Control (American Conference of Governmental Industrial Hygienists); dropped as a reference effective January 1, 2027 | 1999 | Study only |
| Dampness and Mold Assessment Tool: General Buildings (CDC/NIOSH Pub. 2019-115); becomes a reference effective January 1, 2027 | Not stated | Study only |
| Certificate of Mold Damage Remediation (Texas Department of Insurance form) | Not stated | Study only |
| Consumer Mold Information Sheet (CMIS) (TDLR) | Not stated | Study only |
| NIOSH Method 800 (CDC/NIOSH) | Not stated | Study only |
| Preventing Occupational Respiratory Disease from Exposure to Dampness in Buildings (CDC/NIOSH Pub. 2013-102) | Not stated | Study only |
| OSHA regulations, sections 1910.132, 1910.134, 1910.146, 1910.147, 1926.1053 | Not stated | Study only |
| IICRC R520 Reference Guide for Professional Mold Remediation (Institute of Inspection, Cleaning and Restoration Certification) | R520-2015, Third edition | Study only |
| ANSI/IICRC S520 Standard for Professional Mold Remediation (IICRC) | S520-2024, Fourth edition | Study only |
| ANSI/IICRC S500 Standard and Reference Guide for Professional Water Damage Restoration (IICRC) | 2021, Fifth edition | Study only |
| Mold Assessors and Remediators Administrative Rules, 16 Texas Administrative Code Chapter 78 (TDLR) | Not stated | Study only |
| Mold Assessors and Remediators, Texas Occupations Code Chapter 1958 | Not stated | Study only |
| Procedural Rules of the Commission and the Department, 16 Texas Administrative Code Chapter 60 (TDLR) | Not stated | Study only |
| TDLR Potential Health Effects of Mold Exposure in Buildings (training module) | Not stated | Study only |
Prep for the Texas mold remediation exam
Our exam prep course and complete bundle for the Texas mold remediation exam. Prices are coming soon.
Renewing your Texas mold remediation license
A Texas mold remediation license runs for 2 years. In each renewal cycle, finish 8 hours or more of continuing education.
Renewal cycle
Every 2 years
CE hours
8
Renewal fee
Not stated
Late penalty
Not stated
Licensed in another state?
We couldn’t confirm any reciprocity for the mold remediation license in Texas.
No reciprocity deals
We couldn’t find any, so expect to apply as a new applicant, finish the approved course and pass the Texas exam.
City and county rules in Texas
In Texas, the state licenses mold remediation. The usual permits and business rules are still up to cities and counties.
State handles
- Licensing and renewing mold remediation contractors
- Exam pre-approval and results through PSI
- Approving initial and continuing education courses
Handled by cities & counties
- Building permits and inspections when a job requires them
- Local rules for registering a business
Who oversees mold remediators in Texas
Licensing authority
Texas Department of Licensing and Regulation
Exam scheduling (PSI): 833-333-4741
What the board does
- Grants and renews mold remediation contractor licenses
- Pre-approves people to take the state exam
- Approves continuing education and initial training courses
- Reviews insurance and background checks
Texas mold remediation license: common questions
Is a license required for mold remediation in Texas?
It is. Texas licenses mold remediation statewide, so get your Mold Remediation Contractor license before you take on the work.
How much experience do you need for a Texas mold remediation license?
Your schooling decides it. A qualifying degree or professional certification calls for 1 year; 60 college credit hours call for 3 years; a GED or high school diploma calls for 5 years.
Can you use books on the Texas mold remediation exam?
No, you can’t. It’s closed book, with 100 questions and 145 minutes, and 70% passes.
Who administers the Texas mold remediation exam?
You test with PSI. First the state has to pre-approve you, and then a Candidate Eligibility letter arrives with a PSI registration form.
How much insurance does a Texas mold remediation license require?
You need general liability coverage of $1 million or more.
How often do you renew a Texas mold remediation license?
You renew every 2 years and need 8 hours or more of continuing education in each renewal cycle.
Where this information comes from
- Texas Department of Licensing and Regulation, mold remediation contractor requirements
- PSI, Texas Mold Remediation Contractor exam information
Last updated October 28, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Texas Department of Licensing and Regulation.
