Oregon Code Official License: Requirements, Exam and How to Apply, Oregon Code Official License, Oregon, Residential Electrical & Electrical Specialty Code Inspector, Residential Plumbing & Plumbing Specialty Code Inspector, Mechanical Inspector A-Level, Residential Plans Examiner & Structural Inspector, Structural Plans Examiner & Structural Inspector, Fire and Life Safety Plans Examiner, Building Official, Oregon Building Codes Division (Department of Consumer and Business Services), how to get a Oregon Code Official License, Oregon licensing board, EI

Home Licenses Code Official License Oregon

Code Official · Inspectors, Plans Examiners & Building Officials

Oregon Code Official License: Requirements, Exam and How to Apply

This page covers every Oregon certification for inspectors, plans examiners and building officials: who can qualify, which exams are accepted, how ICC and other national certifications convert, and what renewal involves.

Last updated October 28, 2026 from Oregon Building Codes Division requirements

Exam time

2–4 hrs

Varies by exam: NFPA CFPE runs 4 hrs, ICC M2 and R3 run 2 hrs

Time to get license

Varies

Some classes take up to 2–4 yrs as a journey-level plumber or electrician

Continuing ed

Code change courses

Needed whenever codes change, along with any high-priority training

Do you need an Oregon code official license?

Yes. Inspecting work or reviewing plans under any of Oregon’s specialty codes takes the matching state certification from the Building Codes Division. You earn some classes through a division course or exam, and others convert directly from a national certification such as NFPA, IAPMO or ICC.

You need the license when

  • Your job is checking plumbing or electrical installations, whether under the residential code or the state’s Electrical or Plumbing Specialty Codes
  • Your work involves plan review or inspection under the Oregon Mechanical Specialty Code
  • You check commercial or residential construction plans under the Oregon Structural or Residential Specialty Codes
  • You handle fire and life safety plan review under OSSC 107.3.5
  • A municipality has appointed you as its building official or assistant building official

Exceptions

  • Without a separate structural certification, Electrical Specialty Code Inspectors and residential electrical inspectors can inspect both the electrical and structural sides of solar PV systems up to 25 kW
  • Your plumbing certification lets you inspect solar water heating systems with up to 180 gallons of storage
  • When a code barely changed, the division may waive the code change course

Working without the correct certification

We couldn’t confirm any fines. The Building Codes Division certifies plans examiners and inspectors, and under each specialty code only certified people can do plan reviews and inspections. Working beyond your certification can put both your job and your jurisdiction’s program at risk.

How to get an Oregon code official license in 6 steps

  1. Choose the certification for your job Before you start
    Line up the work you’ll be doing with a class: residential or full-scope plumbing or electrical, mechanical, commercial or residential structural, fire and life safety plan review, or building official.
  2. Confirm your experience route Before you apply
    Plumbing and electrical classes take engineering, inspection or journey-level experience. To be a building official, you have to be appointed by a municipality or in talks for the job.
  3. Take the division course or exam Exam day
    For CAE, EI, CAP, PI, CAX and CAS, start the division course or exam by calling the Oregon Inspector Training Program at 503-373-7974. Building official candidates finish the required course and its exam.
  4. Or get the national certification Exam day
    Six classes (MIA, CAX, CAS, PEA, SIA and FLS) let you qualify by passing an approved exam from NFPA, IAPMO or ICC. You can use your books on ICC exams like M2, R3 and F3.
  5. Apply to the division Before you start work
    Most people send in the certification application along with the fee. If you’re converting a national cert, file the conversion application instead.
  6. Stay current Every 3 years
    Renew on the three-year cycle (2023, 2026, 2029), and finish any high-priority training and code change courses the division calls for.

Oregon code official application checklist

Oregon’s application on one page

  • Your class (building official, fire plans examiner, SIA, PEA, CAS, CAX, MIA, PI, CAP, EI or CAE)
  • Proof of your experience, apprenticeship or engineering credentials
  • A passing division or course exam score, or your national certification
  • Form 2521 (Application for Certification) or form 5116 (National Certification Conversion Application)
  • The application fee
  • Proof you’ve been appointed or are negotiating with a municipality (building official only)

Oregon code official license classes

Oregon certifies plans examiners and inspectors by level and by code. You get the residential plumbing and electrical classes through division training or exams. The mechanical, structural and fire plans examiner classes convert from an approved national certification.

CAE / EI Electrical

Residential Electrical & Electrical Specialty Code Inspector

CAE is for electrical work in manufactured dwellings and 1- and 2-family dwellings. EI covers electrical plan reviews and everything under the Oregon Electrical Specialty Code. Solar PV up to 25 kW is included in both.

ExamDivision exam or course exam for CAE and EI
LimitAll electrical (EI) or residential (CAE)

CAP / PI Plumbing

Residential Plumbing & Plumbing Specialty Code Inspector

CAP is for plumbing in manufactured dwellings and 1- and 2-family dwellings. PI covers plumbing plan reviews and everything under the Oregon Plumbing Specialty Code. Solar water heating up to 180 gallons is included in both.

ExamPI division exam; CAP division exam or course exam
LimitAll plumbing (PI) or residential (CAP)

MIA National cert

Mechanical Inspector A-Level

Plan reviews and construction inspections for everything under the Oregon Mechanical Specialty Code.

ExamICC M2 or IAPMO MI
LimitAll mechanical work

CAX / CAS Residential

Residential Plans Examiner & Structural Inspector

Structural and mechanical inspections plus plan review for camps, manufactured dwellings and parks, and 1- and 2-family dwellings.

ExamDivision course, ICC R3 (CAX), or ICC B1 or B5 (CAS)
LimitResidential code work

PEA / SIA Commercial

Structural Plans Examiner & Structural Inspector

Inspections and A-level plan review for everything under the Oregon Structural Specialty Code. State fire and life safety reviews aren’t part of the plans examiner’s scope.

ExamICC B3 (PEA), ICC B2 or B5 (SIA)
LimitAll structural code work

FLS Plan review

Fire and Life Safety Plans Examiner

Focuses on fire and life safety: you review plans against those sections of the state’s structural code (OSSC 107.3.5).

ExamICC F3 or NFPA CFPE
LimitFire and life safety review

BO Appointed

Building Official

Leads a local building program, covering code enforcement, inspections, permits and plan review. Only people a municipality has appointed, or is in the process of hiring, can get it.

ExamBuilding Official course exam
LimitMunicipal appointment

Requirements for each Oregon code official class

The main difference is how you qualify. Plumbing and electrical classes take inspection or trade experience plus a division exam. Most of the other classes convert from a national certification.

RequirementElectrical & plumbing (CAE, EI, CAP, PI)National-cert classes (MIA, CAX, CAS, PEA, SIA, FLS)Building Official
Way to qualifyA division exam, or a division course followed by its course exam (CAE, CAP, EI)You turn an approved national certification into the Oregon one; CAX and CAS can also be earned through a division courseRequired division course and its course exam
ExperienceEngineering, inspection experience or journey-level plumber or electrician experience (2–8 yrs depending on route)We couldn’t confirm anything beyond holding the national certificationAppointed and employed by a municipality, or in talks for the job
ExamDivision exam for CAE, EI, CAP or PIICC M2, R3, B1, B2, B3, B5 or F3, NFPA CFPE or IAPMO MIThe Building Official Certification course exam
ApplicationForm 2521, the Application for CertificationForm 5116, the National Certification Conversion ApplicationHandled by the Oregon Inspector Training Program
PracticumA board-approved practicum on certain routesNot statedNot stated
RenewalEvery 3 yearsEvery 3 yearsEvery 3 years

The Oregon code official exam

Your exam depends on your class. Plumbing and electrical classes use Oregon division exams, and those don’t have published bulletins. The mechanical, structural and fire plans examiner classes use national exams from NFPA, IAPMO or ICC.

Format

Open book (ICC exams)

Questions

50–100

Passing score

75 (ICC), 70% (IAPMO)

Exam vendor

ICC, IAPMO, NFPA or the division

Scoring and content

  • ICC M2 Commercial Mechanical Inspector: open book, 2 hours, 50 questions, 75 to pass
  • IAPMO MI Mechanical Inspector: 3 hours, 100 questions, 70% to pass
  • ICC R3 Residential Plans Examiner: open book, 2 hours, 60 questions, 75 to pass
  • ICC B3 Building Plans Examiner: open book, 3.5 hours, 80 questions, 75 to pass
  • ICC F3 Fire Plans Examiner: open book, 3.5 hours, 60 questions, 75 to pass. NFPA CFPE: 4 hours, 100 questions, drawn from Chapter 7 of NFPA 1031 (2014)

Retakes

  • We couldn’t confirm the retake rules
  • For ICC exams, call ICC at 888-422-7233
  • For IAPMO MI, call IAPMO at 708-995-3019
  • For NFPA CFPE, call NFPA at 800-344-3555
  • For division and course exams, call the Oregon Inspector Training Program at 503-373-7974

Books and codes for this exam (varies)

The ICC national exams Oregon accepts for these certifications (R3, B1, B3, F3 and M2) are open book, and the books listed for the ICC B1 Residential Building Inspector exam are the ones you bring into the test. The sources we checked don’t publish a reference list for Oregon’s own division and course exams (Building Official, CAE/EI, CAP/PI, CAX/CAS), so check with the Oregon Inspector Training Program before you buy books for those.

ReferenceEditionHow it’s used
International Residential Code (IRC) — ICC B1 Residential Building Inspector exam2021Allowed in exam
International Residential Code (IRC) — ICC B1 Residential Building Inspector exam2024Allowed in exam
NFPA 1031: Standard for Professional Qualifications for Fire Inspector and Plan Examiner (Chapter 7) — NFPA CFPE Certified Fire Plan Examiner exam2014Not stated

The IRC is listed in both the 2021 and 2024 editions, so confirm which edition your exam is currently based on with ICC before you buy.

Prep for the Oregon code official exam

Our exam prep course, Total Prep and complete bundle for the Oregon code official exam. Prices are coming soon.

Books for this exam

Renewing your Oregon code official license

Oregon code official certifications are renewed every three years on a set cycle (2023, 2026, 2029). In between, you take code change courses whenever the codes change, plus any high-priority training the division calls for.

Renewal cycle

Every 3 years

CE hours

Not stated

Renewal fee

Not stated

Late penalty

Not stated

Licensed in another state?

Oregon has no state-to-state reciprocity listed for code officials. What it does instead is convert approved national certifications and, for plumbing and electrical classes, count trade and inspection experience from other states.

Any state: a national certification in place of the Oregon exam

If you hold ICC M2, R3, B1, B2, B3, B5 or F3, NFPA CFPE or IAPMO MI, file the National Certification Conversion Application for the Oregon class that matches.

Plumbers and electricians from other states: experience counts

For PI and EI, you can qualify with an equivalent apprenticeship and 4 years of commercial journey-level work, or with 8 years and a practicum.

Inspectors from other states: experience counts

For PI and EI, you can qualify with 10 years of inspecting (5 commercial) and a national certification, or with 8 years (4 commercial) and a practicum. For CAE, 2 years as an electrical inspector in another jurisdiction is accepted.

City and county rules in Oregon

Every inspector, plans examiner and building official is certified by the state. Counties and cities do the hiring and appointing and run local permit and inspection programs.

What the state handles

  • Certifications for inspectors and plans examiners
  • Division training and exams, run by the Oregon Inspector Training Program
  • Converting national certifications
  • 3-year renewals and code change courses

What cities and counties handle

  • Hiring plans examiners and inspectors
  • Appointing building officials and their assistants
  • Inspections, permits and plan review
  • Code enforcement at the local level

Who oversees Oregon code officials

Licensing authority

Oregon Building Codes Division (Department of Consumer and Business Services)

National certifications: 503-373-1268 · Inspector Training Program: 503-373-7974

oregon.gov/bcd

What the board does

  • Certifies building officials, plans examiners and inspectors
  • Runs division training and exams through the Oregon Inspector Training Program
  • Converts approved NFPA, IAPMO and ICC certifications
  • Decides the requirements for code change courses and high-priority training

Oregon code official license: common questions

Does Oregon accept ICC certifications for code official certification?

Yes, for a lot of classes. You can convert ICC M2, R3, B1, B2, B3, B5 and F3 to Oregon certifications by filing the National Certification Conversion Application.

How do you become a residential electrical inspector in Oregon?

You can qualify with inspection experience, electrical engineering education, an equivalent apprenticeship or Oregon journey-level electrician experience. After that, pass the CAE division exam, or complete the CAE course and its exam.

Which exam does the Oregon Mechanical Inspector A-Level certification require?

You can use IAPMO MI Mechanical Inspector (3 hours, 100 questions, 70% to pass) or ICC M2 Commercial Mechanical Inspector (open book, 2 hours, 50 questions).

Can anyone get an Oregon building official certification?

No. Only people a municipality has appointed to building official duties, or who are in talks with one about the job, can take the Building Official course.

How often do Oregon inspector certifications renew?

Once every three years on a set cycle (2023, 2026, 2029 and onward). When the division requires them, you also take code change courses.

Which Oregon certification covers fire plan review?

That’s the Fire and Life Safety Plans Examiner. To qualify, you need NFPA Certified Fire Plan Examiner (CFPE) or ICC F3 Fire Plans Examiner.

Are Oregon code official division exams open book?

We couldn’t confirm it, and there are no published bulletins for the division course exams. The ICC national exams on this page are open book.

Where this information comes from

  1. Oregon Building Codes Division
  2. Building Codes Division, National certifications
  3. Oregon Inspector Training Program
  4. Building Codes Division, Application for Certification, form 2521 (PDF)
  5. Building Codes Division, National Certification Conversion Application, form 5116 (PDF)
  6. OAR chapter 918 (divisions 282, 311, 500, 695 and 780)

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Oregon Building Codes Division.