Ohio Code Official License: Requirements, Exam and How to Apply, Ohio Code Official License, Ohio, Building official, Building plans examiner, Building inspector, Electrical safety inspector, Electrical plans examiner, Mechanical inspector & plans examiner, Plumbing inspector & plans examiner, Fire protection inspector, Ohio Board of Building Standards, how to get a Ohio Code Official License, Ohio Code Official License requirements, Ohio Code Official License exam, Ohio licensing board, Ohio contractor license, license application steps, Building plans

Home Licenses Code Official License Ohio

Code Official License · Officials, Inspectors & Plans Examiners

Ohio Code Official License: Requirements, Exam and How to Apply

In Ohio, the Board of Building Standards certifies plans examiners, inspectors and building officials. Here you’ll find each class, the experience it calls for, the NCPCCI and ICC exams, and what it takes to keep your certification.

Last updated October 28, 2026 from Ohio Board of Building Standards requirements

Exam time

2 hrs

For each NCPCCI exam; ICC B2 takes 3.5 hrs

Time to get license

4–10 yrs

Experience needed, based on your class and route

Continuing ed

30 hrs

For each 3-year renewal cycle

Do you need an Ohio code official license?

Yes, if your job in Ohio is reviewing plans or inspecting work for code compliance. Each code enforcement role is certified on its own by the Ohio Board of Building Standards, which is part of the Division of Industrial Compliance in the Department of Commerce. You qualify through years of experience and then pass the ICC or NCPCCI exams that go with the role.

You need the license when

  • You lead a building department as its building official
  • As a plans examiner, your job is checking plans for building, electrical, mechanical or plumbing work
  • As an inspector, you go out and check building, electrical, mechanical, plumbing or fire protection work
  • You’re a plumbing inspector for a county board of health or the state

Exceptions

  • Trade contractors doing the installation have their own licenses and don’t need code official certification
  • You only need the certification for the job you actually hold, not all of them
  • For several classes, Ohio-registered professional engineers and architects can count their registration as qualifying experience

Working uncertified

We couldn’t confirm specific fines. Because the Board of Building Standards decides who gets certified, doing code enforcement work without the correct certification can cost you certification or renewal. Talk to the Board before you start.

How to get an Ohio code official license in 5 steps

  1. Choose a certification Before you start
    Figure out the role you want (inspector, plans examiner or building official) and the trade. Every combination has its own exams and experience routes.
  2. Get qualifying experience 4–10 yrs
    Expect 5 years in the trade or a certified building department for most routes, and 10 for a few. For several classes, registration as an Ohio architect or engineer counts.
  3. Pass the exams Exam day
    Sign up with whichever testing agency you like. NCPCCI exams are open book, with 50 questions in 2 hours, and the ones that list a score require 70%. Most classes also offer ICC exams.
  4. Apply to the Board of Building Standards Application
    File your certification application with the Ohio Board of Building Standards. For questions on fees and forms, call 614-466-3636.
  5. Stay certified Every 3 years
    Each 3-year cycle, renew and finish 30 hours of continuing education.

Ohio code official application checklist

Ohio’s application on one page

  • Choose a role and a trade
  • Proof of your qualifying experience (or Ohio architect or PE registration)
  • Passing NCPCCI or ICC exam results for your class
  • An application to the Ohio Board of Building Standards
  • Budget for 30 hours of CE every 3 years

Ohio code official license classes

Ohio divides code enforcement by trade into building officials, plans examiners and inspectors. Every class has its own exams and experience routes, and many of them let you choose between an NCPCCI exam and the matching ICC exam.

BO Top role

Building official

Leads the building department: enforces the code, oversees inspections, issues permits and reviews plans.

ExamICC MM + MG + BC
LimitResidential and commercial

BPE Plan review

Building plans examiner

Checks electrical, mechanical, fire protection, structural and architectural plans against the Ohio Building Code.

ExamNCPCCI 1C or ICC B3
LimitBuilding plans

BI Most common

Building inspector

Checks buildings being built, renovated or altered for accessibility, fire safety and structure.

ExamNCPCCI 1B, 3B, 4B / ICC B2, M2
LimitField inspections

ESI Electrical

Electrical safety inspector

Checks electrical installations in homes, businesses and industrial buildings.

ExamNCPCCI 2B or ICC E2
LimitElectrical work

EPE Electrical

Electrical plans examiner

Looks over electrical plans and specifications and approves them before any installation starts.

ExamNCPCCI 2C or ICC E3
LimitElectrical plans

MECH HVAC

Mechanical inspector & plans examiner

Checks or reviews boilers, ductwork, HVAC, piping and fuel gas systems under the Ohio Mechanical Code.

ExamInspector: 4B or M2. Plans: 4C or M3
LimitMechanical systems

PLB Plumbing

Plumbing inspector & plans examiner

Checks or reviews drainage systems, water heaters, fixtures and piping under the Ohio Plumbing Code.

ExamInspector: 5B or P2. Plans: 5C or P3
LimitPlumbing systems

FPI Fire

Fire protection inspector

Checks fire protection systems (fire alarms, sprinklers and the like) along with building structure.

ExamNCPCCI 3B/3C + 1B
LimitFire protection

Requirements for each Ohio code official class

Each row lists options, and you only need one experience route. For building official, you need the ICC MM, MG and BC modules plus one of these: 5 years in non-residential design as an Ohio-registered architect or engineer, 10 years as a superintendent or general contractor, or 5 years as a residential building official.

RequirementPlans examinerInspector
Experience: buildingOhio architect or PE registration, 5 yrs as a building inspector, or 10 yrs in structural trades5 yrs in concrete, steel, masonry or carpentry, or 5 yrs in a listed code enforcement role
Exams: buildingNCPCCI 1C or ICC B3NCPCCI 1B, 3B, 4B / ICC B2, M2
Experience: electricalOhio architect or PE registration, 5 yrs as an ESI, 5 yrs of design as an architect or PE, or 10 yrs as a journeyman electricianAn Ohio-registered electrical engineer, 6 yrs as a journeyman, 4 yrs as an ESI trainee, or a mix of journeyman and trainee time
Exams: electricalNCPCCI 2C or ICC E3NCPCCI 2B or ICC E2
Experience: mechanicalOhio architect or PE registration, 5 yrs as a mechanical or building inspector, 5 yrs in a residential code role, or 10 yrs as an HVAC tradesman5 yrs in a listed code enforcement role, or 5 yrs as an HVAC tradesman
Exams: mechanicalNCPCCI 4C or ICC M3NCPCCI 4B or ICC M2
Experience: plumbingOhio architect or PE registration, 5 yrs as a plumbing inspector, or 10 yrs as a journeyman plumber7 yrs of plumbing installation, or an architecture or engineering degree with 3 yrs of plumbing design
Exams: plumbingNCPCCI 5C or ICC P3NCPCCI 5B or ICC P2

The Ohio code official exam

For most classes Ohio takes NCPCCI exams, and for many of those same roles it also takes ICC exams. Since NCPCCI exams are open book, knowing how to use your code books counts as much as knowing the content.

Format

Open book

Questions

50 (NCPCCI)

Passing score

70% (NCPCCI)

Exam vendor

PSI, NCPCCI, ICC

Scoring and content

  • NCPCCI exams (1B, 2A, 2B, 3B/3C, 4A, 4B, 5B): open book, 2 hours, 50 questions
  • 2A, 3B/3C and 4A need 70% to pass; we couldn’t confirm scores for the others
  • 2B and 4B are general exams; 2A and 4A cover one- and two-family dwellings
  • ICC BC Building Codes and Standards: 80 questions; MM Management module: 75 questions
  • ICC B2 Commercial Building Inspector: runs 3.5 hours

Retakes

  • The requirements we checked don’t cover retake rules
  • Book through whichever testing agency you pick
  • Before booking, look up retake fees and waiting periods in that agency’s candidate bulletin

Books and codes for this exam (open book)

The NCPCCI inspector exams (1B Building, 2A Electrical, 3B/3C Fire Protection, 4A Mechanical and 5B Plumbing) are open book, so you can bring the approved code books into the testing room. The list below covers the building, electrical, fire protection and mechanical inspector exams.

ReferenceEditionHow it’s used
International Residential Code (IRC) — 1A Residential Building, 2A/2B Electrical and 4A/4B Mechanical exams2021Allowed in exam
International Building Code (IBC) — 1B Building and 3B/3C Fire Protection exams2021Allowed in exam
International Mechanical Code (IMC) — 4B Mechanical exam2021Allowed in exam
International Fuel Gas Code (IFGC) — 4B Mechanical exam2021Allowed in exam
NFPA 13: Standard for the Installation of Sprinkler Systems — 3B/3C Fire Protection exam2019Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code — 3B/3C Fire Protection exam2019Allowed in exam
NFPA 70: National Electrical Code (NEC) — 2A/2B Electrical exams2020Allowed in exam

The sources we checked also list 2018 editions of the IRC, IMC and IFGC for the mechanical exams and don’t name a plumbing code for the 5B/5C plumbing exams, so confirm editions in the NCPCCI candidate bulletin.

Prep for the Ohio code official exam

Our exam prep course, Total Prep and complete bundle for the Ohio code official exam. Prices are coming soon.

Books for this exam

Renewing your Ohio code official license

You renew an Ohio code official certification every 3 years, and each cycle takes 30 hours of continuing education.

Renewal cycle

Every 3 years

CE hours

30

Renewal fee

Not stated

Late penalty

Not stated

Ohio code official CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

We couldn’t confirm any reciprocity for Ohio code official certifications.

No reciprocity agreements on record

Since none are on record, expect to apply as a new candidate and meet Ohio’s exam and experience requirements. The ICC exams listed here are national, so ask the Board if results you’ve already passed can count.

City and county rules in Ohio

The state issues your certification, but your employer will be a certified building department, the Division of Industrial Compliance or, for plumbing, a county board of health.

What the state handles

  • Certifying inspectors, plans examiners and officials
  • The exam and experience rules for every class
  • 3-year renewals and the 30-hour CE rule
  • State inspectors who work for the Division of Industrial Compliance

What cities and counties handle

  • Certified building departments, which hire plans examiners, inspectors and officials
  • Inspections, plan review and permits for local projects
  • County boards of health, which employ plumbing inspectors

Who oversees Ohio code officials

Licensing authority

Ohio Board of Building Standards

Ohio Department of Commerce, Division of Industrial Compliance

614-466-3636

com.ohio.gov Board of Building Standards

What the board does

  • Certifies plans examiners, inspectors and building officials
  • Decides the exam and experience rules for each class
  • Certifies the building departments where code officials work
  • Handles renewals and enforces the CE requirement

Ohio code official license: common questions

Who certifies Ohio building inspectors and code officials?

The Ohio Board of Building Standards does. It’s part of the Division of Industrial Compliance within the Department of Commerce, and its number is 614-466-3636.

Does Ohio use ICC exams for code official certification?

Yes, for a lot of classes. Building officials take ICC modules MM, MG and BC. Most plans examiner and inspector classes let you pick an NCPCCI exam or the matching ICC exam, like B2, E2, M2 or P2.

How much experience does an Ohio building inspector certification require?

You need five years in concrete work, steel erection, masonry or structural carpentry, or five years in a listed code enforcement job such as residential building inspector.

Are Ohio code inspector exams open book?

Yes. NCPCCI exams are open book and give you 2 hours for 50 questions. Where a score is listed, it’s 70% to pass.

Can an architect or engineer become an Ohio plans examiner?

Yes. Being registered in Ohio as a professional engineer or architect is a qualifying route for plans examiner in building, electrical, mechanical and plumbing.

How do you become an Ohio electrical safety inspector?

You can qualify as an Ohio-registered electrical engineer or through trainee and journeyman experience, like 4 years as an ESI trainee or 6 years as a journeyman. After that, pass ICC E2 or NCPCCI 2B.

How often does an Ohio code official certification renew?

Once every 3 years, and each cycle takes 30 hours of continuing education.

Where this information comes from

  1. Ohio Department of Commerce, Board of Building Standards
  2. NCPCCI candidate information (PDF)
  3. PSI Exams
  4. International Code Council (ICC) certification exams: MM, MG, BC, B2, B3, E2, E3, M2, M3, P2, P3

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Ohio Board of Building Standards.