North Carolina Code Official License: Requirements, Exam and How to Apply, North Carolina Code Official License, North Carolina, Building inspector, Electrical inspector, Mechanical inspector, Plumbing inspector, Fire inspector, North Carolina Code Officials Qualification Board (Office of State Fire Marshal), how to get a North Carolina Code Official License, North Carolina Code Official License requirements, North Carolina Code Official License exam, North Carolina licensing board, North Carolina contractor license, license application steps, Education

Home Licenses Code Official License North Carolina

Code Official · Levels I–III

North Carolina Code Official License: Requirements, Exam and How to Apply

This guide explains how to become a North Carolina building, electrical, mechanical, plumbing or fire inspector, covering the three certificate levels, the Board courses, the state exam and renewing each year.

Last updated October 28, 2026 from North Carolina Code Officials Qualification Board requirements

Exam time

3.5 hrs

Open-book Level I exam with 150 questions

Time to get license

Varies

Based on the education or experience your level calls for

Continuing ed

6 hrs

Each renewal; licenses renew yearly

Do you need a North Carolina code official license?

Yes, if you’ll be doing code enforcement for a city or county in North Carolina. The Code Officials Qualification Board (COQB), which sits within the Office of State Fire Marshal, certifies inspectors at three levels across five trades. Your employer must state in writing that your job includes code enforcement.

You need the license when

  • A city or county has you inspecting building, electrical, mechanical, plumbing or fire work
  • Your work includes plan review, permit issuing or code inspections
  • You enforce the North Carolina Fire Code or State Building Code
  • You’d like to advance to Level II or Level III work on bigger, taller buildings

Exceptions

  • Tradespeople and contractors who do the installation work (they need trade licenses of their own)
  • We couldn’t confirm any other exemptions, so check with the COQB if your job isn’t clearly code enforcement

Working without the correct certificate

We couldn’t confirm specific penalties. Generally, the COQB has the power to deny an application or discipline a code official’s certificate. Every level also caps the height and size of the buildings you can inspect, so don’t go beyond yours.

How to get a North Carolina code official license in 6 steps

  1. Choose a trade and level Before you start
    Start by settling on a trade (building, electrical, mechanical, plumbing or fire). Then look at the education or experience each level asks for and see where you fit.
  2. Get certified by your employer Before you apply
    You need a notarized statement confirming your job includes code enforcement. It’s signed by your city or county manager, clerk or inspections director.
  3. Complete the Board courses 70 to pass
    Take the Board-developed courses for your trade, along with the law and administration course that every applicant takes.
  4. Pass the PSI state exam Exam day
    Book with PSI by calling 855-746-8173 or online at psiexams.com/nccode. The Level I exam is open book, with 150 questions in 3.5 hours and a 70% passing score.
  5. Apply to the COQB Final step
    Send your application to the Code Officials Qualification Board. If you have questions, call 800-634-7854.
  6. Renew yearly Every year
    Renew your license each year and finish 6 hours of continuing education.

North Carolina code official application checklist

North Carolina’s application on one page

  • A high school diploma or the equivalent
  • A notarized code enforcement statement from your city or county
  • Board courses passed with a score of 70 or better
  • The law and administration course, finished
  • A passing PSI score (70%) for your trade and level
  • The education or experience your level requires

North Carolina code official license classes

In North Carolina, code officials are certified by trade, with three levels in each. Level I is for smaller buildings. Levels II and III require more education or experience and let you work on bigger buildings with more stories.

BLDG Most common

Building inspector

Handles plan review, permits and inspections on homes and commercial buildings to make sure they meet state and local codes.

ExamBuilding Level 1, 2 or 3
LimitSet by level

ELEC NEC based

Electrical inspector

Checks electrical installations in homes, businesses and industrial buildings for safety and code compliance.

ExamElectrical Level 1, 2 or 3
LimitSet by level

MECH HVAC systems

Mechanical inspector

Checks boilers, ductwork, HVAC and other mechanical systems to confirm they’re installed safely and correctly.

ExamMechanical Level 1, 2 or 3
LimitSet by level

PLBG Plumbing systems

Plumbing inspector

Checks drainage systems, water heaters, fixtures and pipes for safe, correct installation.

ExamPlumbing Level 1, 2 or 3
LimitSet by level

FIRE Fire Code

Fire inspector

Checks sprinklers, fire alarms, exits, extinguishers and fire-resistant materials, reviews fire safety plans and writes up violations.

ExamFire Level 1, 2 or 3
LimitSet by level

Requirements for each North Carolina code official class

Every trade uses the same three levels. The full Level I checklist is spelled out in what we checked. For Levels II and III, the sources we checked only say that each level carries its own education or experience requirement.

RequirementLevel ILevel IILevel III
EducationA high school diploma or the equivalentNot statedNot stated
Education or experienceLevel I requirementLevel II requirementLevel III requirement
Certification from your employerNotarized, signed by a city or county manager, clerk or inspections directorNot statedNot stated
Board coursesScore of 70 or betterNot statedNot stated
Course on law and administrationRequiredNot statedNot stated
Written exam70% to passNot statedNot stated
Limits on building size and storiesTightest limitsWider than Level IWidest

The North Carolina code official exam

There’s a separate written exam for every trade and level, and PSI gives them at test centers in larger cities across the state. Because Level I is open book, being able to find things fast in your code books matters just as much as knowing the rules.

Format

Open book, written

Questions

150 (Level I)

Passing score

70%

Exam vendor

PSI

Scoring and content

  • Level I: 3.5 hours, 150 questions, 70% passing score
  • Building: the Building Code, Residential Code (Ch. 1–10, 44–46), Energy Conservation Code, and Administrative Code and Policies
  • Electrical: the National Electrical Code (NFPA 70), NC Energy Code, General Statutes and Administrative Code
  • Fire: hazardous materials, special occupancies, building and equipment design, general safety and administration
  • Plumbing: health care plumbing, traps, vents, storm and sanitary drainage, water supply, water heaters and fixtures

Retakes

  • Wait between attempts: Not stated
  • Exam fee: Not stated
  • To book or reschedule, call PSI at 855-746-8173
  • How long the Level II and Level III exams run: Not stated

Books and codes for this exam (open book)

The North Carolina code official exams are open book, so you can bring the approved code books into the testing room. The list below covers the Building, Electrical, Fire, Mechanical and Plumbing inspector exams, with the exam each book applies to noted where they differ.

ReferenceEditionHow it’s used
North Carolina State Building Code: Administrative Code and Policies — all inspector exams2018Allowed in exam
North Carolina State Building Code: Energy Conservation Code — Building, Electrical, Mechanical & Plumbing exams2018Allowed in exam
North Carolina State Building Code: Residential Code — Building Inspector exams2018Allowed in exam
North Carolina State Building Code: Building Code — Building Inspector exams2018Allowed in exam
NFPA 70: National Electrical Code (NEC) — Electrical Inspector exams2020Allowed in exam
North Carolina State Building Code: Mechanical Code — Mechanical Inspector exams2018Allowed in exam
North Carolina State Building Code: Plumbing Code — Plumbing Inspector exams2018Allowed in exam

The sources we checked list the open-book format for the Level I exams; check the candidate bulletin from the exam vendor for Level II and Level III.

Prep for the North Carolina code official exam

Our exam prep course, Total Prep and complete bundle for the North Carolina code official exam. Prices are coming soon.

Books for this exam

Renewing your North Carolina code official license

You renew a North Carolina code official license every year, with 6 hours of continuing education each cycle. Ask the COQB about the renewal fee and any late rules.

Renewal cycle

Every year

CE hours

6

Renewal fee

Not stated

Late penalty

Not stated

North Carolina code official CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

We couldn’t confirm any reciprocity for North Carolina code official licenses.

No reciprocity agreements on record

Since none are on record, expect to apply as a new candidate: meet your level’s education or experience requirement, complete the Board courses and pass the PSI exam. Check with the COQB on whether experience from another state counts.

City and county rules in North Carolina

Your certificate comes from the state, but you’re employed by a city or county inspections department, and it has to vouch for you before you apply.

What the state handles

  • Level I, II and III code official certificates
  • The law and administration course and the Board courses
  • Written exams, given through PSI
  • Yearly renewal with 6 hours of CE

What cities and counties handle

  • Running inspection departments and hiring inspectors
  • The notarized code enforcement statement your application needs
  • Permits and inspection scheduling
  • Local code enforcement and land use

Who oversees North Carolina code officials

Licensing authority

North Carolina Code Officials Qualification Board (Office of State Fire Marshal)

800-634-7854

ncosfm.gov/licensing-cert/code-officials-qualification-board-coqb

What the board does

  • Issues Level I–III certificates to building, electrical, mechanical, plumbing and fire code officials
  • Creates the courses applicants have to pass with a 70
  • Requires the written exam, which PSI gives
  • Sets the 6-hour CE requirement for yearly renewal

North Carolina code official license: common questions

Who issues North Carolina code official licenses?

That’s the Code Officials Qualification Board (COQB), housed in the North Carolina Office of State Fire Marshal. Call 800-634-7854 to reach it.

Do North Carolina code inspectors need ICC certifications?

The sources we checked describe North Carolina’s own certificates: for each trade and level, you take Board courses, a law and administration course and a state exam through PSI.

Is the North Carolina code official license exam open book?

Yes. The Level I exams are open book, and you get 3.5 hours for 150 questions. The passing score is 70%.

What are the North Carolina code official certificate levels?

North Carolina has three: Level I, Level II and Level III. They differ in the education or experience you need and in how big and how many stories your buildings can be.

Can you get a North Carolina code official certificate before you’re hired?

Your application needs a notarized statement from a city or county manager, clerk or inspections director confirming you’ll do code enforcement. In practice, that means having a local government job lined up first.

How often do North Carolina code officials renew, and how much CE is required?

You renew once a year, with 6 hours of continuing education for each cycle.

Which trades does North Carolina certify code officials in?

Five: building, electrical, mechanical, plumbing and fire. Every trade has a separate exam for each level.

Where this information comes from

  1. NC Office of State Fire Marshal, Code Officials Qualification Board
  2. PSI, North Carolina code official exams
  3. North Carolina State Building Code: Administrative Code and Policies
  4. NFPA 70, National Electrical Code

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the North Carolina Code Officials Qualification Board.