Michigan Code Official License: Requirements, Exam and How to Apply, Michigan Code Official License, Michigan, Building Inspector, Building Plan Reviewer, Building Official, Electrical Inspector / Plan Reviewer, Mechanical Inspector / Plan Reviewer, Plumbing Inspector / Plan Reviewer, Michigan Department of Licensing and Regulatory Affairs (LARA), how to get a Michigan Code Official License, Michigan Code Official License requirements, Michigan Code Official License exam, Michigan licensing board, Michigan contractor license, license application steps

Home Licenses Code Official License Michigan

Code Official · Inspector & Plan Reviewer

Michigan Code Official License: Requirements, Exam and How to Apply

Michigan registers inspectors and plan reviewers in four trades (building, electrical, mechanical and plumbing) along with building officials. This guide covers what each registration requires, how the PSI exams work and what it takes to stay active.

Last updated October 28, 2026 from Michigan Department of Licensing and Regulatory Affairs requirements

Exam time

2–3 hrs

Most exams run 120 min; electrical runs 180 min

Time to get license

Varies

Anywhere from a trade license to 7 yrs of experience

Continuing ed

34–40 hrs

Inspectors need 34, plan reviewers need 40

Do you need a Michigan code official license?

Yes. If you inspect construction for code compliance, review plans, or run code enforcement as a building official in Michigan, you need a state registration from the Department of Licensing and Regulatory Affairs (LARA). Registrations are issued trade by trade. You can qualify with a trade license, years of field experience or a registration from another state.

You need the license when

  • You check building, electrical, mechanical or plumbing work against the code
  • You look over building, electrical, mechanical or plumbing plans before a permit goes out
  • Your job is enforcing and administering the adopted codes for building, electrical, mechanical or plumbing work, or several of those at once
  • You plan to become a building official, which first takes 2 years of registration as an inspector or plan reviewer

Exceptions

  • Holding a current Michigan architect or engineer license counts toward qualifying as a building inspector
  • If you’re registered as an inspector or plan reviewer in another state or country, you can qualify for building or plumbing registration by proving that registration and what it required

Penalties for working unregistered

We couldn’t confirm specific penalties. LARA enforces the Skilled Trades Regulation Act and has the power to refuse, discipline or revoke a registration, so get registered before you start any inspection or plan review work.

How to get a Michigan code official license in 6 steps

  1. Pick a registration Before you start
    Settle on a trade (building, electrical, mechanical or plumbing) and whether your work will be inspections, plan review or both.
  2. Make sure you qualify Before you apply
    Gather your Michigan trade license or experience affidavits from past and current employers. If you want building plan reviewer, you also need 2 years of work as a journey-level structural or skilled trades worker.
  3. Apply for the exam Before the exam
    File with LARA, pay the fees and include copies of your current state or local licenses plus any ICC or NFPA certifications.
  4. Pass the PSI exam Exam day
    After LARA approves your application, book a PSI test center in one of Michigan’s bigger cities. Every exam is open book, and the passing score is 75%.
  5. Get your registration By mail
    PSI sends your score to LARA, and LARA mails you your inspector or plan reviewer registration.
  6. Stay current on CE Each renewal
    Finish state-approved continuing education each cycle: 34 hours if you’re an inspector, 40 hours if you’re a plan reviewer.

Michigan code official application checklist

Michigan’s application on one page

  • Choose a trade: building, electrical, mechanical or plumbing
  • A Michigan trade license, or employer affidavits of experience
  • Copies of state or local licenses plus any ICC or NFPA certifications
  • LARA approval of your application for examination
  • A passing PSI score (75%)
  • Budget for 34 or 40 hours of CE when you renew

Michigan code official license classes

Choose the registration for the trade you plan to inspect or review. All of them require an approved application for examination and a passing score on a PSI exam.

BLD-I Most common

Building Inspector

Checks buildings under construction, renovation or alteration to make sure they meet the Michigan Building Code.

ExamPSI, 80 questions
Limit6–7 yrs experience

BLD-PR Plan review

Building Plan Reviewer

Checks architectural, structural, fire protection and other building plans against the code.

ExamPSI building exam
Limit7 yrs + 2 yrs journey-level

BO Next step

Building Official

Runs and enforces the adopted building, electrical, mechanical or plumbing codes.

ExamPSI building exam
Limit2 yrs as an inspector or plan reviewer

ELEC Electrical

Electrical Inspector / Plan Reviewer

Checks electrical installations or reviews electrical plans for homes, businesses and industrial sites.

ExamPSI, 84 questions
LimitJourneyman or master electrical license

MECH Mechanical

Mechanical Inspector / Plan Reviewer

Looks at mechanical systems (HVAC, boilers, ductwork, piping and more) in the field or on plans to confirm they meet the Michigan Mechanical Code.

ExamPSI, 100 questions
LimitLicense in 3 of 4 categories, or 6 yrs

PLMB Plumbing

Plumbing Inspector / Plan Reviewer

Looks at drainage systems, water heaters, fixtures and piping in the field or on plans to confirm they meet the Michigan Plumbing Code.

ExamPSI, 76 questions
LimitJourney or master plumber, or 5 yrs

Requirements for each Michigan code official class

Every trade has its own way to qualify. In most, you can use a Michigan trade license or documented experience working for a licensed contractor.

RequirementBuildingElectricalMechanicalPlumbing
Qualifying by license6 yrs experience plus a residential builder licenseJourneyman or master electrical license1+ yr holding a Michigan mechanical license in 3 of 4 categoriesMaster plumber license, or journey plumber license held 2+ yrs
Qualifying by experience7 yrs of general building constructionNot stated6 yrs under a licensed contractor in 3 of 4 categories (affidavit)5 yrs working for a licensed plumbing contractor (affidavit)
Qualifying from out of stateRegistered in another state or countryNot statedNot statedLicensed in another state or country
Inspector exam80 questions, 120 min84 questions, 180 min100 questions, 120 min76 questions, 120 min
Passing score75%75%75%75%
Continuing educationInspectors 34 hrs, plan reviewers 40 hrsInspectors 34 hrs, plan reviewers 40 hrsInspectors 34 hrs, plan reviewers 40 hrsInspectors 34 hrs, plan reviewers 40 hrs

The Michigan code official exam

PSI gives a separate open book exam for each trade. Expect questions on the trade code, the referenced standards, the Skilled Trades Regulation Act and the Stille-DeRossett-Hale Single State Construction Code Act (Act 230 of 1972).

Format

Open book

Questions

76–100

Passing score

75%

Exam vendor

PSI

Scoring and content

  • Building: 120 minutes and 80 questions, based since April 9, 2025 on the 2021 Michigan Building Code (drawn from the 2021 IBC)
  • Electrical inspector: 180 minutes and 84 questions on the Part 8 Electrical Code Rules plus the codes adopted under Act 230
  • Mechanical inspector: 120 minutes and 100 questions, using the 2021 International Fuel Gas Code and 2021 Michigan Mechanical Code
  • Plumbing inspector: 120 minutes and 76 questions on the 2021 Michigan Plumbing Code
  • The building references also cover the Michigan Residential Code, ICC A117.1 and the Michigan Rehabilitation Code for Existing Buildings

Retakes

  • Wait before a retake: Not stated
  • Fee to retake: Not stated
  • Details on the plan reviewer exam: Not stated
  • Read PSI’s Michigan candidate information before booking

Books and codes for this exam (open book)

All four Michigan code official exams (building, electrical, mechanical and plumbing inspector and plan reviewer) are open book, so you bring the approved code books into the PSI testing center along with printed copies of the state acts and rules. For the electrical exam, the NEC may only carry the publisher’s factory tabs.

ReferenceEditionHow it’s used
2021 Michigan Building Code — Building exam2021Allowed in exam
Michigan Rehabilitation Code for Existing Buildings — Building exam2021Allowed in exam
Michigan Residential Code — Building exam2015Allowed in exam
ICC A117.1: Accessible and Usable Buildings and Facilities — Building exam2009Allowed in exam
Michigan Construction Code Part 11: Premanufactured Units — Building examNot statedAllowed in exam
NFPA 70: National Electrical Code (NEC) — Electrical exam2023Allowed in exam
Michigan Electrical Code Rules, Part 8 — Electrical examNot statedAllowed in exam
2021 Michigan Mechanical Code — Mechanical exam2021Allowed in exam
International Fuel Gas Code (IFGC) — Mechanical exam2021Allowed in exam
2021 Michigan Plumbing Code — Plumbing exam2021Allowed in exam
Stille-DeRossett-Hale Single State Construction Code Act (Act 230 of 1972) — all examsNot statedAllowed in exam
Michigan Skilled Trades Regulation Act (Act 407 of 2016) — all examsNot statedAllowed in exam

The building exams moved from the 2015 Michigan code books to the 2021 Michigan Building Code on April 9, 2025.

Prep for the Michigan code official exam

Our exam prep course, Total Prep and complete bundle for the Michigan code official exam. Prices are coming soon.

Books for this exam

Renewing your Michigan code official license

Renewal means finishing state-approved continuing education: 34 hours if you’re an inspector and 40 hours if you’re a plan reviewer. Ask LARA for your renewal date and fee.

Renewal cycle

Not stated

CE hours

34 inspector / 40 plan reviewer

Renewal fee

Not stated

Late penalty

Not stated

Michigan code official CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Reciprocity in Michigan is limited, so confirm the latest with LARA. If you apply for building or plumbing and already hold an inspector or plan reviewer registration somewhere else, you can use it to qualify.

Other states and countries: experience requirement

If you’re registered as an inspector or plan reviewer elsewhere and you’re applying for building or plumbing, send LARA proof of that registration along with the other state’s or country’s requirements. You still have to apply and take the exam in Michigan.

Electrical and mechanical: no agreement on record

We couldn’t confirm an out-of-state route. Expect to qualify through a Michigan trade license or documented experience.

City and county rules in Michigan

The state issues your registration, but the actual inspections and plan reviews are done for the local governments that enforce the adopted codes.

What the state handles

  • Registrations for inspectors, plan reviewers and building officials
  • Exam applications and the exams themselves, through PSI
  • CE requirements
  • The adopted codes and the Single State Construction Code Act

What cities and counties handle

  • Hiring plan reviewers and inspectors
  • Building permits and inspections
  • Everyday code enforcement

Who oversees Michigan code officials

Licensing authority

Michigan Department of Licensing and Regulatory Affairs (LARA)

517-241-0199

michigan.gov/lara

What the board does

  • Reviews exam applications and issues registrations
  • Decides the license and experience requirements for each registration
  • Decides what continuing education renewal takes
  • Runs the Single State Construction Code Act and the adopted codes

Michigan code official license: common questions

Do you need a trade license to become a Michigan code inspector?

Not in every case. Each trade lets you qualify through either a Michigan trade license or documented experience, such as 5 years with a licensed plumbing contractor or 7 years of general building construction. For electrical, you need a journeyman or master electrical license.

How do you become a Michigan building official?

First hold a Michigan inspector or plan reviewer registration for 2 years or more. Then apply to LARA for building official registration.

Who runs the Michigan code official license exams?

PSI does. LARA has to approve your application for examination before you can book, and the test centers are in Michigan’s bigger cities.

Are Michigan code inspector exams open book?

Yes. All of the inspector exams are open book, and the passing score is 75%.

How many questions are on each Michigan code inspector exam?

Plumbing has 76 questions, building 80, electrical 84 and mechanical 100. You get 120 minutes on most of them and 180 on electrical.

How many CE hours do Michigan code officials need?

To renew, you need 34 hours of state-approved CE as an inspector or 40 hours as a plan reviewer.

Does Michigan offer reciprocity for out-of-state inspector registrations?

Only in a limited way. If you’re registered elsewhere and applying for building or plumbing, you can use that registration to qualify, but you still apply in Michigan and pass the Michigan exam.

Where this information comes from

  1. Michigan Department of Licensing and Regulatory Affairs
  2. PSI, Michigan exam catalog
  3. Stille-DeRossett-Hale Single State Construction Code Act, Act 230 of 1972
  4. Skilled Trades Regulation Act, Act 407 of 2016
  5. Michigan Electrical Code Rules, Part 8 (PDF)
  6. Construction Code, Part 11, Premanufactured Units (PDF)

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Michigan Department of Licensing and Regulatory Affairs.