Oregon Low Voltage License: Requirements, Exam and How to Apply, Oregon Low Voltage License, Oregon, Limited Energy Technician, Class A, Limited Energy Technician, Class B, Retaking the exam, Oregon Building Codes Division, how to get a Oregon Low Voltage License, Oregon Low Voltage License requirements, Oregon Low Voltage License exam, Oregon licensing board, Oregon contractor license, license application steps, exam reference books, Class A exam, All limited energy work, Class B exam, Apprenticeship path, Approved Oregon apprenticeship, Training path

Home Licenses Low Voltage License Oregon

Low Voltage License · Limited Energy Class A & B

Oregon Low Voltage License: Requirements, Exam and How to Apply

In Oregon, the low voltage license goes by the name Limited Energy Technician license. Here you’ll find both classes, the experience each one takes, the exam, and how to apply with the Building Codes Division.

Last updated October 27, 2026 from Oregon Building Codes Division requirements

Exam time

3 hrs

For Class A; Class B gets 2 hrs

Time to get license

Varies

You need 4,000–12,000 hrs of experience, depending on class and path

Continuing ed

Required

Due before every renewal; we couldn’t confirm the hours

Do you need an Oregon low voltage license?

Yes. Oregon’s Building Codes Division (BCD) covers low voltage work through its limited energy licenses. The class you need comes down to whether you’ll touch protective signaling, such as fire and burglar alarms.

You need the license when

  • You put in, change or fix limited energy systems
  • You handle protective signaling like burglar alarm, nurse call or fire alarm systems (Class A only)
  • The electrical work you do on limited energy systems has no protective signaling in it (Class B or higher)
  • You’re employed by an electrical contractor, by a limited energy contractor, or by one industrial plant employer

Exceptions

  • Protective signaling is off limits for Class B, so fire and life safety work calls for Class A
  • You can’t contract on a technician license by itself; you need an electrical contractor license, or you work for a licensed contractor or a single industrial employer

What happens if you work unlicensed

We couldn’t confirm penalty amounts. Generally, the Building Codes Division licenses limited energy technicians and can act against anyone doing regulated electrical work without the proper license, so get your license before you start low voltage jobs.

How to get an Oregon low voltage license in 6 steps

  1. Choose your class First step
    Go with Class A if your work includes fire alarm, nurse call, burglar alarm or other life safety systems. If not, Class B may cover you.
  2. Earn your hours Ahead of applying
    Complete an approved apprenticeship, or rack up the classroom and on-the-job hours your class calls for, split out by work category.
  3. Apply to BCD Ahead of the exam
    File your application with BCD along with verified education and work history. If you’re a Class B applicant on the 4,000-hour path, you can take the 32-hour training once you’re approved.
  4. Get cleared to test Once it’s reviewed
    You need pre-approval. After BCD signs off on your application, the state reaches out with the date, time and place of your exam.
  5. Pass your state exam On test day
    The Class A exam is open book, with 52 questions, 3 hours and a 75% passing score. The Class B exam has 28 questions and runs 2 hours. You’ll find testing centers in the bigger cities.
  6. Receive your license Once you pass
    Finish licensing through BCD. After that, you can work for a single industrial employer, an electrical contractor or a limited energy contractor.

Oregon low voltage application checklist

Oregon’s application on one page

  • Class chosen: A for protective signaling, B for everything else
  • Proof of a finished apprenticeship, or verified classroom and on-the-job hours
  • Experience split out by OAR work category
  • Application filed with BCD
  • Approval from the state and an exam date
  • A passing score on the exam for your class

Oregon low voltage license classes

There are two limited energy technician classes in Oregon. What sets them apart is protective signaling: fire alarm and other life safety systems fall only under Class A.

LEA Full scope

Limited Energy Technician, Class A

Put in, change and fix every kind of limited energy system, protective signaling included (fire alarm, nurse call, burglar alarm).

ExamClass A exam
LimitAll limited energy work

LEB No protective signaling

Limited Energy Technician, Class B

Electrical work on limited energy systems, minus protective signaling.

ExamClass B exam
LimitNo protective signaling

Requirements for each Oregon low voltage class

You can qualify for either class more than one way. Oregon’s administrative rules split the hour totals into set work categories.

RequirementClass A (LEA)Class B (LEB)
Apprenticeship pathApproved Oregon apprenticeshipBoard-approved apprenticeship
Training path432 hours in the classroom + 6,000 hours on the job4,000 hours plus a 32-hour training program the board approves
Experience-only path12,000 hours earned outside Oregon8,000 hours
Category rulesOAR 918-282-0345 and 918-282-0355OAR 918-282-0365 (the 300 percent rule applies)
Protective signaling experienceRequired (burglar alarm, nurse call, fire alarm)Not required
Exam52 questions, 3 hrs, pass with 75%28 questions, 2 hrs

The Oregon low voltage exam

Once BCD approves your application, you sit for the exam for your class. Because the Class A exam is open book, it pays to know your references well.

Format

Open book (Class A)

Questions

52 (A) / 28 (B)

Passing score

75% (Class A)

Exam vendor

Not stated

Scoring & content

  • Class A: open book, 52 questions, 3 hours, 75% to pass
  • Class B: 28 questions, 2 hours; we couldn’t confirm the passing score
  • The references cover the NEC plus Oregon’s amendments to the 2026 NEC
  • OAR division 918 and Oregon Revised Statutes chapter 479 apply too

Retaking the exam

  • You wait at least 30 days before a retake
  • A retake costs a $50 reapplication fee
  • Ask BCD for the latest retake rules

Books and codes for this exam (varies)

The Class A Limited Energy Technician exam is open book, and every reference below is approved for it. The sources we checked don’t say whether the Class B exam is open book.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2026Allowed in exam
American Electricians’ Handbook17th editionAllowed in exam
Ugly’s Electrical References2026Allowed in exam
Key Word Index (NEC)2026Allowed in exam
Oregon Amendments to the National Electrical Code2026Allowed in exam
Oregon Revised Statutes, Chapter 479Not statedAllowed in exam
Oregon Administrative Rules, Chapter 918Not statedAllowed in exam
Electrical Black BookNot statedAllowed in exam
NEC Handbook2020Allowed in exam
Ferm’s Fast Finder IndexNEC 2017Allowed in exam

Prep for the Oregon low voltage exam

Our exam prep course, Total Prep and complete bundle for the Oregon low voltage exam. Prices are coming soon.

Books for this exam

Renewing your Oregon low voltage license

An Oregon limited energy technician license lasts three years, and renewing costs $50, the same as the first license fee. Continuing education is due before each renewal, so ask BCD for the current hours.

Renewal cycle

3 years

CE hours

Required (we couldn’t confirm the hours)

Renewal fee

$50

Late penalty

Not stated

Licensed in another state?

The Arkansas and Utah reciprocity agreements Oregon holds are for the General Supervising Electrician license. Limited energy licenses aren’t part of them.

No reciprocity for this license

We couldn’t confirm any agreements for limited energy technicians, so expect to apply as a new applicant, show verified experience and take the exam. Check with BCD.

City and county rules in Oregon

The state issues your limited energy license. Job-site matters belong to cities and counties.

The state covers

  • Class A and B Limited Energy Technician licenses
  • Reviewing applications and approving exams
  • Continuing education needed to renew
  • Oregon’s NEC amendments

Cities & counties cover

  • Local business licensing
  • Local permit and inspection rules, if any (ask your city)

Who oversees low voltage technicians in Oregon

Licensing authority

Oregon Building Codes Division

503-378-4133

oregon.gov/bcd, Electrical

What the board does

  • Grants limited energy technician licenses
  • Checks applications and verified experience
  • Approves applicants and books state exams
  • Sets the continuing education rules for renewal

Oregon low voltage license: common questions

What’s the name of the low voltage license in Oregon?

It’s the Limited Energy Technician license, and it comes in two classes: Class A (LEA) and Class B (LEB).

How do Oregon’s Class A and Class B limited energy licenses differ?

With Class A, you can work on any limited energy system, including protective signaling such as nurse call, burglar alarm and fire alarm. Class B is for limited energy work that leaves protective signaling out.

How many hours does an Oregon Class B limited energy license take?

You have three options: finish an apprenticeship the board approves, log 4,000 hours and complete a 32-hour training program, or log 8,000 hours. The experience paths fall under the 300 percent rule.

How many hours does an Oregon Class A limited energy license take?

Complete an approved Oregon apprenticeship, or show 6,000 hours on the job plus 432 hours in the classroom. If your experience comes from outside Oregon, you need 12,000 hours, protective signaling work included.

Can you use books on the Oregon limited energy exam?

Yes, Class A is an open-book exam. You get 52 questions and 3 hours, and you need 75% to pass.

Do I need approval before taking the Oregon low voltage license exam?

Yes. First you send in your application with verified education and experience. After you’re approved, the state reaches out with an exam date.

Is there reciprocity for Oregon limited energy licenses?

We couldn’t confirm any. The agreements Oregon has with Arkansas and Utah apply only to the General Supervising Electrician license.

Does an Oregon limited energy license require continuing education?

Yes. You must complete continuing education before every renewal in Oregon. Ask BCD how many hours are currently required.

Where this information comes from

  1. Oregon Building Codes Division, Electrical licensing
  2. Oregon Building Codes Division, Oregon amendments to the 2026 NEC (PDF)
  3. Oregon Revised Statutes chapter 479
  4. Oregon Administrative Rules division 918 (OAR 918-282-0345, 0355, 0365)
  5. Oregon Building Codes Division, Electrical License Application (Form 440-2570)
  6. Oregon Building Codes Division, License Reapplication (Form 440-2574)
  7. Oregon Building Codes Division, Single or Combination Contractor License Application (Form 440-2888)
  8. ORS 479.840, electrical license fees

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Oregon Building Codes Division.