
Home Licenses General Contractor License Oregon
General Contractor · Residential & Commercial
Oregon General Contractor License: Requirements, Exam and How to Apply
This guide shows you how to choose an endorsement, complete the required training, pass the state exam and get your license from Oregon’s Construction Contractors Board.
Last updated October 27, 2026 from Oregon Construction Contractors Board requirements
Exam time
3 hrs
Open book, 80 questions
Time to get license
Varies
Residential: training plus the exam. Commercial: 4–8 yrs of experience
Continuing ed
Varies
Due at every renewal; residential and commercial hours are different
Do you need an Oregon general contractor license?
Yes, if you’re paid for construction work. Oregon requires a Construction Contractors Board (CCB) license for anyone paid to do any construction activity that improves real property. Large commercial structures call for a commercial endorsement, and doing both residential and large commercial work means you need both.
You need the license when
- Any paid compensation for construction that improves real property puts you under the rule
- You perform, supervise or arrange building trades on small commercial or residential projects (residential endorsement)
- You take on large commercial projects (commercial endorsement)
- You arrange for construction on property you own and plan to sell (developer endorsement)
- Your business offers a narrow service like locksmith, home inspection, home warranty or restoration work (restricted residential endorsement)
Exceptions
- According to the CCB, unpaid work isn’t covered by the licensing rule
- A developer still needs a developer endorsement even without doing any construction personally, but licensed general contractors oversee the building
- There may be other exemptions; check with the CCB before you take on work without a license
Penalties for working without a license
Oregon’s contractor licensing law is enforced by the CCB, which can act against anyone paid for construction work without a license. Before you bid or start a job, get your license, bond and insurance in place.
How to get an Oregon general contractor license in 5 steps
- Name your RMI Before anything else
Your business needs a Responsible Managing Individual (RMI). Choose an owner or employee to take the required training and sit for the state exam. - Finish pre-license training 16 hrs
Your RMI takes 16 hours of state-approved training on business practices and law. This is required for anyone getting an Oregon contractor license. - Pass the state exam 80 questions in 3 hrs
Book with PSI by calling 855-746-8170 or visiting candidate.psiexams.com. The exam is open book, and 70% passes. You’ll find test centers in the larger cities around the state. - Take care of the legal steps Ahead of applying
File your business with the Oregon Secretary of State, get the correct tax IDs, secure your CCB surety bond and buy general liability insurance (and workers’ comp if you have employees). - Apply to the CCB Last step
Your last step is the contractor license application to the Construction Contractors Board. Reach the CCB at 503-378-4621 or online at oregon.gov/ccb.
Oregon general contractor application checklist
Everything for your Oregon application in one place
- A Responsible Managing Individual (RMI) named
- 16 hours of pre-license training finished
- A passing score on the PSI contractor exam
- Your business registered with the Oregon Secretary of State
- A CCB surety bond that matches your endorsement
- A general liability certificate, plus workers’ comp if you have employees
Oregon general contractor license classes
In Oregon, contractors are licensed by endorsement. With a residential endorsement, you can do small commercial and residential work. With a commercial endorsement, you can do large and small commercial work. Every endorsement has its own insurance and bond minimums.
RGC Most popular
Residential General Contractor
Performs, supervises or arranges any number of unrelated building trades on small commercial or residential projects.
| Exam | State exam |
| Limit | We couldn’t confirm a dollar limit |
RSC One or two trades
Residential Specialty Contractor
Covers one or two unrelated building trades on small commercial or residential projects, or three or more trades on a single property when the contract is $2,500 or less.
| Exam | State exam |
| Limit | $2,500 when it’s 3+ trades |
RLC Part-time
Residential Limited Contractor
Covers any number of trades on small commercial or residential projects, for contractors doing part-time, hobby or maintenance-type work.
| Exam | State exam |
| Limit | $5,000 per contract; $40,000 a year |
RD No construction work
Residential Developer
Arranges construction on small commercial or residential property you own and intend to sell, working through licensed general contractors.
| Exam | State exam |
| Limit | Not stated |
CGC1 Bigger projects
Commercial General Contractor Level 1
Covers any number of unrelated building trades on large or small commercial projects. You need 8 years of construction experience.
| Exam | State exam |
| Limit | We couldn’t confirm a dollar limit |
CGC2 4 years of experience
Commercial General Contractor Level 2
Does the same work as Level 1, but needs less experience and has lower insurance and bond minimums.
| Exam | State exam |
| Limit | We couldn’t confirm a dollar limit |
CSC1/2 One or two trades
Commercial Specialty Contractor
Covers one or two unrelated building trades on large or small commercial projects. The work is the same for Levels 1 and 2.
| Exam | State exam |
| Limit | Not stated |
CD No construction work
Commercial Developer
For commercial property you own and plan to sell: you arrange the building, and licensed general contractors do it.
| Exam | State exam |
| Limit | Not stated |
Requirements for each Oregon general contractor class
Everyone takes the same training and state exam. The experience, insurance and bond go up with the endorsement. If you hold a dual endorsement, you have to meet both the commercial and residential requirements.
| Requirement | Residential (RGC) | Commercial Level 2 | Commercial Level 1 |
|---|---|---|---|
| Training before licensing | 16 hours | 16 hours | 16 hours |
| State exam | Required | Required | Required |
| Experience | Not stated | 4 years | 8 years |
| CCB surety bond | $25,000 | $25,000 | $80,000 |
| General liability | $500,000 for each occurrence | $1 million in aggregate | $2 million in aggregate |
| Workers’ comp | Only if you have employees | Only if you have employees | Only if you have employees |
| Business registration | Secretary of State | Secretary of State | Secretary of State |
The Oregon general contractor exam
There’s a single Oregon contractor exam covering law, business and project management. Because it’s open book, knowing your way around the reference manual matters as much as knowing the content.
Format
Open book
Questions
80
Passing score
70%
Exam vendor
PSI
Scoring and content
- 80 questions in 180 minutes, and you need 70% to pass
- Content: Oregon contractor law, contracts, lien law, business structure, employees, subcontractors, estimating and bidding
- Plus: project management and scheduling, safety, Oregon building codes, the building exterior shell, environmental topics, and financial management and tax basics
- You may tab and highlight the reference: the Oregon edition of the NASCLA Contractors Guide to Business, Law and Project Management
Retakes
- We couldn’t confirm the retake rules; the exam costs $60, which you pay to PSI
- Book or reschedule with PSI at 855-746-8170
- Already passed the NASCLA Commercial Contractor exam? The course may be waived, though the business and law exam is still required
Books and codes for this exam (open book)
The Oregon contractor exam is open book. The Oregon edition of the NASCLA guide can be brought into the exam, tabbed and highlighted, but no online course material is allowed in the room.
| Reference | Edition | How it’s used |
|---|---|---|
| NASCLA Contractor’s Guide to Business, Law and Project Management | Oregon Construction Contractors edition | Allowed in exam |
If you’ve already passed the NASCLA Commercial Contractor exam, you still have to pass the business and law exam.
Prep for the Oregon general contractor exam
Our exam prep course, Total Prep and complete bundle for the Oregon general contractor exam. Prices are coming soon.
Books for this exam
Renewing your Oregon general contractor license
You renew an Oregon CCB license every two years for $400. Continuing education is required each time, and residential and commercial endorsements need different hours, so confirm yours with the CCB before your license runs out.
Renewal cycle
2 years
CE hours
Varies
Renewal fee
$400
Late penalty
Not stated
Oregon general contractor CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
Oregon has no reciprocity agreements, so a license from another state won’t carry over.
No reciprocity in place
You apply as a new applicant: finish the 16-hour training, pass the Oregon exam and meet your endorsement’s insurance and bond requirements.
City and county rules in Oregon
A CCB license is good anywhere in Oregon, but permits and inspections on each job are still controlled by cities and counties.
What the state handles
- Contractor licenses and endorsements, issued by the CCB
- Pre-license training, plus the state exam through PSI
- Minimums for bonds and insurance
- Renewals and continuing education
What cities and counties handle
- Building permits
- Inspections
- Local business licenses or registration, where they apply
Who oversees Oregon contractors
What the board does
- Issues contractor licenses and endorsements and handles renewals
- Sets the insurance and bond requirements for every endorsement
- Requires continuing education and pre-license training
- May review Department of Revenue records to confirm the business volume of limited contractors
Oregon general contractor license: common questions
Do you need a license for construction work in Oregon?
Yes, if you’re paid. The CCB licenses anyone who earns compensation from any construction activity that improves real property.
Is the Oregon contractor license exam open book?
Yes. You get 180 minutes for 80 questions, and 70% passes. You’re allowed to tab and highlight the approved NASCLA reference manual.
Is a pre-license course required for an Oregon contractor license?
Yes. Before the license is issued, your Responsible Managing Individual has to finish 16 hours of state-approved training on business practices and law.
How much experience does an Oregon contractor license require?
We couldn’t confirm an experience requirement for residential endorsements. For commercial work, Level 1 General Contractor needs 8 years and Level 2 needs 4 years.
What bond does an Oregon contractor license require?
For a Residential General Contractor, it’s a $25,000 CCB residential bond. Commercial Level 1 needs $80,000, and Level 2 needs a $25,000 commercial bond.
Does an out-of-state contractor license transfer to Oregon?
No. Since Oregon has no reciprocity agreements, you’ll apply as a new applicant.
Is continuing education required for an Oregon contractor license?
Yes, at every renewal. How many hours you need depends on whether your endorsement is commercial or residential.
Where this information comes from
- Oregon Construction Contractors Board
- PSI, Oregon contractor exam scheduling
- Oregon Construction Contractors Board, License endorsements and bond and insurance requirements
- Oregon CCB, CCB license fees
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Oregon Construction Contractors Board.
