Oregon Electrician License: Requirements, Exam and How to Apply, Oregon Electrician License, Oregon, General Supervising Electrician, General Journeyman Electrician, Limited Residential Electrician, Electrical Contractor, Oregon Building Codes Division (BCD), how to get a Oregon Electrician License, Oregon Electrician License requirements, Oregon Electrician License exam, Oregon licensing board, Oregon contractor license, license application steps, exam reference books, Oregon Electrical exam, Works under a supervisor, Business license, Primary route

Home Licenses Electrician License Oregon

Electrician License · Supervising, Journeyman & Residential

Oregon Electrician License: Requirements, Exam and How to Apply

In Oregon, every electrician paid for their work needs a license. This guide explains the supervising, journeyman, limited residential and contractor licenses, the experience each one takes and what the exam covers.

Last updated October 27, 2026 from Oregon Building Codes Division requirements

Exam time

4 hrs

Open book, 64 questions

Time to get license

~4 yrs

For journeyman, 8,000 hours of on-the-job experience

Continuing ed

Required

Due ahead of every renewal; we couldn’t confirm the hours

Do you need an Oregon electrician license?

Yes. In Oregon, anyone paid for electrical work of any kind needs a license. A company running an electrical business also needs an Electrical Contractor license, along with a Construction Contractors Board license and bond.

You need the license when

  • You’re paid for any electrical work for pay in Oregon
  • You’re the one who plans and lays out electrical work, signs the permits, or oversees a service installation (General Supervising Electrician)
  • You wire one-, two- or multi-family homes no more than three floors above grade (at least Limited Residential)
  • Your company makes electrical installations as a business (Electrical Contractor, plus a CCB license and bond)

Exceptions

  • We couldn’t confirm any exemptions. Read ORS chapter 479 or ask the BCD before working without a license
  • Limited residential electricians and journeymen don’t need a supervising license, but a general supervising electrician has to oversee their work

Penalties for working without a license

We couldn’t confirm penalty amounts. The Building Codes Division enforces Oregon’s electrical licensing law (ORS chapter 479) and can act against anyone working without the license they need.

How to get an Oregon electrician license in 6 steps

  1. Choose your license Before anything else
    Your work and your documented hours decide which fits: General Journeyman, Limited Residential or General Supervising.
  2. Gather proof of training and experience Ahead of applying
    Collect verified on-the-job and classroom hours. If you’re applying as a journeyman with out-of-state experience, you need no less than 1,000 hours each in commercial, industrial and residential work.
  3. Send your application to the BCD Pre-approval needed
    The Oregon Building Codes Division reviews your application, so send it along with proof of your experience and education. Questions? Phone 503-378-4133 or check the BCD electrical page.
  4. Receive your exam date Once approved
    After approval, the state reaches out with the date, time and location of your exam.
  5. Pass the Oregon Electrical exam Test day
    It’s open book, with 64 questions in 240 minutes, and 75% passes. You can tab and highlight your references.
  6. Get your license Once you pass
    The BCD completes your licensing. If you’re a contractor, you’ll also need the CCB to license and bond you, plus a passing Contractor exam and the 16-hour pre-license course.

Oregon electrician application checklist

Everything for your Oregon application in one place

  • Your license choice: journeyman, supervising or limited residential
  • Classroom hours, verified
  • On-the-job hours, verified and broken down by type
  • An application filed with the BCD for pre-approval
  • Your exam references printed, tabbed and highlighted
  • A passing score (75%) on the Oregon Electrical exam

Oregon electrician license classes

There are three licenses for individual electricians in Oregon, plus a separate one for electrical businesses. All three individual licenses share one exam.

GS Highest level

General Supervising Electrician

Plans, designs and lays out work and signs every permit. It’s the only license allowed to control, direct or supervise installing or altering an electrical service.

ExamOregon Electrical exam
LimitEvery kind of electrical work

GJ Most popular

General Journeyman Electrician

Does any electrical installation while a general supervising electrician supervises, directs and controls the work.

ExamOregon Electrical exam
LimitWorks under a supervisor

LR Homes only

Limited Residential Electrician

Covers installations on one-, two- and multi-family dwellings up to three floors above grade, with a general supervising electrician overseeing the work.

ExamOregon Electrical exam
LimitHomes up to 3 floors

EC Business license

Electrical Contractor

Allows a company to do business making electrical installations. The Construction Contractors Board also has to license and bond the company.

Exam16-hr course plus Contractor exam
LimitBusiness license

Requirements for each Oregon electrician class

You verify experience in hours. Documented out-of-state experience counts, and some routes use the 300 percent rule (see OAR 918-282-0180).

RequirementGeneral SupervisingGeneral JourneymanLimited Residential
Primary routeHave an Oregon journeyman license, or meet the qualifications for oneFinish an approved Oregon apprenticeship4,000 hrs of residential experience plus 288 hrs of classroom time
More experience8,000 hrs working as a journeymanOr 8,000 hrs from outside Oregon plus 576 hrs of classroom timeOr 8,000 hrs of residential experience gained outside Oregon
How experience breaks downNot statedNo less than 1,000 hrs each in commercial, industrial and residentialOnly residential
ExamOregon Electrical examOregon Electrical examOregon Electrical exam
Score to pass75%75%75%
SupervisionNot requiredOverseen by a general supervising electricianOverseen by a general supervising electrician
Continuing educationAhead of each renewalAhead of each renewalAhead of each renewal

The Oregon electrician exam

Applicants for General Supervising, General Journeyman and Limited Residential all take one Oregon Electrical exam. Since it’s open book, it pays to know your way around your references.

Format

Open book

Questions

64

Passing score

75%

Exam vendor

Not stated

Scoring and content

  • 64 questions in 240 minutes, and you need 75% to pass
  • The references include Oregon’s amendments to the NEC 2026 (NFPA 70) along with the code itself
  • Bring printed copies of ORS chapter 479 and OAR division 918 to the exam
  • You can tab and highlight your books
  • Separate Contractor exam: 80 questions in 180 minutes, and you need 70% to pass

Retakes

  • We couldn’t confirm a retake policy
  • The state has to pre-approve you before you take the exam
  • To retake, you file a reapplication form and pay the fee ($100 for GS, GJ and LR), and attempts must be at least 30 days apart

Books and codes for this exam (open book)

The Oregon electrical exam (the same exam for General Supervising, General Journeyman and Limited Residential) is open book, and references can be tabbed and highlighted. Every reference below is approved for the exam; electrical contractors also take a separate contractor exam, which the sources we checked don’t give a book list for.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2026Allowed in exam
American Electricians’ Handbook17th editionAllowed in exam
Ugly’s Electrical References2026Allowed in exam
Key Word Index (NEC)2026Allowed in exam
Oregon Amendments to the National Electrical Code2026Allowed in exam
Oregon Revised Statutes, Chapter 479Not statedAllowed in exam
Oregon Administrative Rules, Chapter 918Not statedAllowed in exam
Electrical Black BookNot statedAllowed in exam
NEC Handbook2020Allowed in exam
Ferm’s Fast Finder IndexNEC 2017Allowed in exam

Prep for the Oregon electrician exam

Our exam prep course, Total Prep and complete bundle for the Oregon electrician exam. Prices are coming soon.

Books for this exam

Renewing your Oregon electrician license

An Oregon electrician license lasts three years, and renewing costs the same as the original license fee. Continuing education is required ahead of every renewal, so confirm the current hours with the BCD.

Renewal cycle

3 years

CE hours

Required (we couldn’t confirm the hours)

Renewal fee

$100 (GS, GJ, LR)

Late penalty

Not stated

Oregon electrician CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Only the General Supervising Electrician license has reciprocity in Oregon, and just with two states.

Arkansas: General Supervising Electrician

This agreement covers the General Supervising Electrician license. Ask the BCD how to apply.

Utah: General Supervising Electrician

This agreement covers the General Supervising Electrician license. The BCD can walk you through applying.

Every other state: no agreement

You apply as a new applicant, document your out-of-state hours and pass the Oregon exam.

City and county rules in Oregon

The state issues electrical licenses that are good anywhere in Oregon. Ask your local building department about permits.

What the state handles

  • Electrician licenses, applications and exams (through the Building Codes Division)
  • Oregon’s NEC amendments
  • Continuing education ahead of renewal
  • Licensing and bonding for contractors (through the Construction Contractors Board)

What cities and counties handle

  • Electrical permits and inspections (ask your local building department)
  • Local business registration, where it applies

Who oversees Oregon electricians

Licensing authority

Oregon Building Codes Division (BCD)

503-378-4133

oregon.gov/bcd

What the board does

  • Licenses Electrical Contractors and the three individual levels: Limited Residential, General Journeyman and General Supervising
  • Reviews applications and schedules exams for approved applicants
  • Publishes Oregon’s amendments to the National Electrical Code
  • Requires continuing education ahead of each renewal

Oregon electrician license: common questions

Do you need a license for electrical work in Oregon?

Yes. If you’re paid for electrical work of any kind in Oregon, you need a license.

How many hours does an Oregon journeyman electrician license require?

You can finish an approved Oregon apprenticeship. Or you can document 8,000 on-the-job hours and 576 classroom hours earned outside Oregon, including no less than 1,000 hours each in commercial, industrial and residential work.

How do you become a General Supervising Electrician in Oregon?

You need an Oregon journeyman license (or the qualifications for one) plus documentation of 8,000 more hours of on-the-job journeyman experience.

Is the Oregon electrician exam open book?

Yes. You get 240 minutes for 64 questions, a score of 75% passes, and you can tab and highlight your references.

Do Oregon supervising, journeyman and residential electrician applicants take different exams?

No. All three sit for one Oregon Electrical exam. Electrical Contractors complete a 16-hour pre-license course and then take a separate Contractor exam.

Does Oregon offer reciprocity for electrician licenses?

Just for the General Supervising Electrician license, and only with Utah and Arkansas.

Is continuing education required for an Oregon electrician license?

Yes. You need continuing education ahead of every renewal.

Where this information comes from

  1. Oregon Building Codes Division, Electrical program
  2. Oregon Building Codes Division, Oregon amendments to the 2026 NEC (PDF)
  3. Oregon Revised Statutes chapter 479
  4. Oregon Administrative Rules division 918 (including OAR 918-282-0180)
  5. Oregon Building Codes Division, Electrical License Application (Form 440-2570)
  6. Oregon Building Codes Division, License Reapplication (Form 440-2574)
  7. Oregon Building Codes Division, Single or Combination Contractor License Application (Form 440-2888)
  8. ORS 479.840, electrical license fees

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Oregon Building Codes Division.