North Dakota Low Voltage License: Requirements, Exam and How to Apply, North Dakota Low Voltage License, North Dakota, Contracting Power Limited Electrician, Power Limited Electrician of Record, Non-contracting Power Limited Electrician, North Dakota State Electrical Board, how to get a North Dakota Low Voltage License, North Dakota Low Voltage License requirements, North Dakota Low Voltage License exam, North Dakota licensing board, North Dakota contractor license, license application steps, exam reference books, Power limited exam, Only supervised work

Home Licenses Low Voltage License North Dakota

Low Voltage License · Power Limited Electrician

North Dakota Low Voltage License: Requirements, Exam and How to Apply

In North Dakota, the State Electrical Board licenses low voltage work as power limited electrical work. This guide covers qualifying, the three license categories, the exam and renewing.

Last updated October 27, 2026 from North Dakota State Electrical Board requirements

Exam time

4.5 hrs

Books allowed, pass with 70%

Time to get license

~2.5 yrs

Takes 6,000 registered apprentice hours, over at least 2.5 years

Continuing ed

8 hrs

Due ahead of every renewal

Do you need a North Dakota low voltage license?

Yes. Before you bid or do any power limited electrical work in North Dakota, you need a license from the State Electrical Board.

You need the license when

  • You bid on power limited electrical jobs
  • You do power limited electrical work
  • You serve as power limited electrician of record for your company’s own property
  • You carry liability insurance and contract for power limited work

Exceptions

  • Once registered, a power limited apprentice may work under any of these: a master of record, a contracting master, a power limited electrician of record or a contracting power limited
  • A non-contracting power limited electrician doesn’t work independently; they’re supervised by a contracting or of-record licensee

What happens if you work unlicensed

We couldn’t confirm penalty amounts. Generally, North Dakota’s electrical laws, rules and wiring standards are enforced by the State Electrical Board, which can act against unlicensed work.

How to get a North Dakota low voltage license in 6 steps

  1. Register as a power limited apprentice Before you start
    Get on the Board’s apprentice register. Then work under one of these licensees: a master of record, a contracting master, a power limited electrician of record or a contracting power limited.
  2. Log 6,000 hours 2.5+ years
    You can’t finish the experience in under 2.5 years. It has to be power limited work done in a place whose licensing and inspection rules are similar to North Dakota’s.
  3. Apply to the Board
    File a completed, signed application with the North Dakota State Electrical Board and pay the $50 application fee. The power limited license fee adds $50 more.
  4. Sign up for the exam After you apply
    When the Board approves your application, it emails you an exam invite with the test dates still open.
  5. Pass the exam Test day
    You get 4.5 hours, books allowed, and need 70% to pass. Codebooks, calculators and pencils are supplied by the Board.
  6. Get your license After you pass
    Once you pass, the Board issues your power limited license. Expect 8 hours of CE before every renewal.

North Dakota low voltage application checklist

Your North Dakota application on one page

  • Registration as a power limited apprentice
  • 6,000 documented experience hours over 2.5+ years
  • Completed, signed application
  • $50 application fee plus the $50 license fee
  • A test date picked from your Board invite
  • Proof of liability insurance (if contracting or of record)

North Dakota low voltage license classes

All power limited electricians have the same experience requirement. Your category comes down to whether you contract, work for a single organization, or work under another licensee’s supervision.

CPL Runs own jobs

Contracting Power Limited Electrician

Must show proof of liability insurance and is responsible for following North Dakota’s laws, rules and wiring standards.

ExamPower limited exam
LimitNot stated

PLER In-house

Power Limited Electrician of Record

Handles an organization’s power limited work under that organization’s liability insurance, only on property it owns or leases.

ExamPower limited exam
LimitOnly the organization’s property

NCPL Employee

Non-contracting Power Limited Electrician

Works on power limited jobs while supervised by a contracting master, a master of record, a contracting power limited electrician or a power limited electrician of record.

ExamPower limited exam
LimitOnly supervised work

Requirements for each North Dakota low voltage class

All three categories share the same experience and exam. The differences are insurance and supervision.

RequirementContractingElectrician of recordNon-contracting
Experience6,000 hours6,000 hours6,000 hours
Minimum time2.5 years2.5 years2.5 years
Apprentice registrationRequiredRequiredRequired
ExamPass with 70%Pass with 70%Pass with 70%
Liability insuranceMust show proofCovered through the organizationNot published
SupervisionNot requiredNot requiredRequired

The North Dakota low voltage exam

There’s a single open-book exam for power limited electricians. Because the Board hands out codebooks, calculators and pencils, you won’t bring your own tabbed books.

Format

Open book

Questions

Not published

Passing score

70%

Exam vendor

ND State Electrical Board

Scoring and content

  • 4.5 hours to finish, pass with 70%
  • Subjects: the NEC, North Dakota wiring standards, laws, rules and basic electricity
  • The Board supplies codebooks, calculators and pencils
  • Study the booklet called Laws, Rules and Wiring Standards of North Dakota

Retakes

  • We couldn’t confirm the retake rules
  • Pick your exam date from the Board’s emailed invite
  • Check with the Board on retake fees and waiting periods

Books and codes for this exam (open book)

The North Dakota Power Limited Electrician exam is open book. The State Electrical Board provides the codebooks, calculators and pencils on exam day, so you study from your own copies.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2026Allowed in exam
Laws, Rules, and Wiring Standards of North Dakota (print)Not statedAllowed in exam

The Laws, Rules, and Wiring Standards booklet is a free download from the State Electrical Board.

Prep for the North Dakota low voltage exam

Our exam prep course, Total Prep and complete bundle for the North Dakota low voltage exam. Prices are coming soon.

Books for this exam

Renewing your North Dakota low voltage license

You renew a power limited license each year, and it expires on April 30. Before every renewal you need 8 hours of continuing education. If your license expires, reinstating it costs a fee equal to the annual fee.

Renewal cycle

Yearly (expires April 30)

CE hours

8

Renewal fee

$50

Late penalty

A reinstatement fee that matches the annual fee

Licensed in another state?

We couldn’t confirm any formal reciprocity agreements, though the Board may accept credentials or experience from other places.

No reciprocity

We couldn’t confirm any agreements, so expect to apply as a new applicant. Experience counts if it comes from a place with similar licensing and inspection rules, and the Board may approve a license based on power limited education or a tradesman certification it has approved.

City and county rules in North Dakota

The State Electrical Board issues your power limited license, and it’s good across North Dakota. Local governments still have their own permits and business rules.

The state covers

  • Power limited licenses and registering apprentices
  • The power limited exam
  • Wiring standards for North Dakota
  • CE ahead of renewal

Cities and counties cover

  • Building permits, where needed
  • Local business rules

Who oversees power limited electricians in North Dakota

Licensing authority

North Dakota State Electrical Board

701-328-9522

ndseb.com

What the board does

  • Issues licenses for power limited electricians
  • Registers apprentices in the power limited trade
  • Gives the exam
  • Writes the Laws, Rules and Wiring Standards of North Dakota

North Dakota low voltage license: common questions

Do I need a license for low voltage work in North Dakota?

Yes. You need a North Dakota State Electrical Board license as a power limited electrician before you bid or do any work.

How many hours do I need for a North Dakota power limited license?

You need 6,000 hours as a registered power limited apprentice, and you can’t complete them in under 2.5 years.

Is the North Dakota power limited exam open book?

Yes. You get 4.5 hours and need 70% to pass. Codebooks, calculators and pencils are supplied by the Board.

How do I schedule the North Dakota power limited exam?

Send your application to the Board. After approval, it emails you an invite listing the exam dates you can pick.

What’s the difference between a contracting and non-contracting power limited license in North Dakota?

If you’re contracting, you carry liability insurance and run your own jobs. If you’re non-contracting, you work under a contracting or of-record licensee’s supervision.

Is continuing education required for a North Dakota power limited license?

Yes, 8 hours ahead of each renewal.

Where this information comes from

  1. North Dakota State Electrical Board
  2. Laws, Rules, and Wiring Standards of North Dakota (PDF)
  3. N.D. Admin. Code ch. 24.1-03-01, Licensing Requirements (PDF)
  4. NDSEB Electrician’s License Renewal

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the North Dakota State Electrical Board.