North Carolina Low Voltage License: Requirements, Exam and How to Apply, North Carolina Low Voltage License, North Carolina, Fire Alarm / Low Voltage, North Carolina State Board of Examiners of Electrical Contractors, how to get a North Carolina Low Voltage License, North Carolina Low Voltage License requirements, North Carolina Low Voltage License exam, North Carolina licensing board, North Carolina contractor license, license application steps, exam reference books, FALV exam, Minimum age, Experience, Primary experience, Character references, Business

Home Licenses Low Voltage License North Carolina

Low Voltage License · Fire Alarm / Low Voltage

North Carolina Low Voltage License: Requirements, Exam and How to Apply

In North Carolina, low voltage work is licensed under a special restricted electrical contractor classification called Fire Alarm / Low Voltage (FALV). This guide covers its scope, how you qualify, the PSI exam and renewing.

Last updated October 27, 2026 from North Carolina State Board of Examiners of Electrical Contractors requirements

Exam time

3 hrs

Open book, 50 questions

Time to get license

3,000 hrs

You need 2,000 or more hours of primary experience

Continuing ed

Not stated

Renewal is yearly

Do you need a North Carolina low voltage license?

Yes. Contracting for low voltage wiring work in North Carolina requires the Fire Alarm / Low Voltage license from the NCBEEC. The license is limited to low voltage wiring and wiring directly related to it.

You need the license when

  • You’re a contractor who installs, maintains or repairs low voltage wiring
  • You work on fire alarm systems
  • You wire from the load side of a disconnect or junction box, installed by someone else, that feeds the low voltage system

Exceptions

  • This license doesn’t cover line-side connections to the disconnect or junction box; someone else has to make them
  • It doesn’t cover wiring in places the National Electrical Code classifies as hazardous

What happens if you work unlicensed

We couldn’t confirm penalty amounts. Generally, the NCBEEC enforces the state’s electrical contractor law (General Statutes Chapter 87, Article 4), and it can discipline licensees and take action against anyone contracting without a license.

How to get a North Carolina low voltage license in 6 steps

  1. Gain experience Before you apply
    Rack up 3,000 or more hours of experience. No fewer than 2,000 of them have to be primary; the remainder can be primary, secondary or a mix.
  2. Line up your references Before you apply
    Ask at least 2 people who can speak to your good character for written statements.
  3. Apply to the NCBEEC
    Send the NCBEEC your finished application along with the $125 application and exam fee, your references, verified experience, and proof that your North Carolina business is lawful.
  4. Book with PSI Within 30 days
    After approval, you’ll receive scheduling instructions. You have 30 days from your notification letter to take the exam.
  5. Pass the exam Test day
    You get 3 hours for 50 questions, books allowed. A 70% score passes.
  6. Get your license and renew each year Annually
    Once you pass, the Board issues the license. You renew an FALV license every year.

North Carolina low voltage application checklist

Your North Carolina application on one page

  • Proof that you’re 18 or older
  • 3,000 experience hours (2,000 of them primary)
  • Character statements from 2 people
  • Proof your North Carolina business is lawful
  • Finished application and fees
  • PSI exam taken within 30 days of approval

The North Carolina low voltage license

FALV is a special restricted classification. It only covers low voltage wiring and the wiring directly related to it.

SP-FA/LV Special restricted

Fire Alarm / Low Voltage

Lets you install, maintain or repair low voltage wiring, and the wiring directly related to it, beginning at the load side of a marked disconnect or junction box that someone else installed.

ExamFALV exam
LimitNot stated

North Carolina low voltage license requirements

Meet all of these before the Board will approve you for the exam.

RequirementFire Alarm / Low Voltage
Minimum age18
Experience3,000 hours
Primary experienceAt least 2,000 hours
Character referencesWritten statements from 2 people
BusinessProof you run a lawful business in North Carolina
Exam50 questions, pass with 70%

The North Carolina low voltage exam

There’s one FALV exam, given by PSI, and it’s open book. Until further notice, Board exams are still based on the 2020 NEC.

Format

Open book

Questions

50

Passing score

70%

Exam vendor

PSI

Scoring and content

  • 50 questions in 3 hours, pass with 70%
  • Subjects: wiring methods and terminations, bonding and grounding, boxes and fittings
  • Plus: laws, rules and business practices, load calculations, and motors and control wiring
  • Bring these references: 21 NCAC 18B, GS Chapter 87 Article 4, NFPA 72, NEC 2020 and NASCLA’s NC electrical business guide
  • Tabs and highlighting are allowed in your references

Retakes

  • For every new attempt, file a Board re-exam application and pay the $125 exam fee
  • The Board has to pre-approve you before you test
  • Your test has to happen within 30 days of the notification letter
  • Reach PSI at 855-746-8173

Books and codes for this exam (open book)

The North Carolina Fire Alarm / Low Voltage exam is open book, and the permitted references can be tabbed and highlighted. The two state law documents are free to print and bring with your books.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2020Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code2013Allowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management, North Carolina Electrical14th editionAllowed in exam
North Carolina General Statutes Chapter 87, Article 4Not statedAllowed in exam
Title 21, North Carolina Administrative Code, Chapter 18BNot statedAllowed in exam

Board exams stay on the 2020 NEC until further notice, including for candidates testing after July 1, 2025.

Prep for the North Carolina low voltage exam

Our exam prep course, Total Prep and complete bundle for the North Carolina low voltage exam. Prices are coming soon.

Books for this exam

Renewing your North Carolina low voltage license

You renew an FALV license with the NCBEEC every year, paying the $100 special restricted license fee; renewing late costs $25 more. We couldn’t confirm any continuing education hours.

Renewal cycle

Annually

CE hours

Not published

Renewal fee

$100

Late penalty

$25

Licensed in another state?

We couldn’t confirm any reciprocity for the North Carolina FALV license.

No reciprocity

We couldn’t confirm any agreements with other states, so expect to apply as a new applicant and sit for the FALV exam. Check with the NCBEEC first.

City and county rules in North Carolina

The state issues your FALV license. Permits and inspections are still handled by the local building department wherever you work.

The state covers

  • Electrical contractor licenses, FALV included
  • Approving exam candidates and scheduling through PSI
  • Renewals each year
  • Discipline under GS Chapter 87, Article 4

Cities and counties cover

  • Electrical permits
  • Inspections
  • Local business rules

Who oversees low voltage contractors in North Carolina

Licensing authority

North Carolina State Board of Examiners of Electrical Contractors

919-733-9042

ncbeec.org

What the board does

  • Issues electrical contractor licenses, FALV included, and renews them
  • Decides which applicants can sit for the exam
  • Writes rules under Title 21 NCAC Chapter 18B
  • Enforces the state’s electrical contractor law

North Carolina low voltage license: common questions

What does a North Carolina low voltage license let me do?

It lets you install, maintain or repair low voltage wiring (and the wiring directly related to it) from the load side of a marked disconnect or junction box that someone else put in. Hazardous locations aren’t included.

How much experience does a North Carolina low voltage license require?

You need 3,000 hours or more, with 2,000 or more of them as primary experience.

Is the North Carolina low voltage exam open book?

Yes. You get 3 hours for 50 questions and need a 70% score. Tabs and highlighting are allowed in the approved references.

Which NEC edition does the North Carolina low voltage exam use?

The 2020 NEC. Because code updates are delayed, Board exams will keep using the 2020 edition until further notice.

Who administers the North Carolina low voltage exam?

PSI does. After the Board approves your application, you’ll receive instructions to schedule, and you have 30 days to test.

How often does a North Carolina low voltage license renew?

Once a year.

Where this information comes from

  1. NC State Board of Examiners of Electrical Contractors
  2. PSI, NCBEEC exam information
  3. NC General Statutes Chapter 87, Article 4
  4. Title 21 NCAC Chapter 18B
  5. NCBEEC, Fees and services
  6. NCBEEC, Examination application (PDF)
  7. NC General Statutes § 87-44, Fees and license term

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the North Carolina State Board of Examiners of Electrical Contractors.