
Home Licenses HVAC License North Carolina
HVAC License · Contractor & Technician
North Carolina HVAC License: Requirements, Exam and How to Apply
HVAC work in North Carolina is divided into three Heating Groups, and each one has both contractor and technician licenses. Here you’ll learn which group fits your work, what experience and exams each requires, and how to apply with the state Board.
Last updated October 27, 2026 from North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors requirements
Exam time
4 hrs
For the trade exam; Business & Law adds 90 min
Time to get license
~2 yrs
Takes 4,000 hours of experience (technicians need 18 months)
Continuing ed
Not required
Heating Group licenses have no CE requirement
Do you need a North Carolina HVAC license?
Yes. The State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors licenses North Carolina heating and air conditioning work under three Heating Groups. The group you need comes down to the kind of system and how much cooling capacity it has.
You need the license when
- For water-based comfort heating (steam, vapor or hot water) that you install, repair or service: Heating Group 1
- For forced-air heating or cooling systems with refrigeration capacity over 15 tons: Heating Group 2
- Heating Group 3 covers you for systems of 15 tons or less, along with single-family detached homes of every size
- Fuel piping qualifications come with every Heating Group license
Exceptions
- Technicians can’t contract on their own. They work under an H1, H2 or H3 contractor as a sub-licensee.
- If you only work on single-family detached homes, you can get a Class 2 license (Groups 1 and 3) in place of Class 1.
- We couldn’t confirm any other exemptions in the law, so if you’re not sure your work is covered, ask the Board.
What happens if you work unlicensed
We couldn’t confirm penalty amounts. Heating contractors and technicians are licensed and regulated by the Board, and working without a license, or outside your license group, can bring Board action. Talk to the Board before you bid on or accept a job.
How to get a North Carolina HVAC license in 6 steps
- Pick your Heating Group and class Before you start
Group 1 is water-based heating; Group 2 is forced air above 15 tons; Group 3 is 15 tons or less along with every single-family home. Once you know your group, choose Class 1, Class 2 or Technician. - Gain experience ~2 years
For contractors, it’s 2 years (4,000 hours) of full-time work in the category, and related academic or technical training (45 quarter or 30 semester hours) can count for up to half. For technicians, it’s 18 months (3,000 hours) on the job. - Apply to the Board Before the exam
Your application goes to the Board, together with verified education and work experience. Questions? Call 919-875-3612 or visit nclicensing.org. - Watch for your approval letter Test within 30 days
After approval, the Board mails you a written notice explaining how to schedule. You have 30 days from the date on that letter to sit for the exam. - Pass your exams with PSI Test day
Take the 4-hour open-book trade exam. Contractors also take Business & Law (40 questions, 90 minutes). Each one needs a 70% score. Schedule at psiexams.com. - Get your license After you pass
After you pass your exams, the Board issues your Heating Group license.
North Carolina HVAC application checklist
Your North Carolina application on one page
- Heating Group (1, 2 or 3) and class picked
- Verified experience: 2 years (4,000 hrs), or 18 months if you’re a technician
- Transcripts, if school counts toward your experience
- Application sent to the Board
- PSI exam taken within 30 days of approval
- Passing scores on both the trade exam and Business & Law
North Carolina HVAC license classes
Choose a Heating Group based on the system type and size, then choose a class. Class 1 lets you work in any building type, while Class 2 is only for single-family detached homes. With a technician license, you work under a contractor in the same group.
H1 Class 1 Hydronic
Heating Group 1 Contractor, Class 1
Comfort heating with steam, vapor or hot water (including its piping, ducts and equipment) in any residential, commercial, industrial or institutional building.
| Exam | H1 + B&L |
| Limit | Any building type |
H1 Class 2 Homes only
Heating Group 1 Contractor, Class 2
Covers the same water-based heating work, but only in single-family detached homes.
| Exam | H1 + B&L |
| Limit | Single-family only |
H1 Tech No contracting
Heating Group 1 Technician
Acts as a sub-licensee of an H1 contractor, working on wet or water-based comfort heating.
| Exam | H1 |
| Limit | Works under an H1 contractor |
H2 Large systems
Heating Group 2 Contractor
Covers forced-air heating and cooling with mechanical refrigeration capacity above 15 tons. No matter how large, single-family homes belong to Group 3.
| Exam | H2 + B&L |
| Limit | Over 15 tons |
H2 Tech No contracting
Heating Group 2 Technician
Works on forced-air systems above 15 tons as a sub-licensee under an H2 contractor.
| Exam | H2 |
| Limit | Works under an H2 contractor |
H3 Class 1 Most popular
Heating Group 3 Contractor, Class 1
Covers systems and units up to 15 tons in every building type, along with all single-family detached home systems of any size.
| Exam | H3 + B&L |
| Limit | 15 tons or less |
H3 Class 2 Homes only
Heating Group 3 Contractor, Class 2
Covers Group 3 work, but only in single-family detached homes.
| Exam | H3 + B&L |
| Limit | Single-family only |
H3 Tech No contracting
Heating Group 3 Technician
Works on forced-air systems up to 15 tons as a sub-licensee under an H3 contractor.
| Exam | H3 |
| Limit | Works under an H3 contractor |
Requirements for each North Carolina HVAC class
All three Heating Groups have the same experience rules. The difference is the exam you take and where you’re allowed to work.
| Requirement | Contractor, Class 1 | Contractor, Class 2 | Technician |
|---|---|---|---|
| Experience | 2 years (4,000 hrs), full time | 2 years (4,000 hrs), full time | 18 months (3,000 hrs) on the job |
| School credit | As much as half (2,000 hrs) | As much as half (2,000 hrs) | Not stated |
| Exams | Trade + Business & Law | Trade + Business & Law | Trade exam |
| Where you can work | Any building type | Single-family detached homes | Under a licensed contractor |
| Groups offered | H1, H2, H3 | H1, H3 | H1, H2, H3 |
| Continuing ed | Not required | Not required | Not required |
| Minimum age | Not stated | Not stated | Not stated |
The North Carolina HVAC exam
If you’re a contractor, you sit for two exams: Business & Law and the trade exam for your Heating Group. You can use books on both, and tabs and highlighting are allowed in the approved references.
Format
Open book
Questions
Trade: Not published · B&L: 40
Passing score
70%
Exam vendor
PSI
Scoring and content
- Heating Group trade exam: 4 hours, pass with 70%
- Business & Law: 40 questions in 90 minutes, pass with 70%
- Business & Law covers licensing, liens and bonds, paying subcontractors, erosion and sedimentation control, and One Call
- For the trade exam, you’ll use the 2018 NC State Building Codes (Mechanical, Fuel Gas, Energy, Residential, Administrative) and ACCA Manuals (J, D, Q, N or CS, based on your group)
- Under HB 47, the 2024 NC Building Codes won’t take effect until spring 2027
Retakes
- To retake, file a Board re-examination application and pay a $150 re-exam fee for each exam
- Your test has to happen within 30 days of the approval letter
- Already passed this Board’s Business & Law exam after August 2003 and hold an active contractor license with it? Then you skip Business & Law
- Reach PSI at 855-746-8173 or psiexams.com
Books and codes for this exam (open book)
The Heating Group 1, 2 and 3 exams and the Business and Law exam are all open book, and the approved references can be tabbed and highlighted. Class II candidates in Groups 1 and 3 bring a shorter list (Manual J, Manual D, the slide rule, the Administrative and Residential codes, plus Modern Refrigeration for Group 3) than Class I candidates.
| Reference | Edition | How it’s used |
|---|---|---|
| ACCA Manual J: Residential Load Calculation — Groups 1 and 3 | 8th edition | Allowed in exam |
| ACCA Manual D: Residential Duct Systems — Groups 1 and 3 | 3rd edition | Allowed in exam |
| ACCA Manual CS: Commercial Applications, Systems, and Equipment — Group 1 Class I and Group 2 | Not stated | Allowed in exam |
| ACCA Manual Q: Low Pressure, Low Velocity Duct System Design — Group 1 Class I, Group 2 and Group 3 Class I | Not stated | Allowed in exam |
| ACCA Manual N: Commercial Load Calculation for Small Commercial Buildings — Group 1 Class I, Group 2 and Group 3 Class I | 5th edition | Allowed in exam |
| ACCA Duct Calculation Slide Rule — all heating exams | Not stated | Allowed in exam |
| Modern Refrigeration and Air Conditioning — Groups 2 and 3 | 22nd edition | Allowed in exam |
| North Carolina State Building Code: Energy Conservation Code — Group 1 Class I, Group 2 and Group 3 Class I | 2018 | Allowed in exam |
| North Carolina State Building Code: Fuel Gas Code — Group 1 Class I, Group 2 and Group 3 Class I | 2018 | Allowed in exam |
| North Carolina State Building Code: Mechanical Code — Group 1 Class I, Group 2 and Group 3 Class I | 2018 | Allowed in exam |
| North Carolina State Building Code: Administrative Code and Policies — all heating exams | 2018 | Allowed in exam |
| North Carolina State Building Code: Residential Code — Groups 1 and 3 | 2018 | Allowed in exam |
| Uniform Boiler and Pressure Vessel Act (NC General Statutes Chapter 95, Article 7A) — Group 1 Class I | Not stated | Allowed in exam |
| NC Board Laws and Rules for Plumbing, Heating, and Sprinklers — Business and Law exam | Not stated | Allowed in exam |
| NASCLA Contractor’s Guide to Business and Project Management for Plumbing, Heating, and Sprinklers (North Carolina) — Business and Law exam | Not stated | Allowed in exam |
The 2024 North Carolina Building Codes have been delayed until sometime in spring 2027, so the 2018 North Carolina codes listed here are the ones to use for now.
Prep for the North Carolina HVAC exam
Our exam prep course, Total Prep and complete bundle for the North Carolina HVAC exam. Prices are coming soon.
Books for this exam
-

Manual CS: Commercial Applications, Systems, and Equipment
Price coming soon -

Manual D: Residential Duct Systems, 3rd edition
Price coming soon -
![Manual J: Residential Load Calculation (8th Edition - Full) [ANSI/ACCA 2 Manual J-2016] (photo coming soon)](https://lindenprep.com/wp-content/uploads/woocommerce-placeholder.webp)
Manual J: Residential Load Calculation (8th Edition – Full) [ANSI/ACCA 2 Manual J-2016]
Price coming soon -

Manual N: Commercial Load Calculation, 5th edition
Price coming soon -

Manual Q: Low Pressure, Low Velocity Duct System Design
Price coming soon -

Modern Refrigeration and Air Conditioning
Price coming soon -

North Carolina State Building Code: Administrative Code and Policies 2018
Price coming soon -

Uniform Boiler and Pressure Vessel Act (North Carolina General Statutes, Chapter 95, Article 7A)
Price coming soon -

Book Tabs
Price coming soon
Renewing your North Carolina HVAC license
You don’t need continuing education to keep a Heating Group license in North Carolina. Every license expires December 31; contractors pay $150 to renew, and after January 31 there’s a $25 late fee.
Renewal cycle
Annually (Dec 31)
CE hours
None required
Renewal fee
$150 per year
Late penalty
$25
Licensed in another state?
North Carolina doesn’t have reciprocity agreements for Heating Group licenses.
No reciprocity
HVAC licenses from other states aren’t accepted for Heating Groups 1, 2 or 3. You apply like any new applicant: document your experience and pass the exams.
City and county rules in North Carolina
The state Board issues your Heating Group license. Permits and inspections on each job are up to the city or county.
The state covers
- Contractor and technician licenses for Heating Groups 1, 2 and 3
- Reviewing applications and approving exam candidates
- Exams (given by PSI)
- The NC State Building Codes that your work has to meet
Cities and counties cover
- Mechanical permits for every job
- Inspecting systems once they’re installed
- Local business rules, where they apply
Who oversees HVAC contractors in North Carolina
Licensing authority
North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors
919-875-3612
What the board does
- Issues contractor and technician licenses for Heating Groups 1, 2 and 3
- Checks applications and confirms experience before it approves exams
- Decides the experience each license requires
- Oversees licensees and can act when rules are broken
North Carolina HVAC license: common questions
Which North Carolina Heating Group license do I need for residential HVAC?
Heating Group 3. It covers single-family detached homes of any size, plus any system of 15 tons or less. If single-family homes are all you work on, a Class 2 license will do.
What’s the difference between Heating Group 2 and Group 3 in North Carolina?
Group 3 handles systems of 15 tons or less and all single-family homes. Group 2 handles forced-air systems whose refrigeration capacity is above 15 tons.
How much experience do I need for a North Carolina HVAC license?
For contractors: 2 years (4,000 hours) of full-time work, with related schooling counting for as much as half. For technicians: 18 months (3,000 hours).
Are the North Carolina HVAC license exams open book?
Yes, both of them: the Heating Group exam and Business & Law. Tabs and highlighting are allowed in the approved references, and each exam takes a 70% score to pass.
Is the Business & Law exam required for a North Carolina HVAC license?
For contractors, yes. The exception is if this Board has already given you an active contractor license and you passed its Business & Law exam after August 2003.
Is continuing education required for a North Carolina HVAC license?
No. Heating Group licenses don’t have a CE requirement.
Does North Carolina accept HVAC licenses from other states?
No. Heating Group licenses have no reciprocity agreements in North Carolina, so you apply as new and take the exams.
Where this information comes from
- North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors
- PSI Exams
- NCGS Chapter 95, Article 7A, Uniform Boiler and Pressure Vessel Act (PDF)
- NC Board Laws and Rules for Plumbing, Heating, and Fire Sprinkler Contractors
- North Carolina State Building Code: Mechanical Code 2018
- HB 47, delaying the 2024 North Carolina Building Codes
- NC Plumbing, Heating and Fire Sprinkler Board, Plumbing, Heating and Fuel Piping exam application (PDF)
- PSI, North Carolina Plumbing, Heating and Fire Sprinkler candidate information bulletin (PDF)
- NC Plumbing, Heating and Fire Sprinkler Board, License activation form (PDF)
- NC Plumbing, Heating and Fire Sprinkler Board, 2027 renewal invoice (PDF)
- NC Plumbing, Heating and Fire Sprinkler Board, Re-examination application (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors.