
Home Licenses Gas Fitter License North Carolina
Fuel Piping · Fuel Piping & Fuel Distribution
North Carolina Gas Fitter License: Requirements, Exam and How to Apply
This guide explains North Carolina’s Fuel Piping license: who has to get one and what qualifying, testing and applying look like with the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors.
Last updated October 27, 2026 from North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors requirements
Exam time
3.5 hrs
Fuel Piping runs 120 min; Business and Law runs 90 min
Time to get license
~1 yr
Takes 2,000 hours of experience, and schooling can cover up to half
Continuing ed
Not required
Renewal has no CE requirement
Do you need a North Carolina gas fitter license?
You need the Fuel Piping license to bid or contract fuel piping work in North Carolina if you don’t hold a plumbing or heating license. It covers piping that runs from an approved fuel source at or near the premises to the systems, equipment or appliances inside.
You need the license when
- You don’t hold a Class I or Class II plumbing or heating license, but you bid or contract fuel piping work
- You put in fuel piping starting at an approved fuel source at or near the premises
- The piping feeds fuel to systems, equipment or appliances inside
Exceptions
- If you hold a Plumbing and Heating Group 1, 2 or 3 license, fuel piping privileges are already part of it, and there’s no separate exam
- Fuel Distribution (PU) work calls for a different license with its own exam
What happens if you work unlicensed
We couldn’t confirm penalty amounts. The Board licenses plumbing, heating and fuel piping contractors across the state and can act against unlicensed contracting. Ask the Board about the current rules.
How to get a North Carolina gas fitter license in 5 steps
- Build your experience ~1 year
Log 2,000 hours installing, maintaining, servicing or repairing fuel piping. Related academic or technical training can count for up to 1,000 of those hours. - Apply to the Board Before the exam
Head to nclicensing.org and file with the Board. Include your verified education and work experience. - Watch for your approval letter Test within 30 days
If you’re approved, the Board sends written scheduling instructions. You have 30 days from the notification letter to sit for the exam. - Pass both exams with PSI Test day
Fuel Piping is open book, lasts 120 minutes and needs 70% to pass. Business and Law has 40 questions in 90 minutes and also needs 70%. PSI’s number is 855-746-8173. - Get your license After you pass
The Board issues your North Carolina Fuel Piping license after you’ve met every requirement.
North Carolina gas fitter application checklist
Your North Carolina application on one page
- Proof of 2,000 hours of fuel piping work
- School transcripts, if you’re counting training hours
- Finished Board application with verified experience
- Exam taken within 30 days of the approval letter
- Passing scores (70%) on both Fuel Piping and Business and Law
North Carolina gas fitter license classes
Fuel Piping is its own license, meant for contractors without a plumbing or heating license. Hold one of those already? Then fuel piping is probably covered.
Fuel Piping Most popular
Fuel Piping
Lets you contract for and put in fuel piping, starting at an approved fuel source at or near the premises and ending at the systems, equipment or appliances inside.
| Exam | Fuel Piping + B&L |
| Limit | Not stated |
PU Own exam
Fuel Distribution
This license has its own exam. The sources we checked don’t describe its scope or requirements.
| Exam | Fuel Distribution exam |
| Limit | Not stated |
P / H Already covered
Plumbing & Heating Groups 1–3
Plumbing and Heating Group 1, 2 and 3 licenses include fuel piping privileges, so you don’t take a separate fuel piping exam.
| Exam | No extra exam |
| Limit | Not stated |
Requirements for each North Carolina gas fitter class
This compares the Fuel Piping license with the Fuel Distribution (PU) license. Detailed requirements are only available for the Fuel Piping license.
| Requirement | Fuel Piping | Fuel Distribution (PU) |
|---|---|---|
| Experience | 1 year (2,000 hours) of fuel piping work | Not stated |
| Schooling credit | Up to 1,000 hours (from 22 quarter or 15 semester hours) | Not stated |
| Trade exam | Fuel Piping, pass with 70% | Its own exam is required |
| Business and Law | Required, pass with 70% | Not stated |
| Exam window | Within 30 days of the approval letter | Not stated |
| Continuing education | Not required | Not stated |
The North Carolina gas fitter exam
Most people sit for two exams, both open book: Fuel Piping, and Business and Law. Tabs and highlighting are allowed in the approved references.
Format
Open book
Questions
40 (B&L); Fuel Piping not published
Passing score
70%
Exam vendor
PSI
Scoring and content
- Fuel Piping: 120 minutes, pass with 70%
- Business and Law covers erosion control, licensing, paying subcontractors, liens and bonds, and One Call, with 40 questions in 90 minutes and 70% to pass
- You’ll use the Board’s Laws and Rules plus the North Carolina State Building Code volumes for Fuel Gas, Residential, Mechanical and Administrative (2018)
- The 2024 North Carolina Building Codes won’t take effect until spring 2027
- Already passed this Board’s Business and Law exam after August 2003 and hold an active license with it? Then you don’t take Business and Law again
Retakes
- To retake, file a Board re-examination application and pay a $150 re-exam fee for each exam
- Sit for the exam within 30 days of the approval letter
- You need pre-approval before you can schedule
Books and codes for this exam (open book)
The North Carolina Fuel Piping exam and the Business and Law exam are both open book, and you can tab and highlight the approved references you bring in. The list below covers both exams.
| Reference | Edition | How it’s used |
|---|---|---|
| North Carolina State Building Code: Fuel Gas Code | 2018 | Allowed in exam |
| North Carolina State Building Code: Residential Code | 2018 | Allowed in exam |
| North Carolina State Building Code: Mechanical Code | 2018 | Allowed in exam |
| North Carolina State Building Code: Administrative Code and Policies | 2018 | Allowed in exam |
| NC Board Laws and Rules for Plumbing, Heating, and Sprinklers — Business and Law exam | Not stated | Allowed in exam |
| NASCLA Contractor’s Guide to Business and Project Management for Plumbing, Heating, and Sprinklers (North Carolina) — Business and Law exam | Not stated | Allowed in exam |
The 2024 North Carolina Building Codes have been delayed until sometime in spring 2027, so the 2018 North Carolina codes listed here are the ones to use for now.
Prep for the North Carolina gas fitter exam
Our exam prep course, Total Prep and complete bundle for the North Carolina gas fitter exam. Prices are coming soon.
Books for this exam
Renewing your North Carolina gas fitter license
You don’t need continuing education to renew a Fuel Piping license. Every license expires December 31; renewing costs $150, and after January 31 there’s a $25 late fee.
Renewal cycle
Annually (Dec 31)
CE hours
Not required
Renewal fee
$150 per year
Late penalty
$25
Licensed in another state?
North Carolina doesn’t have reciprocity agreements for Fuel Piping licensees.
No reciprocity
If you’re from another state, you apply like any new applicant: meet the experience requirement and pass both the Fuel Piping and Business and Law exams.
City and county rules in North Carolina
Your Fuel Piping license comes from the Board and is good statewide. Permits and inspections are still up to local inspection departments.
The state covers
- Fuel Piping, Fuel Distribution, plumbing and heating licenses
- Reviewing applications and approving exam candidates
- Exams (given by PSI)
- Disciplining licensees
Cities and counties cover
- Permits for fuel gas and mechanical work
- Inspecting fuel piping once it’s installed
- Local enforcement of the North Carolina State Building Code
Who oversees fuel piping contractors in North Carolina
Licensing authority
North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors
919-875-3612
What the board does
- Issues licenses for Fuel Piping, plumbing, heating and fire sprinklers
- Checks applications and confirms experience
- Approves who can take the PSI exams
- Manages renewals and discipline
North Carolina gas fitter license: common questions
Do I need a North Carolina Fuel Piping license if I already have a plumbing or heating license?
Usually not. Fuel piping privileges come with Plumbing and Heating Group 1, 2 and 3 licenses, and there’s no extra exam.
How much experience does a North Carolina Fuel Piping license require?
1 year (2,000 hours) of fuel piping work. Related academic or technical training can make up as much as half of it.
Is the North Carolina Fuel Piping exam open book?
Yes. You get 120 minutes, the passing score is 70%, and tabs and highlighting are allowed in the approved references.
Is the Business and Law exam required for a North Carolina Fuel Piping license?
Most applicants must. You’re exempt only if this Board has already licensed you (the license is active) and you passed its Business and Law exam after August 2003.
How long do I have to take the North Carolina Fuel Piping exam after approval?
You have 30 days from the date on your notification letter.
Does a North Carolina Fuel Piping license require continuing education?
No. You can renew a Fuel Piping license without any CE.
Does North Carolina accept fuel piping licenses from other states?
No. There are no reciprocity agreements for Fuel Piping licensees in North Carolina.
Where this information comes from
- North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors
- PSI, North Carolina Plumbing, Heating and Fire Sprinkler candidate information
- North Carolina State Building Code: Fuel Gas Code (2018)
- NC Board Laws and Rules for Plumbing, Heating, and Fire Sprinkler Contractors
- NC Plumbing, Heating and Fire Sprinkler Board, Plumbing, Heating and Fuel Piping exam application (PDF)
- PSI, North Carolina Plumbing, Heating and Fire Sprinkler candidate information bulletin (PDF)
- NC Plumbing, Heating and Fire Sprinkler Board, License activation form (PDF)
- NC Plumbing, Heating and Fire Sprinkler Board, 2027 renewal invoice (PDF)
- NC Plumbing, Heating and Fire Sprinkler Board, Re-examination application (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors.
