New York Specialty Contractor License: Requirements, Exam and How to Apply, New York Specialty Contractor License, New York, Worker Site Safety Training Card, Supervisor Site Safety Training Card, Retake policy, New York City, New York City Department of Buildings, how to get a New York Specialty Contractor License, New York Specialty Contractor License requirements, New York Specialty Contractor License exam, New York licensing board, New York contractor license, license application steps, exam reference books, NYC job sites, Total training, OSHA course

Home Licenses Specialty Contractor License New York

Site Safety Training Card · Worker & Supervisor

New York Specialty Contractor License: Requirements, Exam and How to Apply

Many New York City job sites require construction workers and supervisors to carry a Site Safety Training (SST) card from the Department of Buildings. This guide covers the Worker and Supervisor cards: how many training hours you need, what the training includes and how renewal works.

Last updated October 27, 2026 from New York City Department of Buildings requirements

Exam time

Not stated

You earn the card by completing training hours

Time to get license

40–62 hrs

Workers need 40 hours; supervisors need 62

Continuing ed

8–16 hrs

Take a refresher in the 12 months before your card expires

Do you need a New York specialty contractor license?

You need a card rather than a license. On New York City sites that require a Site Safety Plan and a designated Construction Superintendent, Site Safety Coordinator or Site Safety Manager, you must have an SST card. People in those supervisor roles need the Supervisor card.

You need the license when

  • You do construction or demolition work on an NYC site where a Site Safety Plan is required
  • A Site Safety Manager, Site Safety Coordinator or Construction Superintendent has been assigned to the job
  • You’re the Site Safety Manager, Site Safety Coordinator or Construction Superintendent yourself, which means you need the Supervisor card

Exceptions

  • Job sites with no Site Safety Plan requirement and no designated superintendent or safety coordinator
  • The SST card is required in New York City only, not statewide

Working without an SST card

We couldn’t confirm the penalty amounts. As a rule, the Department of Buildings enforces site safety rules on NYC job sites, so check that your card is current before you show up at a covered site.

How to get a New York specialty contractor license in 6 steps

  1. Pick your card Before you start
    The Worker card takes 40 hours. If your job is superintendent, Site Safety Coordinator or Site Safety Manager, you need the Supervisor card, which takes 62 hours.
  2. Choose a DOB-approved provider Before you train
    Hours count toward your card only when the course comes from a provider the Department of Buildings has approved.
  3. Take your OSHA course Training
    Workers complete 10-Hour OSHA, and supervisors complete 30-Hour OSHA.
  4. Complete the remaining hours Training
    That means Fall Prevention, Site Safety, Supported Scaffold, Drug and Alcohol Awareness and your electives, plus the added supervisor topics if you’re a supervisor.
  5. Get your SST card After training
    Apply for the card through the Department of Buildings. If you have questions, call 212-566-5000 or go to the NYC Department of Buildings website.
  6. Renew before your card expires Within 12 months of expiry
    Complete the SST Refresher with a DOB-registered provider: 8-hour for workers or 16-hour for supervisors.

New York specialty contractor application checklist

Everything for your New York SST card on one page

  • Figure out which card you need: Worker or Supervisor
  • A training provider approved by the DOB
  • 10-Hour OSHA for workers or 30-Hour OSHA for supervisors
  • Courses in Fall Prevention, Site Safety, scaffolds, and drug and alcohol awareness
  • General and special electives finished
  • Your refresher date on the calendar before the card expires

New York specialty contractor license classes

You can get one of two SST cards, depending on your role on the site. Your training has to come from a course provider approved by the DOB.

SST Worker Most common

Worker Site Safety Training Card

Meant for the workers on any site where the rules call for a Site Safety Plan and a designated superintendent or safety coordinator.

Exam40 hrs training
LimitNYC job sites

SST Supervisor Supervisors

Supervisor Site Safety Training Card

For Site Safety Managers, Site Safety Coordinators and Construction Superintendents.

Exam62 hrs training
LimitNYC job sites

Requirements for each New York specialty contractor class

Most courses are the same for both cards. The Supervisor card adds the 30-hour OSHA course and four short supervisor topics on top.

RequirementWorker cardSupervisor card
Total training40 hours62 hours
OSHA course10-Hour OSHA30-Hour OSHA
Fall Prevention8 hours8 hours
Site Safety8 hours8 hours
Scaffold and Drug & Alcohol4-Hour Supported Scaffold and 2-Hour Drug & Alcohol4-Hour Supported Scaffold and 2-Hour Drug & Alcohol
Supervisor topicsNot requiredSite Safety Plan, Toolbox Talks and Pre-Task Safety Meetings, 2 hrs each
Electives4 general and 4 special4 general and 4 special
Refresher to renew8 hours16 hours

The New York specialty contractor exam

You get the SST card by finishing DOB-approved training hours. We couldn’t confirm a separate state exam, so ask your course provider whether the course includes any assessments.

Format

DOB-approved training courses

Questions

Not stated

Passing score

Not stated

Exam vendor

Not stated

Scoring & content

  • Worker: 40 hours, 10-Hour OSHA included
  • Supervisor: 62 hours, 30-Hour OSHA included
  • Both cards: 8-Hour Site Safety, 8-Hour Fall Prevention, 2-Hour Drug and Alcohol Awareness and 4-Hour Supported Scaffold
  • Both cards: 4 hours of special electives and 4 hours of general electives
  • Supervisors only: Toolbox Talks, Pre-Task Safety Meetings and Site Safety Plan, 2 hours each

Retake policy

  • We couldn’t confirm any retake rules
  • Your training has to come from a DOB-approved provider
  • Check with your provider about what happens if you fail or don’t finish a course module

Books and codes for this exam

The state hasn’t published a reference list for this exam in the sources we checked. Check the candidate bulletin from the exam vendor before you buy books.

Prep for the New York specialty contractor exam

Our exam prep course and Total Prep for the New York specialty contractor exam. Prices are coming soon.

Books for this exam

Renewing your New York specialty contractor license

Renewing means taking the SST Refresher from a DOB-registered course provider in the 12 months before your card expires. The refresher is 8 hours for workers and 16 hours for supervisors.

Renewal cycle

Not stated

CE hours

8 for workers / 16 for supervisors

Renewal fee

Not stated

Late penalty

Not stated

Licensed in another state?

The SST card is required by New York City, and we couldn’t confirm any card from another city or state that can take its place.

No reciprocity agreements

Workers from outside the area finish the DOB-approved training hours just like any new applicant.

City and county rules in New York

This is a city rule. You need the card on New York City job sites, but the rest of New York State doesn’t require it.

State handles

  • Statewide licensing for other trades (but not the SST card)
  • We couldn’t confirm any state role in SST cards

What the city handles

  • SST card rules on NYC job sites
  • Approving the providers of SST training
  • Issuing SST cards
  • Site Safety Plans and enforcing site safety

New York City

Department of Buildings

  • Required wherever a site needs a Site Safety Plan plus a designated superintendent or safety coordinator
  • Worker card: 40 hours of training approved by the DOB
  • Supervisor card: 62 hours of training approved by the DOB
  • Renew by taking an 8-hour (worker) or 16-hour (supervisor) refresher

Who oversees site safety training in New York City

Licensing authority

New York City Department of Buildings

212-566-5000

nyc.gov/site/buildings

What the board does

  • Sets the SST training rules for NYC job sites
  • Approves and registers the SST course providers
  • Issues the Site Safety Training cards
  • Enforces the site safety rules

New York specialty contractor license: common questions

Who needs an SST card in New York City?

You need one if you work on a site that requires a Site Safety Plan and a designated Construction Superintendent, Site Safety Coordinator or Site Safety Manager. People in those supervisor roles need the Supervisor card.

How many hours of training is the NYC Worker SST card?

The Worker card takes 40 hours of training from a DOB-approved provider. That covers 10-Hour OSHA, 8-Hour Fall Prevention and 8-Hour Site Safety, along with scaffold training, drug and alcohol awareness, and electives.

How many hours of training is the NYC Supervisor SST card?

It takes 62 hours. That includes 30-Hour OSHA and the added supervisor topics: Toolbox Talks, Pre-Task Safety Meetings and the Site Safety Plan.

Can you take NYC SST training online?

Yes, as long as the Department of Buildings has approved the provider. Training from anyone else doesn’t count toward the card.

How do you renew an NYC SST card?

Take the SST Refresher from a DOB-registered provider in the 12 months before your card expires. It’s 8 hours for workers and 16 hours for supervisors.

Is the SST card required everywhere in New York State?

No. The New York City Department of Buildings requires it for job sites in NYC only.

Is there an exam for the NYC SST card?

We couldn’t confirm a separate exam. You earn the card by finishing the required training hours.

Where this information comes from

  1. New York City Department of Buildings
  2. NYC Department of Buildings, Site Safety Training card requirements
  3. NYC Department of Buildings, SST Refresher training requirements

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New York City Department of Buildings.