New York Low Voltage License: Requirements, Exam and How to Apply, New York Low Voltage License, New York, Examination & education, Experience & education, Statewide waiver, Retake policy, New York Department of State, Division of Licensing Services, how to get a New York Low Voltage License, New York Low Voltage License requirements, New York Low Voltage License exam, New York licensing board, New York contractor license, license application steps, exam reference books, Fire alarm exam, Waived, Minimum age, Education, Proof of education, Not required

Home Licenses Low Voltage License New York

Low Voltage License · Security & Fire Alarm

New York Low Voltage License: Requirements, Exam and How to Apply

New York treats low voltage alarm work under the Department of State’s security or fire alarm installer license. This guide covers who needs it, the three qualifying routes, the exam and the application.

Last updated October 27, 2026 from New York Department of State, Division of Licensing Services requirements

Exam time

2.5 hrs

150-minute multiple-choice exam

Time to get license

Varies

Either 81 hours of approved coursework or 2 years (3,500 hours) of experience

Continuing ed

Not stated

Ask the Division of Licensing Services

Do you need a New York low voltage license?

It is if your work involves installing, servicing or maintaining security or fire alarm systems. Systems that detect fire, sound, movement, intrusion or break-ins fall under New York’s General Business Law (Article 6-D) and the Department of State’s rules (19 NYCRR).

You need the license when

  • You put in security or fire alarm systems
  • You maintain or service alarm systems that are already installed
  • Your systems detect fire, sound, motion, intrusion or break-ins
  • You hold a master electrician license and want to do alarm work (filing with the Department of State is still required)

Exceptions

  • A licensed master electrician can skip the exam and education route with a waiver, though filing is still required
  • This license doesn’t apply to work that has nothing to do with security or fire alarm systems

What happens if you work unlicensed

We couldn’t confirm the penalty amounts. As a rule, the Department of State can deny, suspend or revoke licenses and act against unlicensed alarm work, so get licensed before you accept any jobs.

How to get a New York low voltage license in 6 steps

  1. Choose how you’ll qualify Before you start
    Pick one: 81 hours of coursework plus the exam, 2 years of alarm experience, or the master electrician waiver.
  2. Complete your education or document your experience Before you apply
    Finish 81 or more hours of course study recognized by the Department of State, or collect proof of 3,500 hours spent installing, servicing or maintaining fire alarm systems.
  3. Pass the state exam Exam day
    The Division of Licensing Services gives the exam at test centers in the state’s larger cities. It lasts 150 minutes, uses multiple choice and is scored pass/fail.
  4. Get fingerprinted Before you apply
    Get fingerprinted electronically through an approved vendor, and hold on to the receipt for your application.
  5. Submit your application
    Mail the Division of Licensing Services your signed application, the fee, your exam pass letter, the fingerprint receipt and proof of education. Respond quickly if they ask for more.
  6. Receive your license After review
    You can begin alarm work as soon as the Department of State approves your file.

New York low voltage application checklist

Everything for the New York application on one page

  • Proof that you’re 18 or older
  • 81 hours of coursework recognized by DOS, or 3,500 hours of experience
  • Passed exam letter
  • Electronic fingerprinting receipt
  • A signed application and the fee

New York low voltage license classes

New York has a single state license for alarm installers. The difference is the route you take to qualify: education plus the exam, experience plus education, or a waiver for master electricians.

EXAM Most common

Examination & education

Finish 81 or more hours of coursework recognized by the Department of State, then pass the state exam.

ExamFire alarm exam
LimitNot stated

EXP Field experience

Experience & education

Your proof of education plus 2 years (3,500 hours) or more of hands-on fire alarm work: installing systems, servicing them or keeping them maintained.

ExamNot stated
LimitNot stated

ME-S Master electricians

Statewide waiver

If you’re a licensed master electrician, you can file one application that covers the whole state. Include proof of your master license and say where you hold it.

ExamWaived
LimitNot stated

ME-L Master electricians

Local registration only

The other option for a master electrician is a local registration, limited to the jurisdictions that issued the master license.

ExamWaived
LimitNot stated

Requirements for each New York low voltage class

No matter the route, you file a signed application, pay the fee and get fingerprinted. Then you prove one of three things: coursework and a passed exam, field experience, or a master electrician license.

RequirementExam & educationExperience & educationMaster electrician waiver
Minimum age18Not statedNot stated
Education81 hours of coursework recognized by DOSProof of educationNot required
ExperienceNot required2 years (3,500 hours)A current master electrician license
ExamPassed exam letterNot statedWaived
FingerprintingElectronic, approved vendorNot statedElectronic, through an approved vendor (statewide)

The New York low voltage exam

You take one fire alarm exam, scored pass/fail with multiple-choice questions. You can use books, so it pays to tab and highlight your references before test day.

Format

Open book, multiple choice

Questions

Not stated

Passing score

Pass/fail

Exam vendor

NY Division of Licensing Services

Scoring & content

  • 150 minutes, pass/fail scoring
  • Covers basic electricity, codes and standards, control devices and alarm transmission
  • Plus perimeter systems, motion detection, CCTV, access control, fire technology, job planning and job safety
  • Among the references are NEC 2023 (NFPA 70), NFPA 72 (2022) and ICC A117.1-2017
  • You may tab and highlight references

Retake policy

  • We couldn’t confirm the retake rules
  • Test centers are in the larger cities across the state
  • You pay $15 for the written exam; for retake rules and waiting periods, ask the Division of Licensing Services

Books and codes for this exam (open book)

The New York fire alarm installer exam is open book: the references below can be tabbed, highlighted and used during the test. The list covers the Fire Alarm Examination administered by the Department of State, Division of Licensing Services.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2023Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code2022Allowed in exam
NTC Yellow Book: Video Security SystemsNot statedAllowed in exam
NTC Blue Book: Low Voltage SystemsNot statedAllowed in exam
CCTV: From Light to Pixels3rd editionAllowed in exam
ICC A117.1 Standard for Accessible and Usable Buildings and Facilities2017Allowed in exam

Prep for the New York low voltage exam

Our exam prep course, Total Prep and complete bundle for the New York low voltage exam. Prices are coming soon.

Books for this exam

Renewing your New York low voltage license

Licenses last two years. Renewing costs $100 ($50 if you’re a master electrician), and renewing late adds a $60 penalty. We couldn’t confirm any continuing education rules, so ask the Division of Licensing Services before your license expires.

Renewal cycle

Every 2 years

CE hours

Not stated

Renewal fee

$100 ($50 for master electricians)

Late penalty

$60

Licensed in another state?

We couldn’t confirm any reciprocity for alarm installers in New York. Licensed master electricians are the only ones with a shortcut.

No reciprocity agreements

We couldn’t confirm any agreements with other states, so expect to apply as a new applicant. If you’re a licensed master electrician, you can file under the waiver instead.

City and county rules in New York

The state issues the alarm installer license. Master electricians, though, have the option to register only in the local jurisdictions where their master license is held.

State handles

  • Licenses for security and fire alarm installers
  • The fire alarm exam
  • Recognizing courses for the 81-hour education requirement
  • Filings under the master electrician waiver

What cities & counties handle

  • Master electrician licenses
  • Local-only registration for master electricians
  • Permits and inspections

Who oversees New York alarm installers

Licensing authority

New York Department of State, Division of Licensing Services

518-474-4429

dos.ny.gov/security-or-fire-alarm-installer

What the board does

  • Issues licenses for security and fire alarm installers
  • Runs the fire alarm exam
  • Recognizes the course study you need
  • Handles master electrician waiver filings

New York low voltage license: common questions

Do you need a license to install security systems in New York?

Yes. If you install, service or maintain security or fire alarm systems, you must be licensed by the Division of Licensing Services within the Department of State.

How many hours of education does a New York alarm installer license require?

On the exam route, you need 81 or more hours of course study that the Department of State recognizes.

Can you qualify for a New York alarm license with experience instead?

Yes. Show your education along with 2 years (3,500 hours) or more of hands-on work installing, servicing or maintaining fire alarm systems.

Is the New York fire alarm installer exam open book?

Yes. The exam lasts 150 minutes, uses multiple choice and is scored pass/fail. You may tab and highlight the approved references.

Do master electricians need a New York alarm installer license?

Filing with the Department of State is still required. They can register statewide or for local jurisdictions only, and they attach a copy of the master electrician license they hold now.

Do you need fingerprints for a New York alarm installer license?

Yes. If you’re on the exam route or filing a statewide waiver, you submit a receipt showing you were fingerprinted electronically by an approved vendor.

Where this information comes from

  1. NY Department of State, Security or Fire Alarm Installer
  2. New York General Business Law, Article 6-D
  3. New York Codes, Rules and Regulations, Title 19 (19 NYCRR)
  4. NY Department of State, Get a Security or Fire Alarm Installer License (fees)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New York Department of State, Division of Licensing Services.