Nevada Specialty Contractor License: Requirements, Exam and How to Apply, Nevada Specialty Contractor License, Nevada, Carpentry, Maintenance & Minor Repairs, Painting & Decorating, Painting, Nevada State Contractors Board, how to get a Nevada Specialty Contractor License, Nevada Specialty Contractor License requirements, Nevada Specialty Contractor License exam, Nevada licensing board, Nevada contractor license, license application steps, exam reference books, Set by the Board, Experience, Shown in your application, Qualifying Party, Required

Home Licenses Specialty Contractor License Nevada

Specialty Contractor · C-3 Carpentry & C-4 Painting

Nevada Specialty Contractor License: Requirements, Exam and How to Apply

Two Nevada specialty classifications are covered here: C-3 Carpentry, Maintenance and Minor Repairs, and C-4 Painting and Decorating, which also has a narrower C-4A Painting license. You’ll see what the Nevada State Contractors Board wants from you, which exams you take and how to keep your license active.

Last updated October 27, 2026 from Nevada State Contractors Board requirements

Exam time

4 hrs

Your trade exam + the Contractor Management Survey (3 hrs for C-4A)

Time to get license

Varies

It depends on the experience you document for the Board

Continuing ed

Not required

You don’t need CE to renew

Do you need a Nevada specialty contractor license?

Yes. The Nevada State Contractors Board licenses carpentry, drywall, insulation, overhead door, painting and wallcovering work. You choose the classification that fits what you do, qualify through a Qualifying Party and pass two exams.

You need the license when

  • Cabinets, millwork, wood floors, framing, siding, roof decking or finish carpentry (C-3)
  • Insulation, caulking, weather stripping or firestop systems (C-3)
  • Drywall, acoustical tile, nonstructural metal framing or overhead door installs (C-3)
  • Wallcovering, painting, staining and coatings on buildings (C-4 or C-4A)

Exceptions

  • Tile and stone work aren’t part of C-3 finish carpentry
  • C-4A is limited to paint and coatings, so it doesn’t cover drywall or wallcovering

What happens if you work unlicensed

We couldn’t confirm penalty amounts. As a rule, the Nevada State Contractors Board can look into unlicensed contracting and discipline those involved, so get your license before you bid or start a job.

How to get a Nevada specialty contractor license in 6 steps

  1. Pick your classification Before you start
    Decide whether your work fits C-3, C-4 or C-4A. Each one comes with its own trade exam.
  2. Set up your business Before you apply
    Register the business with the Nevada Secretary of State and choose a Qualifying Party for the license.
  3. Ask to sit for the exams Before the exam
    Apply online through the Board’s website. Send your work and education records with it so the Board can evaluate your experience.
  4. Watch for your eligibility letter After approval
    Once you’re approved, the Board mails you a Candidate Eligibility letter along with a PSI registration form and directions for scheduling.
  5. Pass both PSI exams Exam day
    Book online at candidate.psiexams.com or call 855-205-5827. You’ll take the Contractor Management Survey and your trade exam.
  6. Complete your license application Final step
    To get licensed, send the Board your financial statement, proof of insurance if your classification needs it, and everything else the application asks for.

Nevada specialty contractor application checklist

Everything for the Nevada application on one page

  • Nevada Secretary of State business registration
  • A Qualifying Party named for the license
  • Work and education records that show your experience
  • A current financial statement
  • General liability insurance proof (C-4 and C-4A)
  • Passing scores on the Contractor Management Survey and your trade exam

Nevada specialty contractor license classes

Every classification has a trade exam of its own, and everyone takes the Contractor Management Survey too. Based on your application, the Board sets the level and amount of work you’re allowed to do.

C-3 Several trades

Carpentry, Maintenance & Minor Repairs

A mix of trades: general and finish carpentry, repairs, drywall, overhead doors, insulation and weather stripping.

ExamC-3 + CMS
LimitSet by the Board

C-4 Broadest painting

Painting & Decorating

Covers paint, stain, varnish, wax and coatings, wallcovering and surface prep, along with drywall, metal studs and acoustical tile.

ExamC-4 + CMS
LimitSet by the Board

C-4A Paint only

Painting

Covers applying paints, stains, varnishes, shellacs, protective coatings and other pigment with a brush, roller or sprayer.

ExamC-4A + CMS
LimitSet by the Board

Requirements for each Nevada specialty contractor class

These classifications share the same application basics. Only the trade exam is different.

RequirementC-3C-4C-4A
ExperienceShown in your applicationShown in your applicationShown in your application
Qualifying PartyRequiredRequiredRequired
Secretary of State registrationRequiredRequiredRequired
Financial statementA current statementA current statementA current statement
General liability proofNot statedRequiredRequired
Trade exam60 questions, 2 hrs50 questions, 2 hrs30 questions, 1 hr
Contractor Management SurveyRequiredRequiredRequired

The Nevada specialty contractor exam

PSI gives you two exams: the Contractor Management Survey (business and law) and the trade exam for your classification. You can use books on the C-3 and CMS. The C-4 and C-4A painting exams don’t allow books.

Format

On computer at PSI test centers

Questions

30–60 trade + 60 CMS

Passing score

70% trade, 45 of 60 CMS

Exam vendor

PSI

Scoring and content

  • C-3: open book, 60 questions in 2 hours, and you need 42 right. Topics are safety, insulation, doors and windows, rough and finish carpentry, drywall and siding
  • C-4: closed book, 50 questions in 2 hours, and you need 35 right. Topics are materials, surface prep, application, tools, problems, safety, drywall and color
  • C-4A: closed book, 30 questions in 1 hour, and you need 21 right
  • Contractor Management Survey: open book, 60 scored questions and 3 unscored ones in 120 minutes, and you need 45 right
  • You can bring the 2018 International Building Code to the C-3 exam

Retakes

  • If you fail a portion, wait 2 weeks before you retake it
  • Every retake needs a new PSI registration: $95 for a single portion or $140 for the trade exam and CMS together
  • Fail a third time and your application is void, so you’ll have to reapply with the Board
  • PSI won’t schedule you until the Board pre-approves you
  • Call PSI at 855-205-5827 to reschedule or book a retake
  • You’ll find test centers in Nevada’s bigger cities

Books and codes for this exam (varies)

The C-3 Carpentry, Maintenance and Minor Repairs exam is open book, with approved references you can tab, highlight and bring in, while the C-4 and C-4A painting exams are closed book, so their books are for study only. Every applicant also takes the open-book Contractor Management Survey (CMS) exam.

ReferenceEditionHow it’s used
International Building Code (IBC) — C-3 exam2018Allowed in exam
OSHA 1926 Construction Industry Regulations — C-3, C-4 and C-4A examsNot statedStudy only
Carpentry and Building Construction, Student Edition — C-3 exam2016Study only
Building Component Safety Information (BCSI) — C-3 examNot statedStudy only
The Gypsum Construction Handbook — C-3 exam7th editionStudy only
Finish Carpenter’s Manual — C-3 examNot statedStudy only
PDCA Craftsman Manual & Textbook — C-4 and C-4A exams8th editionStudy only
Nevada Construction Business and Law Manual — Contractor Management Survey examNot statedAllowed in exam

Prep for the Nevada specialty contractor exam

Our exam prep course, Total Prep and complete bundle for the Nevada specialty contractor exam. Prices are coming soon.

Books for this exam

Renewing your Nevada specialty contractor license

You don’t need continuing education to renew these Nevada licenses. They renew every 2 years for $600, and renewing late costs an extra $150.

Renewal cycle

Every 2 years

CE hours

Not required

Renewal fee

$600

Late penalty

$150

Licensed in another state?

Some of Nevada’s reciprocity agreements can waive a trade exam. The partner states we found differ by classification, so ask the Board which agreement covers yours.

Arizona: trade exam waiver

Applies to the C-4 painting trade exams.

California: trade exam waiver

Applies to the C-4 painting trade exams.

Utah: trade exam waiver

Applies to the C-4 painting trade exams.

Arkansas, Louisiana, Mississippi & Tennessee: reciprocity

Applies to the C-3 classification. Check with the Board on what gets waived.

City and county rules in Nevada

The state issues your Nevada license, but permits and inspections are handled by the city or county where the job is.

What the state handles

  • Contractor licenses and classifications
  • Exam approval and eligibility letters
  • Deciding the level and amount of work you can take on
  • Disciplining licensees

What cities and counties handle

  • Permits and inspections
  • Local business licenses
  • Enforcing local codes

Who licenses specialty contractors in Nevada

Licensing authority

Nevada State Contractors Board

702-486-1100

nvcontractorsboard.com

What the board does

  • Issues contractor licenses and handles renewals
  • Reviews your experience and decides what work you can do
  • Approves who can take the PSI exams
  • Disciplines license holders

Nevada specialty contractor license: common questions

What does a Nevada C-3 contractor license cover?

Finish carpentry, general carpentry and repairs, insulation, weather stripping, overhead doors and drywall. Tile and stone aren’t part of finish carpentry.

What’s the difference between the Nevada C-4 and C-4A licenses?

C-4 lets you paint and also do wallcovering, surface prep, drywall, metal studs and acoustical tile. C-4A only covers applying paints, stains, coatings and similar finishes.

How many exams do you take for a Nevada specialty contractor license?

Two, both through PSI: the Contractor Management Survey and the trade exam for your classification.

Are the Nevada specialty contractor exams open book?

You can use books on the C-3 and the Contractor Management Survey. The C-4 and C-4A painting exams are closed book.

What score do you need to pass the Nevada specialty contractor exams?

You need 42 of 60 for C-3, 35 of 50 for C-4 and 21 of 30 for C-4A. On the Contractor Management Survey, you need 45 of the 60 scored questions.

Do Nevada specialty contractor licenses require continuing education?

No. You don’t need CE to renew these licenses in Nevada.

Does Nevada have reciprocity for specialty contractor licenses?

With some states, yes. For the painting trade exams, the list includes Arizona, California and Utah; for C-3, it’s Arkansas, Louisiana, Mississippi and Tennessee. Check with the Board before you apply.

Where this information comes from

  1. Nevada State Contractors Board, Contractor applications
  2. PSI, Candidate exam scheduling
  3. Nevada State Contractors Board, C-3 and C-4 classification scopes
  4. PSI, Nevada Contractor Management Survey exam outline
  5. Nevada State Contractors Board, License application form
  6. Nevada State Contractors Board, Applying for a contractor’s license brochure
  7. Nevada Administrative Code chapter 624 (NAC 624.130 fees)
  8. PSI, Nevada C classification candidate information bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Nevada State Contractors Board.