Nevada Fire Protection License: Requirements, Exam and How to Apply, Nevada Fire Protection License, Nevada, Fire Detection Contractor, Retake policy, Nevada State Contractors Board, how to get a Nevada Fire Protection License, Nevada Fire Protection License requirements, Nevada Fire Protection License exam, Nevada licensing board, Nevada contractor license, license application steps, exam reference books, Set by the Board, Experience, Bond, Financials, Insurance, Industrial insurance plus workers’ comp, Minimum age, Allowed in exam, Study only

Home Licenses Fire Protection License Nevada

C-2C Fire Detection · Contractor

Nevada Fire Protection License: Requirements, Exam and How to Apply

In Nevada, fire alarm and detection contractors hold a C-2C license. Here’s the experience, exams, bond and paperwork the Nevada State Contractors Board wants to see before you bid or start work.

Last updated October 27, 2026 from Nevada State Contractors Board requirements

Exam time

4 hrs

C-2C trade exam (2 hrs) plus the Contractor Management Survey (2 hrs)

Time to get license

~4 yrs

4 years working as a journeyman, foreman, supervisor or contractor

Continuing ed

Not stated

We couldn’t confirm any CE requirement

Do you need a Nevada fire protection license?

You do. Before you bid on or perform any fire detection work in Nevada, you need a C-2C license. It covers heat and smoke sensors and alarms along with the wiring that goes with them.

You need the license when

  • Installing, altering or repairing electrical heat or smoke sensors and alarms
  • Running the wiring and appurtenances for those detection systems
  • Bidding on fire detection jobs, even before work begins

Exceptions

  • We couldn’t confirm any exemptions, so ask the Board before doing unlicensed work
  • Served as a qualified employee in the same classification on another Nevada license in the last 5 years? Then the experience certificates are waived. The license itself is not.

What happens if you work unlicensed

We couldn’t confirm any penalty amounts. What’s clear is that you must be licensed by the Nevada State Contractors Board before bidding or working, and the Board can go after contractors who aren’t.

How to get a Nevada fire protection license in 6 steps

  1. Get your 4 years of experience Before you apply
    You need at least 4 years in fire detection as a journeyman, foreman, supervising employee or contractor. The experience paperwork isn’t needed if you qualify by endorsement or were a qualified employee on another Nevada C-2C license within 5 years.
  2. Apply with the Board online Before the exams
    File your application on the Nevada State Contractors Board website. If you have questions, call 702-486-1100.
  3. Receive your Candidate Eligibility letter After approval
    Once you’re approved, you’ll get a Candidate Eligibility letter in the mail, along with a PSI registration form and instructions for scheduling.
  4. Pass both PSI exams Exam day
    Schedule through PSI or by calling 855-205-5827. You’ll sit for the C-2C exam and the Contractor Management Survey exam at a test center in a larger city.
  5. Get your bond and insurance in place Before you’re licensed
    The Board decides how large your bond must be; you can post it as cash or a surety bond. You also need proof of workers’ comp and industrial insurance.
  6. Wrap up and get your license Once you pass
    Finish the last steps with the Board, which include your financial statement and bank verification form.

Nevada fire protection application checklist

Nevada’s application on one page

  • 4 years of C-2C experience, or a waiver
  • Online application filed with the Board
  • Passing scores on the C-2C exam and the Contractor Management Survey
  • A cash or surety bond for the amount the Board sets
  • A financial statement and a bank verification form
  • Proof of industrial insurance and workers’ comp

The Nevada fire protection license

Nevada treats fire detection as a separate subclassification. You pass the C-2C trade exam and the Contractor Management Survey exam that all Nevada contractors take.

C-2C Fire detection

Fire Detection Contractor

Covers electrical heat and smoke detection: sensors, alarms, and the wiring and appurtenances that go with them. You can install, alter and repair them.

ExamC-2C + Contractor Management Survey
LimitSet by the Board

Nevada fire protection license requirements

Every applicant passes both exams and posts a bond. The difference is whether you need to document your experience.

RequirementNew applicantPrior qualifier or endorsement
Experience4 years in C-2C as a journeyman, foreman, supervising employee or contractorNo Certificates and Resume of Experience needed
ExamsC-2C trade + Contractor Management SurveyC-2C trade + Contractor Management Survey
BondCash or surety bond; the Board sets the amountCash or surety bond; the Board sets the amount
FinancialsA financial statement and a bank verification formA financial statement and a bank verification form
InsuranceIndustrial insurance plus workers’ compIndustrial insurance plus workers’ comp
Minimum ageNot statedNot stated

The Nevada fire protection exam

There are two exams, both open book, and each runs 2 hours: the C-2C trade exam and the Contractor Management Survey on the business side.

Format

Open book

Questions

55 + 60

Passing score

39/55 and 45/60

Exam vendor

PSI

Scoring and content

  • C-2C: 2 hours for 55 questions; you need 39 correct to pass
  • Topics on the C-2C exam: detectors, alarm notification, power supply, grounding, wiring, regulations and general electrical knowledge
  • Contractor Management Survey: 2 hours for 60 questions; you need 45 correct to pass
  • On the CMS, expect contracts, risk, safety, tax and labor law, finance, lien law, estimating and licensing
  • You may bring NEC 2017, NFPA 72 (2013) and NFPA 101, among other references, and you can tab and highlight them

Retake policy

  • Fail a portion and you wait 2 weeks to retake it. Each new registration costs the same as before ($95 for one portion, $140 with the CMS), and failing a third time voids your application
  • PSI handles scheduling at 855-205-5827
  • Review your Candidate Eligibility letter and the PSI instructions before you book again

Books and codes for this exam (open book)

Both Nevada exams are open book: the approved references can be tabbed, highlighted and brought into the test, but online course material isn’t allowed. The list covers the C-2C Fire Detection Contractor trade exam and the Contractor Management Survey (CMS) business and law exam; books marked study only aren’t permitted in the room.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC) — C-2C trade exam2017Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code — C-2C trade exam2013Allowed in exam
NFPA 101: Life Safety Code — C-2C trade exam2015Allowed in exam
NFPA 101: Life Safety Code Handbook — C-2C trade exam2018Allowed in exam
Nevada Construction Business and Law Manual — Contractor Management Survey examNot statedAllowed in exam
Fire Alarm Signaling Systems HandbookNot statedStudy only

Prep for the Nevada fire protection exam

Our exam prep course, Total Prep and complete bundle for the Nevada fire protection exam. Prices are coming soon.

Books for this exam

Renewing your Nevada fire protection license

Your license expires every 2 years, and renewal costs $600 (plus a $150 fee if you file late). We couldn’t confirm whether the C-2C license has a continuing education requirement, so ask the Nevada State Contractors Board before your license expires.

Renewal cycle

Every 2 years

CE hours

Not stated

Renewal fee

$600

Late penalty

$150 late filing fee

Licensed in another state?

You can’t transfer a license to Nevada outright. If your license is from a state Nevada considers substantially equivalent, though, the experience certification can be waived.

Substantially equivalent states: experience certification waived

Hold a license from a state Nevada considers substantially equivalent and you can qualify by endorsement, without the Certificates and Resume of Experience. We couldn’t confirm that the exams are waived.

City and county rules in Nevada

The state issues your C-2C license, and it’s good everywhere in Nevada. Individual jobs go through local building and fire departments.

What the state handles

  • C-2C licensing, bonds and the financial review
  • Eligibility to test, with exams given through PSI
  • Endorsement and experience waivers
  • Enforcement against unlicensed contractors

What cities and counties handle

  • Permits for each job
  • Inspections
  • Local business licenses, if any

Who licenses fire detection contractors in Nevada

Licensing authority

Nevada State Contractors Board

702-486-1100

nvcontractorsboard.com

What the board does

  • Issues contractor licenses, C-2C included, and handles renewals
  • Sets the bond amount for each licensee
  • Approves exam candidates and mails Candidate Eligibility letters
  • Reviews experience, financial statements and requests for endorsement

Nevada fire protection license: common questions

How many exams does a Nevada C-2C fire detection license require?

You take two, both through PSI: the C-2C Fire Detection Contractor exam and the Contractor Management Survey exam.

How much experience do you need for a Nevada fire detection contractor license?

You need at least 4 years of fire detection work as a journeyman, foreman, supervising employee or contractor.

Are the Nevada fire detection license exams open book?

They are. Bring your approved references, with tabs and highlighting if you like.

What score do you need to pass the Nevada fire detection license exams?

You need 39 of 55 correct on the C-2C exam and 45 of 60 on the Contractor Management Survey.

Do you need a bond for a Nevada fire detection license?

You do. The Board sets the amount of your cash or surety bond, and you also need industrial insurance and workers’ comp.

Can you skip the experience paperwork for a Nevada fire detection license?

You can if, within 5 years, you were a qualified employee on another Nevada license in the same classification. You can also skip it by qualifying through endorsement from a substantially equivalent state.

Can you bid on a fire detection job in Nevada before you’re licensed?

No. You need the license in Nevada before you bid or do any work.

Where this information comes from

  1. Nevada State Contractors Board
  2. PSI, Nevada contractor exam catalog
  3. Nevada State Contractors Board, License application packet (fees)
  4. PSI, Nevada Contractors C Classification candidate information bulletin
  5. PSI, Nevada Contractor Management Examination candidate information bulletin
  6. Nevada Administrative Code, NAC 624.130 Fees
  7. Nevada Revised Statutes, NRS 624.283 License expiration and renewal

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Nevada State Contractors Board.