Hawaii Masonry Contractor License: Requirements, Exam and How to Apply, Hawaii Masonry Contractor License, Hawaii, Masonry Contractor, Format & topics, Hawaii Contractors License Board, how to get a Hawaii Masonry Contractor License, Hawaii Masonry Contractor License requirements, Hawaii Masonry Contractor License exam, Hawaii licensing board, Hawaii contractor license, license application steps, exam reference books, Experience, Approved application, Needed before you can schedule exams, Trade exam, Business Law exam, Exam format, Closed book

Home Licenses Masonry Contractor License Hawaii

Masonry Contractor · C-31 Specialty

Hawaii Masonry Contractor License: Requirements, Exam and How to Apply

Here’s what the C-31 Masonry Contractor license in Hawaii covers, which two closed-book exams you’ll sit for, and how to get cleared to test.

Last updated October 27, 2026 from Hawaii Contractors License Board requirements

Exam time

5 hrs

Business Law (180 min) plus the trade exam (120 min)

Time to get license

Not stated

We couldn’t confirm the experience rules

Continuing ed

Not stated

We couldn’t confirm this

Do you need a Hawaii masonry contractor license?

Hawaii covers masonry contracting with the C-31 Masonry Contractor specialty license. You apply with the state, and after approval you sit for the Business Law exam and the C-31 trade exam.

You need the license when

  • You lay brick, block, CMU, stone, marble, granite or veneer, using mortar or not
  • You work with fire clay products, refractories or precast concrete facing panels
  • You do grout, rubble work, concrete fencing, tuckpointing, sandblasting or masonry cleaning
  • You place and finish cement concrete, or do sawing, drilling and coring
  • You inject epoxy into concrete for structural purposes

Exceptions

  • We couldn’t confirm any exemptions for C-31 work
  • Before you bid a project, check with the Board on whether it needs a license

What happens if you work unlicensed

We couldn’t confirm specific penalties. Generally, the Board can act against anyone contracting without the license they need, so have your C-31 in hand before you accept masonry work.

How to get a Hawaii masonry contractor license in 6 steps

  1. Check that the C-31 covers your work Before you start
    Compare your concrete and masonry work against what the C-31 covers.
  2. Send in your application Before the exam
    The state has to approve your completed application, and exams can’t be scheduled until it does.
  3. Study for exams without books Before exam day
    You can’t bring books into the testing room, so learn the material thoroughly.
  4. Pass the C-31 trade exam Exam day
    You get 120 minutes for 60 questions and need 75% to pass.
  5. Pass Business Law Exam day
    You get 180 minutes for 80 questions on contracts, licensing, lien law, taxes and public works law.
  6. Get your license After you pass
    Complete whatever the Board still requires, and your C-31 license is issued.

Hawaii masonry contractor application checklist

Hawaii’s application on a single page

  • Check that your work falls under the C-31
  • State approval of your completed application
  • Passed the C-31 trade exam (75%)
  • Passed the Business Law exam
  • Any Board licensing requirements still left

The Hawaii masonry contractor license

Masonry is among Hawaii’s C-class specialty contractor licenses.

C-31 Specialty

Masonry Contractor

Covers brick, block, stone, veneer, refractories, precast panels, tuckpointing, concrete fencing, placing and finishing concrete, and epoxy injection for structural work.

ExamC-31 + Business Law
LimitNot stated

Hawaii masonry contractor license requirements

These are the C-31 requirements we could confirm. Check anything marked “Not stated” with the Board.

RequirementC-31 Masonry Contractor
ExperienceNot stated
Approved applicationNeeded before you can schedule exams
Trade examC-31: 75% to pass, 60 questions
Business Law exam180 minutes, 80 questions
Exam formatClosed book

The Hawaii masonry contractor exam

You sit for two exams without books: Business Law and the C-31 Masonry Contractor trade exam. Expect roughly 5 hours of testing altogether.

Format

Closed book

Questions

60 + 80

Passing score

75% (trade)

Exam vendor

Not stated

Format & topics

  • C-31: 120 minutes for 60 questions, with 75% needed to pass
  • The C-31 covers estimating and plan reading; concrete block, brick, stone and glass block; grout and mortar; placing and finishing concrete; concrete forms; reinforcing steel; and OSHA safety
  • Business Law: 180 minutes for 80 questions
  • Business Law covers contracts, licensing, lien law, tax laws, risk management and public works law, such as HRS Chapter 103 and Chapter 104

Retakes

  • We couldn’t confirm the retake rules
  • PSI charges $80 per exam, good for one year and not refundable; ask the Board about waiting periods
  • You can’t schedule until your application is approved

Books and codes for this exam (closed book)

Hawaii’s contractor exams are closed book, so you can’t bring any books into the testing room. Use these references to study for the C-31 Masonry trade exam and the Business & Law exam.

ReferenceEditionHow it’s used
International Building Code (IBC) — C-31 Masonry exam2018Study only
Modern Masonry — C-31 Masonry examNot statedStudy only
Carpentry and Building Construction — C-31 Masonry exam2016 student editionStudy only
Contractor’s Guide to Quality Concrete Construction — C-31 Masonry exam4th editionStudy only
OSHA 29 CFR 1926 Construction Industry Regulations — C-31 Masonry examNot statedStudy only
NASCLA Contractor’s Guide to Business, Law and Project Management, Hawaii edition — Business & Law exam1st editionStudy only
Hawaii Revised Statutes Chapter 103, Expenditure of Public Money and Public Contracts — Business & Law examNot statedStudy only
Hawaii Revised Statutes Chapter 104, Wages and Hours of Employees on Public Works — Business & Law examNot statedStudy only
Hawaii Administrative Rules Title 12, Chapter 22, Wage Determinations — Business & Law examNot statedStudy only

Prep for the Hawaii masonry contractor exam

Our exam prep course and complete bundle for the Hawaii masonry contractor exam. Prices are coming soon.

Books for this exam

Renewing your Hawaii masonry contractor license

Contractor licenses run on a 2-year cycle and must be renewed by September 30 of every even-numbered year. Each biennial renewal costs $190 for a sole proprietor or contracting entity, or $60 for a responsible managing employee. On top of that, you pay a $5 education fund fee, a $10 recovery fund fee and a $148 compliance resolution fund fee. You can still renew late for 60 days after that if you pay a $50 penalty.

Renewal cycle

Every 2 years (by Sept 30 in even years)

CE hours

Not stated

Renewal fee

$190

Late penalty

$50

Licensed in another state?

We couldn’t find any reciprocity agreements for the C-31 Masonry license in Hawaii.

No reciprocity in place

We couldn’t find any, so expect to apply as a new applicant and pass both of Hawaii’s exams. Check with the Board on whether a license from another state helps.

City and county rules in Hawaii

The state issues your C-31 license. Building permits and inspections are still up to the counties.

What the state handles

  • C-31 licenses and classifications
  • Approving applications ahead of exams
  • Disciplining license holders

What cities & counties handle

  • Building permits and inspections
  • Local rules that apply to your jobs

The board that licenses Hawaii masonry contractors

Licensing authority

Hawaii Contractors License Board

Contact details aren’t listed in the sources we checked; check the Board’s website

What the board does

  • Grants C-31 and other specialty contractor licenses
  • Approves applications so candidates can test
  • Sets what’s required for the trade and Business Law exams
  • Disciplines license holders

Hawaii masonry contractor license: common questions

Which license do you need for masonry work in Hawaii?

You need the C-31 Masonry Contractor license, which covers brick, block, stone, veneer, refractories, tuckpointing, placing and finishing concrete, and epoxy injection for structural work.

Is the Hawaii masonry contractor license exam open book?

No. You can’t bring books to the C-31 trade exam or to Business Law.

How many questions does Hawaii’s C-31 masonry exam have?

There are 60 questions in 120 minutes, and you need a 75% to pass.

What does the Business Law exam cover for a Hawaii masonry license?

You get 180 minutes for 80 questions covering contracts, licensing, lien law, risk management, taxes and Hawaii public works law.

When can you schedule your Hawaii masonry license exams?

Once the state approves your completed application.

Where this information comes from

  1. Hawaii Contractors License Board, C-31 Masonry Contractor classification
  2. HRS Chapter 103, Expenditure of Public Money and Public Contracts
  3. HRS Chapter 104, Wages and Hours of Employees on Public Works
  4. HAR Title 12, Chapter 22, Wage Determinations (PDF)
  5. HAR Chapter 16-53, DCCA fees (PDF)
  6. Hawaii Contractors License Board, Sole proprietor application (PDF)
  7. PSI, Hawaii Contractor Examinations Candidate Information Bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Hawaii Contractors License Board.